• 한국추진공학회지
• /
• 제16권2호
• /
• pp.10-16
• /
• 2012

지상연소시험용 추력기 노즐의 성능해석을 위하여 노즐유동 특성 및 플룸 구조를 해석한다. 2차원 축소확대 노즐유동을 해석하고, 이를 실험값과 비교하여 해석기법 검증 및 난류모델 선정을 수행한다. k-${\omega}$ SST 난류모델을 사용한 Reynolds-averaged Navier-Stokes 방정식으로 2차원 축대칭 지상연소시험용 노즐을 해석한 결과, 초기 설계된 노즐내부에서 충격파 및 유동박리에 의한 성능저하가 관찰되었다. 이에 노즐 확대부분의 형상을 수정하여 성능 향상을 확인하였다.

• 한국지리정보학회지
• /
• 제8권4호
• /
• pp.123-133
• /
• 2005

본 연구는 측량용 디지털 카메라인 d7 $metric^5$를 이용하여 수렴각을 변화시켜가면서 촬영을 실시하였으며, 표정 시 발생하는 오차를 최소화하기 위해 프로그램 상에서 자동적으로 상호표정 되는 원형표지를 이용하였다. 그리고 사진의조정기법은 해석적 방법 중에서 현재 가장 좋은 정도를 얻을 수 있는 광속조정법(bundle adjustment)를 이용하였다. 또한 대상물과 수렴각간의 기하학적 형태변하에 따른 함수모형화를 통해 최적촬영식을 제시한다. 이러한 연구는 향후 근거리수치사진측량에서 요구하는 정도의 사진촬영과 예상되는 정도를 판단하는데 중요한 자료로 이용될 것으로 판단된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.140-146
• /
• 2002

The tulip-inversion of flames in half-open tubes was investigated experimentally. Experiments was carried out in tubes with various shapes. The image of a flame propagation were pictured by HICCD(High speed intensified CCD) and the dynamic pressure of tubes was measured by a piezo pressure sensor. By analyzing the images of the flame propagation, we found the time and the distance for the occurrence of tulip-inversion. Regardless of the shapes of tubes, time of tulip-inversion are similar and inversely proportional to the burning velocity. But distances have different tendency. In a straight tube, the distance of tulip-inversion increases when the burning velocity increases. But in a converging tube, the distance of tulip-inversion decreases when a burning velocity increases. And the distance of tulip-inversion in a converging tube is much smaller than the distance of tulip-inversion in a straight tube. These results are caused by the deceleration of a flame when the diameter of a hole in open-side of a tube is small. The deceleration causes little effect on the time of tulip-inversion.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.147-150
• /
• 2002

In general, a single gas flow through a converging nozzle is choked when the pressure communications between the downstream and upstream flowfields are broken by the sonic condition of Mach number, M=1. A similar phenomenon may occur In two streams of different stagnation properties flowing side by side in a converging nozzle. In this case, the limiting condition of M=1 for flow choking is no longer applied to such a compound compressible flow. The compound choking phenomenon can be explained by means of a compound sound wave at the nozzle exit. In order to detail the flow characteristics involved in such a compound choking of the two streams, the two-dimensional, compressible, Wavier-Stokes equations have been solved using a fully implicit finite volume method and compared with the results of the one-dimensional theoretical analysis. The computational and theoretical results show that the compound sound wave can reasonably explain the compound choking phenomenon of the two streams in the convergent flow channel.

• 대한기계학회논문집B
• /
• 제21권8호
• /
• pp.1056-1067
• /
• 1997

Present study visualized flow pattern and investigated spray characteristics of twin-fluid atomization with converging-diverging nozzles. Particle sizes were measured by using the Malvern particle analyzer, and the radial size distributions were evaluated by using the tomographic transform technique. The results show that the SMD generally increases in the radial direction at a prescribed liquid flow rate and the increasing rate in the SMD becomes gradual as atomizing gas pressure increases. The SMD decreases as the liquid flow rate increases at a fixed GLR (gas/liquid mass ratio). The atomization performance of the protrusion-type nozzle turned out to be superior to that of the flush-type. However, in the case of the protrusion-type, flow separation occurs outside the liquid delivery tube when the pressure at the gas nozzle chamber is high enough, which may deteriorate the atomization performance.

• 지역연구
• /
• 제13권2호
• /
• pp.45-54
• /
• 1997

A regional economy is characterized as a spatial economy. However the literature shows that it has been treated as a point economy since space is little recognized in regional modeling due to mathematical complication. This leads to the fact that regional model does not sufficiently represent regional characteristic. This paper attempts to construct a regional growth model in a partial equilibrium framework specifically taking into consideration land as a primary factor. The model is formulated largely neoclassical. Labor is assumed to move in response to differences in the wage rate, while capital is perfectly mobile across regions. The paper shows that two growth equilibrium points exist, one stable equilibrium point and the other unstable equilibrium point. The unstable growth equilibrium indicates the existence of minimum threshold that a region must overcome the minimum threshold to grow constantly. Consequently, directions of regional growth are characterized by two growth paths depending on the initial condition of a region. That is to say, a region below the minimum threshold is converging toward the lower stable equilibrium point over time. When a regional economy initially lies above the minimum threshold, it will grow forever. A regional economy is not thus necessarily converging a stationary is not thus necessarily converging a stationary equilibrium point through factor movement. Finally, the impacts of the presence of agglomeration economies and diseconomies are analyzed through the phase diagram. The paper also shows that agglomeration economies result in lowering the minimum threshold and in escalating the level of stable equilibrium However, when agglomeration diseconomies prevail, the results are opposite, i.e., rising the minimum threshold of growth and lowering the growth level of stable equilibrium.

• Human Ecology Research
• /
• 제58권4호
• /
• pp.561-583
• /
• 2020

This study developed and implemented a teaching · learning process plan for Home Economics in middle school by converging Habermas's three systems of action. It also examined the effect of the class through the evaluation of students and teachers who participated in the class. This study developed 10 sessions for a teaching and learning process plan by converging three systems of action and reconstructing learning elements related to 'balanced meal plan' and 'food choice' according to the practical action teaching model. After class, we surveyed the degree of help for students, analyzed the learning activity sheets, and analyzed the reflection journals of teachers to evaluate the effects of the class. This class was found to be the most helpful in practicing the healthy dietary life of students, expanding their thoughts, understanding learning contents, and helping them change their lives. As a result of analyzing the learning activity sheet, students gained enlightenment by reflecting and evaluating their action through the class; in addition, changes in interest, awareness, and action appeared. Through the convergence of three systems of action, teachers who practiced the class criticized and realized the act that students were unconsciously accepted. In addition, it confirmed the possibility that students could change their lives, family and society by promoting optimal nutrition and health for a good life that pursues the best good.

• 한국추진공학회지
• /
• 제9권2호
• /
• pp.70-77
• /
• 2005

축소-팽창 디퓨저가 장착된 초음속 이젝터를 제작하여, 다양한 위치에서의 측정된 압력으로 부유동의 초음속 시동조건을 찾아내었다. 우선 부유동 흡입구의 크기의 영향을 알아내기 위하여 다양한 흡입구 직경으로 실험하였으며, 부유동의 초음속 시동은 흡입구 직경과 축소-팽창 디퓨저 직경의 비, d/D가 0.306 미만인 경우에만 일어났다. 이보다 큰 d/D에서는, 아음속 시동이 먼저 시작되고, 흡입구를 막으면서 주유동의 유입이 전 유동장을 채우게 되어 수직 충격파를 축소-팽창 디퓨저의 하류로 내려보내게 된다 이러한 상황에서 다시 흡입구를 열어도 히스테리시스의 영향으로 초음속 시동이 유지된다.

• 센서학회지
• /
• 제28권1호
• /
• pp.36-40
• /
• 2019

Energy harvesting is an advantageous technology for wireless sensor networks (WSNs) that dispenses with the need for periodic replacement of batteries. WSNs are composed of numerous sensors for the collection of data and communication; hence, they are important in the Internet of Things (IoT). However, due to low power generation and energy conversion efficiency, harvesting technologies have so far been utilized in limited applications. In this study, a piezoelectric energy harvester was modeled in a vibration environment. This harvester has an oval-shaped configuration as compared to the conventional cantilever-type piezoelectric energy harvester. An analytical model based on an equivalent circuit was developed to appraise the advantages of the oval-shaped piezoelectric energy harvester in which several structural parameters were optimized for higher output performance in given vibration environments. As a result, an oval-shaped energy harvester with an average output power of 2.58 mW at 0.5 g and 60 Hz vibration conditions was developed. These technical approaches provided an opportunity to appreciate the significance of autonomous sensor networks.

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.483-497
• /
• 2023

This study aims to provide strategic recommendations for promoting the development of the global satellite data services industry by analyzing the startup landscape. Based on the analysis of startup data, such as number of startups, market segment, and funding amount, we examined the paradigm shift in the global satellite data services market, particularly its convergence with other market segments. To this end, we derived the cumulative funding-convergence dynamics matrix, which classifies the converging areas into four quadrants by considering the growth rate of converging segments and the cumulative funding amount. In this way, we can specify converging areas in the satellite data services market that bear potential importance for the creation of new markets. The findings of this study are expected to contribute to the advancement of the satellite data services industry and facilitate the exploration of new market opportunities. Furthermore, they can serve as a valuable reference for policy makers, industry stakeholders, government officials, and researchers involved in the satellite data services industry in capitalizing on the emerging space economy.