• Journal of Applied Biological Chemistry
• /
• v.58 no.3
• /
• pp.219-226
• /
• 2015

The anticancer activity of a methanolic extract from lemon leaves (MLL) was assessed in MCF-7-SC human breast cancer stem cells. MLL induced apoptosis in MCF-7-SC, as evidenced by increased apoptotic body formation, sub-G1 cell population, annexin V-positive cells, Bax/Bcl-2 ratio, as well as proteolytic activation of caspase-9 and caspase-3, and degradation of poly (ADP-ribose) polymerase (PARP) protein. Concomitantly, MLL induced the formation of acidic vesicular organelles, increased LC3-II accumulation, and reduced the activation of Akt, mTOR, and p70S6K, suggesting that MLL initiates an autophagic progression in MCF-7-SC via the Akt/mTOR pathway. Epithelial-mesenchymal transition (EMT), a critical step in the acquisition of the metastatic state, is an attractive target for therapeutic interventions directed against tumor metastasis. At low concentrations, MLL induced anti-metastatic effects on MCF-7-SC by inhibiting the EMT process. Exposure to MLL also led to an increase in the epithelial marker E-cadherin, but decreased protein levels of the mesenchymal markers Snail and Slug. Collectively, this study provides evidence that lemon leaves possess cytotoxicity and anti-metastatic properties. Therefore, MLL may prove to be beneficial as a medicinal plant for alternative novel anticancer drugs and nutraceutical products.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.137-143
• /
• 2018

In this study, two types of SKD61 tool-steel samples are built by a selective laser melting (SLM) process using the different laser scan speeds. The characteristics of two kinds of SKD61 tool-steel powders used in the SLM process are evaluated. Commercial SKD61 tool-steel power has a flowability of 16.68 sec/50 g and its Hausner ratio is calculated to be 1.25 by apparent and tapped density. Also, the fabricated SKD61 tool steel powder fabricated by a gas atomization process has a flowability of 21.3 sec/50 g and its Hausner ratio is calculated to be 1.18. Therefore, we confirmed that the two powders used in this study have excellent flowability. Samples are fabricated to measure mechanical properties. The highest densities of the SKD61 tool-steel samples, fabricated under the same conditions, are $7.734g/cm^3$ (using commercial SKD61 powder) and $7.652g/cm^3$ (using fabricated SKD61 powder), measured with Archimedes method. Hardness is measured by Rockwell hardness testing equipment 5 times and the highest hardnesses of the samples are 54.56 HRC (commercial powder) and 52.62 HRC (fabricated powder). Also, the measured tensile strengths are approximately 1,721 MPa (commercial SKD61 powder) and 1,552 MPa (fabricated SKD61 powder), respectively.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.1
• /
• pp.35-41
• /
• 2017

$TiO_2$, $Al_2O_3$, and $TiO_2-Al_2O_3$ nanolaminated films were grown by atomic layer deposition (ALD) on the 316L stainless steel (SS316L) substrates at a temperature of $150^{\circ}C$. The growth kinetics of $ALD-TiO_2$ and $Al_2O_3$ thin films were systematically investigated in order to precisely control the thickness of each layers in the $TiO_2-Al_2O_3$ nanolaminated films using a high-resolution transmission electron microscopy. And, the exact deposition rates of $ALD-TiO_2$ on $Al_2O_3$ surface and $ALD-Al_2O_3$ on $TiO_2$ surface were revealed to be 0.0284 nm/cycle and 0.11 nm/cycle, respectively. At given growth conditions, the microstructures of $TiO_2$, $Al_2O_3$ and $TiO_2-Al_2O_3$ nanolaminated films were amorphous. The potentiodynamic polarization test revealed that the $TiO_2-Al_2O_3$ nanolaminated film coated SS316L had a best corrosion resistance, although all ALDcoated SS316L exhibited a clear improvement of the corrosion resistance compared with a bare SS316L.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.1
• /
• pp.24-37
• /
• 2001

Physical and chemical properties of the northest Equatorial Pacific between 5° and 12° N along 131.5 °W wore investigated in association with changes in water column structures during the summer seasons of 1998 and 1999. Climatic disturbances such as El Nino and La Nina, should have affected this area during the study Period. In 1998, a thermocline where temperature rapidly decrease with depth, was formed at 90～110 m water depth. Nutrient depicting areas, specially for nitrate+nitrite and phosphate, or oligotrophic regions were extended down to approximately 100 m depth, which coincided with the surface mixed layer depth. However, in 1999, a very fluctuating thermocline was observed with latitudes. As a result of changes in the water column structures, nutrient concentrations also showed fluctuation parallel to the changes in other physical parameters. In the photic zone, depth integrated nitrogen and phosphorus values were 34 gN/m², 7 gP/m² in 1998 and 130 gN/m², 18 gP/m² in 1999, respectively. The results indicated that nitrogen (96 gN/m²) and phosphorus (11 gP/m²) are supported by up-welling and down-welling phenomena with convergence and divergence in the study area.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.191-197
• /
• 2020

As an effective means of price discrimination, some suppliers offer trade credit to the distributors for the purpose of increasing the demand of the product they produce. The availability of the delay in payments from the supplier enables discount of the distributor's selling price from a wider range of the price option in anticipation of increased customer's demand. In this regard, we consider the problem of determining the distributor's optimal price and lot size simultaneously when the supplier permits delay in payments for an order of a product whose demand rate is represented by a constant price elasticity function. It is assumed that the distributor pays the shipping cost for the order and hence, the distributor's ordering cost consists of a fixed ordering cost and the shipping cost that depend on the order quantity. For the analysis, it is also assumed that inventory is depleted not only by customer's demand but also by decay. We are able to develop a solution algorithm from the properties of the mathematical model. A numerical example is presented to illustrate the algorithm developed.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.543-551
• /
• 2020

Red rose petals are usually disposed but they are an abundant source of phenolics and traditionally used as food supplement and as herbal medicine. Of the Various phenolics, they are known to have anticancer, antioxidant, and anti-inflammatory properties. In this study, we investigated the anti-inflammatory effects of red rose ethanolic extracts(GRP) on lipopolysaccharide (LPS)-activated RAW 264.7 cells. The results demonstrated that pretreatment of GRP(500㎍/mL) significantly reduced NO production by suppressing iNOS protein expression in LPS-stimulated cells. Anti-inflammatory effects byred rose petal were observed in the following. Red rose petal inhibited the translocation of NF-κB from the cytosol to the nucleus via the suppression of IκB-α phosphorylation and also inhibited LPS-stimulated NF-κB transcriptional activity. These findings suggest that red rose petal exert anti-inflammatory actions and help to elucidate the mechanisms underlying the potential therapeutic values of red rose petal. Therefore, red rose petal could be regarded as a potential source of natural anti-inflammatory agents.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.33-38
• /
• 2020

In the photoelectrochemical (PEC) water splitting, GaN is one of the most promising photoanode materials due to high stability in electrolytes and adjustable energy band position. However, the application of GaN is limited because of low efficiency. To improve solar to hydrogen conversion efficiency, we introduce a Cobalt Phosphate (Co-pi) catalyst by photo-electrodeposition. The Co-pi deposition GaN were characterized by SEM, EDS, and XPS, respectively, which illustrated that Co-pi was successfully decorated on the surface of GaN. PEC measurement showed that photocurrent density of GaN was 0.5 mA/㎠ and that of Co-pi deposited GaN was 0.75 mA/㎠. Impedance and Mott-Schottky measurements were performed, and as a result of the measurement, polarization resistance (R_p) and increased donor concentration (N_D) values decreased from 50.35 Ω to 34.16 Ω were confirmed. As a result of analyzing the surface components before and after the water decomposition, it was confirmed that the Co-pi catalyst is stable because Co-pi remains even after the water decomposition. Through this, it was confirmed that Co-pi is effective as a catalyst for improving GaN efficiency, and when applied as a catalyst to other photoelectrodes, it is considered that the efficiency of the PEC system can be improved.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.213-220
• /
• 2014

The purpose of this present study is to empirically analyze the variables affecting socio-economic performance of social enterprises. For this purpose of 107 enterprises, located in Seoul, was performed under the hypothesis that the authentication properties (authentication type, authentication year) of social enterprises will affect the socio-economic performance. The analysis showed that first; authentication type among the characteristics of social enterprises showed significant effects on the social performance. Second, authentication year among the characteristics of social enterprises showed significant effects on the economic performances. In addition, since the job-creating type showed higher social performance, it would be desirable to raise the certification rate of this type in the future. The analysis implied that longer the years of accreditation, the greater positive effects on the socio-economic performance of social enterprises was shown. Therefore, the present study suggest the need to diversify support policies according to the number of authentication years in order to secure sustainability by maximizing the socio-economic performance of social enterprise because the monolithic support is not very effective for continued growth and self-reliance of social enterprises.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.171-188
• /
• 2013

Landuse changes and cadastral information error categories in the four major river areas were analyzed for the use of policy data as cadastral re-arrangement of national and public lands would be required, using high-resolution air-photographs and cadastral maps before and after the river development. The study sites were the river areas of 40km around four dams of the Nakdong river where their landuses were changed most. As the results, national and public lands reached 79.9% of land parcels and 93.3% of land areas of the study sites similar with those of the four river areas, 84.3% of land parcels and 85.5% of land areas. The landuse classification of the study sites before the four river development was consisted most of 'river'(71.6%) and 'rice field'(12.3%), but after the development the 'river' was reduced to 42.7% and 'park area'(19.6%) including sport fields and 'mixed lots'(20.8%) were increased. Also, 86.7% of land parcels before the development could be reduced after the development if administrative districts and land ownerships were not considered. Cadastral information error categories can be found as cadastral polygon missing, polygon overlap, location and boundary non-coincidence, small polygon generation, and non-coincidence between cadastral boundary and river boundary. Landuse change monitoring method using air-photographs will be useful to analyze landuse state through fast information aquisition and to manage properties of national and public lands such as river areas.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.348-354
• /
• 2015

Urethane waterproofing materials which currently being used most commonly in the Korean domestic market have high applicability and construct layers without forming any joints, but under the influence of low temperature and low humidity, as well as the thickness of the applied layer, the curing time of this material may become extended in construction sites. To resolve these issues, a proposed method of using water-hardening type of polyurethane waterproofing materials are being developed. However, there currently lacks any standards or evaluation methods on determining an optimal mixture ratio of water for the water-hardening polyurethane waterproofing materials. Therefore, workers and construction workers are relying on their hands-on-skills and experience to determine this ratio and are not able to obtain a consistent performance quality out of these materials. Therefore, for the establishment of a board applicability of the water-hardening polyurethane waterproofing methods in construction sites, this study objectively analyzes the changes in the performance of these materials depending on the changes of the water mixture ratio and attempts to procure the optimal ratio on the basis of forming a provisionary standard. The study prepares mixtures of varying ratio(no water added, 5, 10, 15, 20, 25, 30, 40 and 50) and conducts comparative analysis respective mixtures' performances and their changes in the physical properties in an objective manner and proposes a provisional optimal value that can serve as a data base that can be used as a reference for future studies.