• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.331-335
• /
• 2023

As the viscosity of the blood increases, the blood becomes more sticky and difficult to flow, so the possibility of thrombosis increases and the probability of ischemic cerebral infarction increases. The importance of measuring blood viscosity has recently been emphasized for the prevention of circulatory system diseases, and the need for a viscometer capable of easily and accurately measuring blood viscosity has emerged. In this study, the measured values of a viscosity standard solution and an artificial blood by a parallel-plate viscometer ARS-Medi were compared with the those by Ares-G2 of TA instrument, which is internationally recognized for its accuracy and reliability. The viscosity of N44 standard solution, which is a Newtonian solution, was almost perfectly matched between the two instruments at all shear rates. In the case of an artificial blood, which is a non-Newtonian solution, the measured values between the two instruments showed a difference of about 10% at the lowest shear rate 1 rad/s; however, at a clinically significant shear rate of 10 rad/s or higher, the measured values between them were consistent within the error range. We expect that ARS-Medi, a newly developed parallel-plate viscometer for blood, using disposable plates, will be very useful in clinical practice as it improves the convenience and hygiene of blood viscosity measurement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.291-298
• /
• 2016

In this paper, we studied about the radiated emission of EFT(Electrical Fast Transient)/Burst signal, referenced IEC-61000-4-4 of the international EMC standard and its effect on EUT(Equipment Under the Test) when EFT/Burst signal (Conducted noise) induced on a power cable to EUT. Firstly, we set up test sample by the standard and +4 kV standard signal is induced by EFT/Burst signal generator with 1 m length power cable for 1 minute. Consequently, we found not only induced EFT/Burst signal along power line, but also directly radiated emission signal from EFT/Burst signal generator (Radiated emission noise of EFT/Burst). The radiated emission signal of EFT/Burst was 30 dB which is higher than limit of CISPR 22 which is international EMC standard. Moreover, we measured the electric field strength by changing distance from maximum radiated emission point to electric field strength tester. As a result, this electric field strength was 23 V/m which is higher than international EMC standard test level(CISPR 24). Therefore, it was confirmed that the probability of malfunction may be high when radiated emission of EFT/Burst noise exists near the EUT.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.293-300
• /
• 2020

This study aims to investigate the awareness and policy demands of after school care classes of mothers with elementary school children. The participants of study were 25 mothers with elementary school children in Seoul, Gyeonggi, Incheon, Gangwon. Data collection was conducted from June 23, 2017 to July 18, 2017 by focus group interview. Through the data analysis, the results of the study were analyzed as 'the reality of the after school care class that the mother sees' and 'the policy demands of the mother's after school care class'. 'The reality of the after school care class that the mother sees' is 'the overall level of after school care class is low', 'the probability of selecting the same as a lottery', 'the quality of education that varies depending on the level of the teacher', 'for the child attending the care class negative awareness'. 'Mother's policy demands for after school care classes' are presented as 'positioning as a substitute for thinking and caring', 'improvement of separation between parents' expectations', 'expansion of care recipients', 'request for resilient management'. As the conclusion of this study, first, after school care classes need to focus on the care function. Second, it is necessary to operate after school care classes by level. Third, the realistic needs of mothers should be reflected so that after school care classes can be positioned as alternatives to private education.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2023

Study surveyed perception of dental hygienist occupation was surveyed by examining the qualifications, occupational evaluation Criteria, professional intuition of some college students for the dental hygienist occupation analyzed by the SPSS WIN18.0 program. Among the necessary qualities of dental hygienist, 'professional knowledge of dental hygiene', 'dental hygiene skills' were the highest. Average of Job evaluation Criteria was 4.06, which was higher than the average of 3.80 Job evaluation factors of dental hygienists. As for the Job evaluation criteria, 'stable job', 'job with good work atmosphere and interpersonal relationship' was the highest, 'job with contact with people', 'independent job' was the most. Job evaluation Criteria for dental hygienists, 'jobs with contact with people', 'jobs that can help others' were high, and 'high wages', 'high probability of promotion' were low. As a result of regression analysis of general characteristics and dental hygiene professionalism, it was analyzed that the professionalism of dental hygienists increased when the major was non-health. Overall, In order to improve the qualifications of dental hygienists and raise awareness of vocational evaluation, efforts should be made systematically to identify the strengths and weaknesses of vocational evaluation and dental hygienists and to seek improvements.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.27-45
• /
• 2023

The importance of information security has grown alongside the development of information and communication technology. However, companies struggle to select suitable countermeasures within their limited budgets. Sönmez and Kılıç (2021) proposed a model using AHP and mixed integer programming to determine the optimal investment combination for mitigating information security breaches. However, their model had limitations: 1) a lack of objective measurement for countermeasure efficacy against security threats, 2) unrealistic scenarios where risk reduction surpassed pre-investment levels, and 3) cost duplication when using a single countermeasure for multiple threats. This paper enhances the model by objectively quantifying countermeasure efficacy using the beta probability distribution. It also resolves unrealistic scenarios and the issue of duplicating investments for a single countermeasure. An empirical analysis was conducted on domestic SMEs to determine investment budgets and risk levels. The improved model outperformed Sönmez and Kılıç's (2021) optimization model. By employing the proposed effectiveness measurement approach, difficulty to evaluate countermeasures can be quantified. Utilizing the improved optimization model allows for deriving an optimal investment portfolio for each countermeasure within a fixed budget, considering information security costs, quantities, and effectiveness. This aids in securing the information security budget and effectively addressing information security threats.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.457-491
• /
• 2008

As stage equipment export markets along with special lighting service lack the attraction for already globally established businesses, such markets can be viewed as an advantageous opportunity for SMEs as in general. In reality, global businesses tend to focus on large construction projects and this indicates relatively less substantial markets such as stage equipment and special lighting service export are more suitable for SME businesses. However, possible problems may be recognized as following; doubtful capabilities by such businesses to join in the vast and competitive global market and pursue manufacturing and service based export. This point is also supported by the fact that such in general SME businesses have substantially less experience in exporting products and services abroad. Realizing the distinctive features of the Korean economy, it is unarguable that every sector and area of global market must be regarded and monitored closely. Hence, it can be argued that there is an imminent need for establishment of supportive institution to assist export process of combination of stage equipments and special lighting service. This study emphasizes the need to improve export process of stage equipments, special lighting services as well as other related products and services which have been focused in domestic market only until now. Further, it also analyzed the potential prospect of such direction reconciling current crisis our manufacturing industry is facing. Even though it maybe regarded as one of the niche market for export of Korea in the short term view, stage equipment and special lighting service industry may rapidly grow as the global cultural industries have grown along with the increase of national income earnings overall. Due to such advantageous features, it can be expected that such industries will show strong growth in the near future. After analyzing the fact that Korea's plants (eg. powerplants) export sector is at its boom, there is a need to transform stage equipment and special lighting service export market into a primary market from a secondary(niche) market for SMEs. This study is viewed from the Korean economic and export sector aspect in the aim of seeking a solution to conquest our realistic limit in our export sector by developing a suitable export model. There have been cases of very few attempts to expand abroad by SMEs who have failed miserably due to their failure to adapt to foreign culture, practice and languages as well as substantial lack in experience in export marketing. Despite this, neglecting our manufacturing industry as it is which is showing its limit and problems is out of option therefore, it is imminent that we come up with an effective measure to address this problem and service export can be suggested as one of them. This study reveals manufacturing-service export model of stage equipment and special lighting service and its related areas is recognized as a field with a very strong future and furthermore, it is expected to bring synergy effects in manufacturing and services sector as well. Further, the operation strategy contains combination, composition and fusion(convergence) of manufacturing and service sectors which could derive various of export products which displays greater success probability or this export model. The outcome of this research is expected to become a useful source for enterprises related to such industry which are seeking a possible global expansion. Furthermore, it is also expected to become a catalyst which fastens the process of global expansion and not only that, we are firmly assured that this study will become an opportunity to improve our current policies and institutions related to this area's export market.