• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.41-48
• /
• 2020

This study performed a single hole operation method using a balancing well-cross-mixed underground heat exchanger, and conducted thermal performance studies of an SCW-type underground heat exchanger using a two-well. The study attempted to change the existing operating method of the two adjacent SCW underground heat exchangers with one ball each. The SCW-type geothermal heat exchanger is considered to enable up to 20% of bleed discharge at maximum load, which makes groundwater usage unequal. The efficiency factor of the geothermal system was improved by constructing the discharged water by cross-mixing two balancing wells to prevent the discharge of groundwater sources and keep the temperature of the underground heat exchanger constant. As a result of the cooling and heating operation with the existing SCW heat exchange system and the balancing well-cross-mixed heat exchange system, the measured performance coefficient improved by 23% and 12% in cooling and heating operations, respectively. In addition, when operating with a balanced cross-mixing heat exchange system, it has been confirmed that the initial basement temperature is constant with a standard deviation of 0.08 to 0.12℃.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.625-636
• /
• 2020

Background and objects: Soil contamination caused by CaCl₂ that is used to deice slippery roads in winter is now recognized as one of the major causes of damage of roadside plants. The aim of this study is to identify the salt mitigation effects of planting Chrysanthemum zawadskii and using a soil conditioner. Methods: The study was conducted at the site where Pinus densiflora f. multicaulis was planted on the roadside between Konkuk University Sageori and Danwol Samgeori located in Chungju-si. We classified the soils collected from the field experimental site according to the degree of the damage caused by deicing agents and divided the site into six blocks of three 80 × 80 cm plots replicated by treatment type. Three selected plots were treated with loess-balls on the soil surface (high salinity with loess-balls, medium salinity with loess-balls, low salinity with loess-balls) and three were left as an untreated control (H = high salinity, M = medium salinity, L = low salinity). The soil properties were measured including pH, EC and exchangeable cations as well as the growth of Chrysanthemum zawadskiia. Results: In the results of soil analysis, pH before planting Chrysanthemum zawadskiia was 6.39-6.74 and in September, five months after planting, the acidity was reduced to 5.43-5.89. Electrical conductivity (EC) was measured to be H > M > L with the higher degree of damage by deicing agents. The analysis of deicing exchangeable cations showed that the content of Ca²⁺ of soils were significantly correlated to deicing exchangeable cations (Ca²⁺, Na⁺, Mg²⁺) in the shoot part of Chrysanthemum zawadskii. The loess-ball treatment showed a lower content of deicing exchangeable cations than the treatment where Chrysanthemum zawadskiia was planted. Conclusion: In this study, the use of a new system made of loess-balls is proposed as a soil conditioner to protect soils from the adverse effects of road deicing salts. These data suggest that treatment of soil conditioners and planting Chrysanthemum zawadskiia are effective in mitigation of salt stress on the soils damaged by deicing agents.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.15-20
• /
• 2017

Recently, with the development of the IT industry, interest in computer convergence technology is increasing in various fields. Especially, in the semiconductor field, a vision system that uses a camera and computer convergence is often used to inspect semiconductor device defects in the production process. Various systems have been studied to remove noise, which is a major cause of degradation in processing of data related to these image processing systems. In this paper, we try to detect defects in BGA (Ball Grid Array) package devices by recognizing defects in advance during mass production. We propose a measurement system using a Gaussian filter, a Median filter, and an Average filter, which are widely used for noise reduction of image data Applying the proposed system to the manufacturing process of the BGA package can be used to judge whether the defect is good or not, and it is expected that productivity will be improved.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.91-96
• /
• 2021

The enhancement of thermoelectric figure of merit was achieved by the simple processes of sieving and high energy ball milling, respectively, which are enable to reduce the grain size of n-type Bi₂Te₃ thermoelectric materials. By optimizing the grain size, the electrical conductivities and thermal conductivities were controlled. In this study, spark plasma sintering was employed for hindering the grain growth during the sintering process. The thermoelectric figure of merit was measured to be 0.78 in the samples with 30 min high energy ball milling process. Notably, this value was 40 % higher than that of pristine Bi₂Te₃ sample. This result shows the properties of thermoelectric materials can be readily controlled by optimization of grain size via simple ball milling process.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2017

Fe-9.8Si-6.0Al mother alloy was manufactured using by Fe-3.5Si recycled scrap and Si powder. And then, soft magnetic alloy powder of $D_{50}$ size and sphere type were prepared by gas atomization process. To obtain the soft magnetic powder of a high aspect ratio, in the first, we conducted the ball milling process for 8 hours. And heat treatment was performed under $650^{\circ}C$, 2 hours and $N_2$ atmosphere condition for reducing the residual stress of the powder. Based on these process, we made around $50{\mu}m$ diameter Fe-9.8Si-6.0Al powder, which morphology and shape was a similar to the commercial Fe-Si-Al powder. Finally, the soft magnetic sheets were prepared by tape casting process using by those powders. The permeability of the tape casting sheet was measured, and we confirmed the possibility of reusing to the soft magnetic materials of Fe-Si electric sheet scrap.

• Journal of Industrial Convergence
• /
• v.19 no.6
• /
• pp.81-91
• /
• 2021

This study was conducted to investigate the effect of ankle muscle strengthening exercise using BOSU ball and taping on static and dynamic plantar pressure in patients with hallux valgus. Subjects were 26 men and women in their twenties with hallux valgus, and they were randomly assigned to a taping group (TG; n=13) and an ankle strengthening group (ASG; n=13). Each group received the appropriate intervention over a total of 4 weeks, and static and dynamic plantar pressure were measured before and after the intervention. Independent T-test was performed to examine the difference in the amount of change between groups, and paired-sample T-test was performed to determine whether the difference between the pre-post values within the group was significant. The statistical significance level was set as α=.05. As for the ratio of the total body weight of the foot (Foot), the amount of change in the ASG of the left foot was significantly decreased compared to the TG within the group (p<.05). Significantly increased (p<.05). As for the degree of pronation of the foot (MP/change ratio), the amount of change in the TG of the right foot was significantly decreased compared to the ASG (p<.05), and in the force of the foot, the TG of the left foot was the amount of change within the group compared to the ASG. was significantly increased (p<.05), and in the group-to-group change, the amount of change in TG was significantly different than that of ASG (p<.05). Therefore, it can be considered that ankle strengthening exercise using bosu ball and taping are insufficient to give effective change to patients with hallux valgus.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.3
• /
• pp.217-223
• /
• 2020

Objective: The purpose of this study was to analyze the effect of postural sway on the kinematic variables of the putter head during golf putting and to provide information to the importance of postural sway control in the putting stroke for novice golfers. Method: The center of pressure (CoP) and Kinematics variables of the putter head were calculated during 2 m flat golf putting using 8 motion capture cameras (250 Hz) and 2 force plate (1,000 Hz). SPSS 24.0 was used to perform Pearson's correlation coefficient and simple regression analysis, and the statistically significance level was set to .05. Results: As a result of analyzing the correlation between CoP variables and the putter head rotation angle, the CoP moving length, CoP moving range (ML direction), and CoP moving velocity (ML direction) showed a positive correlation with the putter head rotation angle (yaw axis) and were statistically significant. Conclusion: Therefore, In order to perform the accurate putting stroke maintaining the ball's directionality, it is determined that it is important to control posture sway in the ML directions by minimizing the movement and velocity of the CoP.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.149-156
• /
• 2017

Graphene nanoplatelet (GNP)-reinforced alumina ($Al_2O_3$) is a promising material for micro-partapplications, particularly micro-nozzle shapes, because of its excellent wearresistance. In this study, a $Al_2O_3$/GNPcomposite with 15 vol% graphene nanoplatelets (GNP) was highly densified and fabricated via spark plasma sintering for micro-electrical discharge drilling (Micro-ED drilling) and the wear resistance property of the composite is evaluated via the ball-on-disk method. In addition, the diameter and shape of the micro-electrodes machined by wire electrical discharge grinding (WEDG), block electrical discharge grinding (BEDG), and new linear block moving electrical discharge grinding (LBMEDG) methods are systematically compared and analyzed to observe the micro-hole machining in the micro-ED drilling of the $Al_2O_3$/15vol% GNP composite.

• ETRI Journal
• /
• v.32 no.3
• /
• pp.414-421
• /
• 2010

The interconnection mechanisms of a smart anisotropic conductive adhesive (ACA) during processing have been characterized. For an understanding of chemorheological mechanisms between the fluxing polymer and solder powder, a thermal analysis as well as solder wetting and coalescence experiments were conducted. The compatibility between the viscosity of the fluxing polymer and melting temperature of solder was characterized to optimize the processing cycle. A fluxing agent was also used to remove the oxide layer performed on the surface of the solder. Based on these chemorheological phenomena of the fluxing polymer and solder, an optimum polymer system and its processing cycle were designed for high performance and reliability in an electrical interconnection system. In the present research, a bonding mechanism of the smart ACA with a polymer spacer ball to control the gap between both substrates is newly proposed and investigated. The solder powder was used as a conductive material instead of polymer-based spherical conductive particles in a conventional anisotropic conductive film.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2718-2731
• /
• 2021

In the structural health monitoring of composite materials, in order to solve the ill-posed problem of impact force reconstruction, regularization techniques are often used to deal with it. Due to the poor convergence of the traditional Tikhonov regularization method, in order to accurately reconstruct the time history of the impact force, this paper improves Tikhonov regularization method and constructs homotopy function with strong convergence. Since the optimal regularization parameters need to be found in the homotopy function, the Newton downhill method is used to find the optimal parameters and the homotopy function can be calculated, which can accurately reconstruct the time history of the impact force. In order to verify the universality of the method in this paper, impact hammers of different materials were used in the experiment in this paper to study and compare the reconstruction effect of impact time history of different impact hammers.