• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.158-158
• /
• 2008

In general, a wireless communication device has employed a whip antenna or a stubby antenna. Recently, wireless communication device is increasingly employing an embedded antenna, Intenna, for the sake of miniaturization. Further, it may employ both external and embedded antennas. Examples of the embedded antenna include a multi-band monopole antenna, which radiates uniformly in all directions when viewed from above, and a planar inverted F antenna (PIFA), which is a variation of the monopole antenna. However, since the conventional antenna is mounted in a finished state on the mobile communication terminal, there is a limitation of space required for providing the antenna. According to the present study, there is provided an Intenna that is deposited on a front or back case of the mobile communication terminal by a sputtering method. Accordingly, it is possible to overcome a limitation of space required for providing the Intenna and to improve the performance of the Intenna formed on the front or back case of the mobile communication terminal.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.262-267
• /
• 2008

Numerical investigations were performed with an external-compression inlet with a three-dimensional bump at Mach 2 to scrutinize the geometrical effects of the bump in controlling the interaction of a shock wave with a boundary layer. The inlet was designed for two oblique shock waves and a terminal normal shock wave followed by a subsonic diffuser, with a circular cross-section throughout. The bump-type inlet that replaced the aft ramp of the conventional ramp-type inlet was optimized with respect to the inlet performance parameters as well as compared with the conventional ramp-type inlet. The current numerical simulations showed that a bump-type inlet can provide an improvement in the total pressure recovery downstream of the shock wave/boundary layer interaction over a conventional ramp-type inlet.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.262-267
• /
• 2008

Numerical investigations were performed with an external-compression inlet with a three-dimensional bump at Mach 2 to scrutinize the geometrical effects of the bump in controlling the interaction of a shock wave with a boundary layer. The inlet was designed for two oblique shock waves and a terminal normal shock wave followed by a subsonic diffuser, with a circular cross-section throughout. The bump-type inlet that replaced the aft ramp of the conventional ramp-type inlet was optimized with respect to the inlet performance parameters as well as compared with the conventional ramp-type inlet. The current numerical simulations showed that a bump-type inlet can provide an improvement in the total pressure recovery downstream of the shock wave/boundary layer interaction over a conventional ramp-type inlet.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.25-32
• /
• 2004

Purpose : The simulator is used to determine patient field and ensure the treatment field, which encompasses the required anatomy during patient normal movement such as during breathing. The latest simulator provide real time display of still, flouroscopic and digitalized image, but conventional simulator is not yet. The purpose of this study is to introduce digital image capture system(DICS) using conventional simulator and clinical case using digital captured still and flouroscopic image. Methods and materials : We connect the video signal cable to the video terminal in the back up of simulator monitor, and connect the video jack to the A/D converter. After connection between the converter jack and computer, We can acquire still image and record flouroscopic image with operating image capture program. The data created with this system can be used in patient treatment, and modified for verification by using image processing software. (j.e. photoshop, paintshop) Result : DICS was able to establish easy and economical procedure. DCIS image was helpful for simulation. DICS imaging was powerful tool in the evaluation of the department specific patient positioning. Conclusion : Because the commercialized simulator based of digital capture is very expensive, it is not easily to establish DICS simulator in the most hospital. DICS using conventional simulator enable to utilize the practical use of image equal to high cost digitalized simulator and to research many clinical cases in case of using other software program.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.253-261
• /
• 2007

This study aims at newly constructing and evaluating performance of the stevedoring equipment systems in terminals. The stevedoring equipments used in conventional terminals are insufficient in flexibility in their functions or design structure, and most of the stevedoring systems based on such equipments have conventional design, therefore, limited in improving the productivity of terminals both in performance and functionality. The stevedoring equipment systems in terminals, in general, can be subdivided into 4 subsystems of quay, transportation, yard, and gate system, which carry out loading and unloading works with proper facilities and equipments. In this study, a design of next generation stevedoring equipment system comprised of various stevedoring equipments which have superior performance and functionalities to the conventional equipments was proposed, and its performance was evaluated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.1
• /
• pp.1-9
• /
• 2007

In this paper, a third-order harmonic mixer is designed using frequency multiplier theory for the Ka-band. The gate bias voltage is selected by frequency multiplier theory to maximize the third-order harmonic element ofthe fundamental LO frequency in the proposed mixer. The designed mixer has a gate mixer structure composed of a gate terminal input for the fundamental local signal ($f_{LO}$), RF signal (${RF}$) and a drain terminal output for the harmonic frequency ($3f_{LO}-f_{RF}$) respectively. The Ka-band harmonic mixer is designed and fabricated using a commercial GaAs MESFET device with a plastic package. The proposed mixer will provide a solution for the problems found in the high cost, complex circuitry in a conventional Ka-band mixer. The 33.5 GHz harmonic mixer has a -10 dB conversion gain by pumping 11.5 GHz LO with a +5 dBm level.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2249-2255
• /
• 2015

The use of voltage source converter multi-terminal direct current (VSC-MTDC) systems is anticipated to increase from the introduction of wind farms and super grids in the near future. Effective control of the DC voltage in VSC-MTDC systems is an important research topic. This paper proposes a new dynamic reference-based voltage droop control to control the DC voltage in VSC-MTDC systems more effectively. The main merit of the dynamic reference-based voltage droop control is that it can reduce the steady-state error in conventional voltage droop control by changing references according to the system operating conditions. The performance of the proposed control was tested in a hardware-in-the-loop simulation (HILS) system based on the OPAL-RT real-time digital simulator and four digital signal processing boards.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.65-70
• /
• 1999

In this paper, the cost-effective design of output reactor which is used to suppress the over-voltage at the motor terminal in the Adjustable Speed Drives(ASD) application is proposed. In the elevator drive system, the power cable length is relatively shorter than other ASD applications and then the over-voltage at the motor terminal depends on the frequency characteristics of the output reactor at the over-voltage operating frequency. The over-voltage suppression mechanism of output reactor in ASD application is analyzed and the dominant parameters of output reactor for the over-voltage suppression are extracted. Using these parameters as the design values and considering the high frequency characteristics of iron core in the reactor, a new cost-effective structure of output reactor is proposed. Experimental results of the conventional reactor and the proposed reactor with a 15kW induction motor are given to verify the proposed scheme.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.538-542
• /
• 2013

This paper proposes a broadcast software download (BSD) scheme for a 10-gigabit-capable passive optical network (XG-PON), which dramatically reduces the time required to update a remotely-located user terminal's software. The performance of the proposed BSD is examined by numerical analysis and demonstrated by experimental verification on our XG-PON test platforms. The results show that the BSD takes less than 5 minutes to update 45 user-terminal software, while the conventional unicast software download scheme normally takes more than one and half hours.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.881-885
• /
• 2018

In order to develop a gas circuit breaker (GCB), the breaking performance of the short line fault (SLF) should be prioritized over that of the breaker terminal fault (BTF). In brief, it is necessary to evaluate the thermal characteristics of the insulating gas that is filled in a GCB. In the process of developing a GCB, many companies use the simplified synthetic testing facility (SSTF).In order to evaluate the SLF breaking performance of a GCB with a long minimum arcing time, a modifications to the conventional SSTF was proposed. In this study, we developed the SSTF with a modified transient recovery voltage circuit. The performance of the newly developed SSTF was verified by an $L_{90}$ breaking performance test on a rating combination of 170 kV, 50 kA, and 60 Hz.