플라즈마 아크 광원을 사용하는 광중합기를 저출력 할로겐 광원을 사용하는 전통적인 광중합기와 비교 평가하기 위하여, 세 종류의 복합레진을 두께가 2, 3, 4, 5mm인 몰드에 충전하고 레진 상면을 할로겐광으로 40초간, 플라즈마광으로 3, 6, 9초간 조사한 후 레진 상면과 하면의 표면미세경도를 각각 측정하였다. 레진시편 상면의 표면경도와 하면의 표면경도 간의 차이는, 두께 2mm 시편에 할로겐광을 40초간 조사하였거나 플라즈마광을 9초간 조사한 경우들을 제외하고, 모두 유의하였다(P<0.05). 레진시편 상면의 표면경도는 전체 실험군들에서 서로 유의한 차이가 없었다. 레진시편 하면의 표면경도는 전체적으로 보아 할로겐광을 40초간 조사한 군들에서 가장 높았고 플라즈마광의 조사시간이 감소함에 따라 감소하였으며 레진시편의 두께가 증가함에 따라 감소하였다. 이상의 결과는 복합레진의 중합깊이 측면에서 볼 때 3, 6, 9초간 조사하는 고출력 플라즈마광의 중합능력이 40초간 조사하는 저출력 할로겐광의 중합능력에 미치지 못함을 시사한다.
We developed a new photoresist which was composed of polyaniline, uv-curing agent, N-methyl-2- pyrrolidine (NMP) and N-Butyl alcohol (BuOH) as solution. The photoresist is characterized by the capability of being developed in water. We successfully patterned pentacene thin film, which was vulnerable to organic solvent and thus could not be patterned by the conventional photolithography process, with the water soluble photoresist and the minimum feature size was found to be 2um.
The details of an approach to account for the factors that have been found to affect the ability and the probability to control cracking due to sawcutting in newly constructed concrete pavements are presented. Several factors such as material strength parameters, method and quality of curing, slab and subbase stiffness, and concrete shrinkage affect the probability of crack initiation. Others are relevant to concrete mixture characteristics that affect development of early aged stresses caused by shrinkage and thermally induced contraction. This paper presents the results of a probabilistic analysis of the factors that affect crack control using sawcut notches. Cost analyses on both conventional and early-entry sawcutting methods are shown to support the results of the probabilistic analysis. From both an operational and cost standpoint, it is evident for the environmental conditions considered that early-entry sawcut methodology holds a significant advantage over conventional methods.
High-performance concrete is defined as concrete that meets special combinations of performance and uniformity requirements that cannot always be achieved routinely using conventional constituents and normal mixing, placing, and curing practices. Ever since the term high-performance concrete was introduced into the industry, it had widely used in large-scale concrete construction that demands high-strength, high-flowability, and high-durability. To obtain such performances that cannot be obtained from conventional concrete and by the current method, a large number of trial mixes are required to select the desired combination of materials that meets special performance. In this paper, therefore, using genetic algorithm which is a global optimization technique modeled on biological evolutionary process-natural selection and natural genetics-and can be used to find a near optimal solution to a problem that may have many solutions, the new design method for high-performance concrete mixtures is suggested to reduce the number of trial mixtures with desired properties in the field test. Experimental and analytic investigations were carried out to develop the design method for high-performance concrete mixtures and to verify the proposed mix design.
Karra, Ram Chandar;Raghunandan, Mavinakere Eshwaraiah;Manjunath, B.
Advances in concrete construction
/
제4권3호
/
pp.221-230
/
2016
This paper presents a preliminary study on the influence of laterite soil replacing conventional fine aggregates on the strength properties of GGBS-blended-concrete. For this purpose, GGBS-blended-concrete samples with 40% GGBS, 60% Portland cement (PC), and locally available laterite soil was used. Laterite soils at 0, 25, 50 and 75% by weight were used in trails to replace the conventional fine aggregates. A control mix using only PC, river sand, course aggregates and water served as bench mark in comparing the performance of the composite concrete mix. Test blocks including 60 cubes for compression test; 20 cylinders for split tensile test; and 20 beams for flexural strength test were prepared in the laboratory. Results showed decreasing trends in strength parameters with increasing laterite content in GGBS-blended-concrete. 25% and 50% laterite replacement showed convincing strength (with small decrease) after 28 day curing, which is about 87-90% and 72-85% respectively in comparison to that achieved by the control mix.
Crosslink is the most important chemistry in a rubber vulcanizate. Degree and type of crosslinks of the vulcanizate determine its physical properties. Change of crosslink density and deformation of a rubber vulcanizate by thermal aging were studied using natural rubber (NR) vulcanizates with various cure systems (conventional, semi-EV, and EV) and different cure times (under-, optimum-, and overture). All the NR vulcanizates were deformed by the thermal aging at 60-100 $^{\circ}C.$ The higher the aging temperature is, the more degree of the deformation is. The undercured NR vulcanizates after the thermal aging were deformed more than the optimumand overcured ones. The NR vulcanizates with the EV cure system were less deformed than those with the conventional and semi-EV cure systems. The deformation of the NR vulcanizates was found to be due to change of the crosslink density of the vulcanizates. The crosslink densities of all the vulcanizates after the extraction of organic materials were also changed by the thermal ging. The sources to change the crosslink densities of the vulcanizates by the thermal aging were found to be dissociation of the existing sulfur crosslink and the formation of new crosslinks by free sulfur, reaction products of curing agents, and pendent sulfide groups.
본 연구의 목적은 장경간 강바닥판 교량의 교면포장 재료로서 에폭시 아스팔트 혼합물을 평가하고, 현장에 적용하는 것에 있다. 에폭시 아스팔트 혼합물의 국내 적용을 위한 골재입도를 제시하였고, 실내 공용성 실험을 수행한 결과 내구성능 면에서 매우 우수함을 알 수 있었다. 또한, 온도에 따른 회복탄성계수와 전단부착강도 시험결과를 활용하여 구조해석을 실시 후 전단응력 검토결과 전단부착강도의 9%로도 충분한 접착 성능을 확보할 수 있는 것으로 나타났다. 에폭시 아스팔트 교면 포장에 발생하는 인장응력의 경우 중국에 시공되어 검증된 난징대교 실내시험결과와 비교 시 유사하거나 작은 값을 나타내어 충분한 공용 성능을 확보할 수 있는 것으로 나타났다. 결과적으로 에폭시 아스팔트 혼합물은 일반 아스팔트에 비해 매우 우수한 내구성능을 확보할 수 있는 것으로 나타났다. 하지만 현장에서 장경간 강바닥판 교량의 교면포장 재료로서 에폭시 아스팔트 혼합물을 적용할 경우 온도와 양생기간에 따른 강도발현에 차이가 있을 수 있으므로 현장 적용 시, 생산 시료로 제작한 혼합물에 대한 평가가 이루어져야 한다.
건설산업에서는 탄산가스 저감을 위해 산업부산물을 다량 활용하는 기술개발을 위한 연구가 이루어지고 있다. 산업부산물 중 특히 고로슬래그 미분말은 잠재수경성에 기인하여 장기강도는 우수하나 초기강도가 낮기 때문에 많은 양을 대체하는데 한계가 있다. 이에 본 연구에서는 철강공정 중 용선예비처리 공정에서 발생하는 슬래그부산물을 활용하여 고활성 고로슬래그 미분말을 시험 제조후 고활성 고로슬래그 미분말의 모르타르 압축강도 강도발현 특성을 검토하였다. 또한, 고활성 고로슬래그 미분말 단독으로도 경화가 가능한 특징을 고려해서 2차 콘크리트 제품용 결합재로서 활용 가능성을 검토하고자 배합조건에 따른 콘크리트 제조 및 압축강도 발현특성을 검토하였다. 실험변수로써 슬래그부산물의 분말도, 치환율, 양생조건 및 W/B를 설정하였다. 그 결과 슬래그부산물을 자극제로 활용한 고활성 고로슬래그 미분말 모르타르의 압축강도 향상을 확인하였으며 고활성 고로슬래그 미분말이 단독으로도 경화가 가능하기 때문에 양생 및 배합조건을 고려하면 고활성 고로슬래그 미분말을 콘크리트 2차 제품용 결합재로서 활용 가능할 것으로 판단된다.
치과의 수복재로 널리 쓰이는 복합레진의 미세누출에 대한 할로겐광과 플라즈마광의 영향을 비교하고, 유동성 복합레진과 할로겐광으로도 중합시간이 20초로 단축된 복합레진 $Filtek^{TM}$ Z250이 미세누출면에서 기존에 널리 쓰이던 복합레진인 Z100을 대체할 수 있을지를 평가하며, 미세누출에 미치는 adhesive resin의 영향을 알아보고자 본 실험을 수행하였다. 발거된 치아에 5급 와동을 형성하고 레진의 충전은 각 군에 따라 시행하였다. 유동성복합레진 $Filtek^{TM}Flow$와 Z100, $Filtek^{TM}Z250$을 이용하였고, 할로겐광과 플라즈마광을 이용하여 중합하였다 충전이 완료된 시편은 보관, 연마, 열순환을 시행하고, 1% methylene blue를 침투시킨 후 협설로 절단하여 미세누출 정도를 관찰하여 다음과 같은 결론을 얻었다. 1. $Filtek^{TM}Flow$와 $Filtek^{TM}Z250$ 모두 광원에 따른 미세누출의 차이는 없었다(p>0.05). 2. 유동성 복합레진인 $Filtek^{TM}Flow$는 복합레진 $Filtek^{TM}Z250$과 Z100에 비해 통계적으로 유의성있는 큰 미세누출을 보여(p<0.05) 유동성 복합레진만으로 수복한다면 미세누출의 위험이 커질 것이다. 3. Adhesive resin을 도포한 것이 할로겐광을 이용한 경우와 플라즈마광을 이용한 경우 모두에서 통계적으로 유의하게 미세누출을 감소시켰다.(p<0.05)
연구목적: 본 연구는 3종의 이중중합 레진시멘트에서 자가중합법과 이중중합법이 중합도에 미치는 영향을 간접적으로 알아보고자 시간경과에 따라 미세경도를 측정하였다. 연구 재료 및 방법: 실험을 위해 자가접착 레진시멘트인 Maxcem Elite (Kerr)와 Rely-X Unicem (3M ESPE) 및 전통형 레진시멘트인 Rely-X ARC (3M ESPE)를 사용하였으며 각 레진시멘트를 동일한 크기의 테플론 몰드에 채우고 자가중합법과 이중중합법으로 중합을 하여 각각 10개씩 시편을 제작하였으며 중합 시작 후 10분, 30분, 1시간, 3시간, 6시간, 12시간, 24시간이 지난 시점에 미세경도를 측정하였다. 결과: 각 시점에서 레진시멘트별로 중합법 사이의 비교를 위한 independent samples t-test 및 모든 실험군 사이의 비교를 위한 one-way ANOVA와 Scheffe 사후검정을 95% 유의수준에서 실시하여 다음과 같은 결과를 얻었다. 1. 모든 실험군에서 시간이 경과함에 따라 미세경도가 증가하는 경향을 보였다. 2. Maxcem에서 중합 1시간 후 부터를 제외하고 이중중합이 자가중합에 비해 높은 미세경도 값을 보였다(p<0.05). 3. 매 시점에서 자가중합법의 Rely-X Unicem이 가장 낮은 미세경도를 보였으며 이중중합법의 Rely-X Unicem이 가장 높은 미세경도 값을 보였다. 결론: 이상의 실험 결과로 볼 때 이중중합 레진시멘트의 충분한 중합을 위해서는 광조사를 반드시 하여야 할 것으로 생각한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.