• 한국농공학회지
• /
• 제14권2호
• /
• pp.2593-2602
• /
• 1972

Plastic pipes Wrapped with synthetic filter are recently used for drainage or Collecting of Underground water. But it's use is possible only for small size of diameter less than 300mm, because large size plastic pipes are not readily availabe. For large diameter infiltration gallery, porous concrete pipes are now used, but it's heavy weight brings difficulties in making, moving and setting of the pipes. With it's conventional method of filter setting, fine sands are brought into the pipes to make trouble to lifting pumps and channels Therefore, initial construction cost and maintenance cost become high. To solve-this problem, new method is developed and tested. Small PVC pipes(diameter 14mm) are assembled at the site of construction to newly devised I beam type circls. The size of circular inpiltration gallery is optionally determined by I beam type circle which support small PVC pipes and is made of PVC amterial. This gallery are wrappd with syntheitc filter to prevent sand instruction. In this test, the diameter of 300, 400, 500mm were used. I beam type circles were made with PVC plated with thickness. t=6, 9, 12mm. Water quantity collected through the PVC circulor gallery are measured and the strengths of the gallery. 1. Allowable setting depth of gallery pipe below graund for the case of t=6mm, D=500mm is 2.72m. 2. Collected water quantity depends on soil texture, depth of water grandient of water surface, filter material angle of setting etc. 3. About 126% of water quantity collected from the one gallery pipe measured in two gallery pipes of two parallel installation.

• 한국강구조학회 논문집
• /
• 제20권2호
• /
• pp.355-364
• /
• 2008

비좌굴 가새는 좌굴을 방지하고 인장영역과 압축영역에서 안정적인 이력거동을 나타내기 위하여 개발되었다. 본 연구에서는 비좌굴 가새의 구조적 성능을 평가하고자 부재의 강도와 하중재하방법을 변수로 하여 실험을 수행하였다. 모든 실험체는 강종을 다르게 적용한 심재와 보강재로 구성되었다. 실험 결과에 의하면 고강도강을 심재로 적용시 연성도가 저하되어 AISC의 내진기준에서 제시하는 요구성능을 만족하지 못하였다. 그러나 고강도강을 심재로 적용시 일반강을 심재로 적용한 경우에 비해 최대내력은 상승하여 전체 에너지 소산 측면에서는 유사한 성능을 발휘하였다.

• 한국융합학회논문지
• /
• 제6권6호
• /
• pp.163-169
• /
• 2015

본 연구는 기존의 가설 흙막이 벽으로만 사용되는 현장제조 CIP를 기성제 PHC 파일로 대체하여 흙막이 겸 영구벽체로 사용하는 융합 공법을 제안하고 적용가능성을 확인하였다. PHC파일은 공장제작으로 품질을 믿을 수 있으며 재료적으로 콘크리트 강도나 긴장재의 인장응력이 CIP에 비해 우수하고 구조적으로도 큰 휨내력을 가지고 있다. 이러한 장점을 기진 PHC파일을 이용한 영구벽체 공법은 기존의 가설 흙막이 공법과 비교하면 시공이 간편하고 경제적이며 현장타설이 최소화되어 공기단축이 가능하다. 또한 공장제작을 통해 균질한 구조성능을 얻을 수 있고 흙막이와 지하외벽이 이중 시공되지 않으므로 공간활용 측면에서도 유리한 장점이 있는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.9-12
• /
• 2010

Conventional apartment building projects have favored wall slab structure for the ease of construction and economic viability. However, wall slab structure, consisting of bearing walls, makes remodeling a difficult challenge. In addition, as the amendment to the Building Act in November, 2005 incentivized easy-to-remodel Rahmen structure design for apartment building in terms of floor area ratio and the number of stories, were are seeing more use of PC construct method in apartment building projects gradually. However, PC construction method requires complex connections between beams and columns, making it difficult to install and remove formwork. Furthermore, it is not possible to reuse forms after removal, generating lots of construction wastes, and it is necessary to install new forms again when the size of connection changes in line with modification of column cross-section. Researchers in Korea and elsewhere in the world have focused on structural performance of connection in PC construction method, with little attention to alternative approaches to improving connection forms for PC construction method. Accordingly, this research aims to study an approach to improving connection forms for PC construction method.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.234-240
• /
• 2016

Energetically-modified material using reject fly ash (RFA), generated from thermal power plants, was manufactured to investigate the effect of the material on the physical and chemical characteristics of cement mortar. In order to modify reject fly ash, a vibration mill was used. Particle size, grain shape, and crystal structure of the ash were analyzed. Then, the compressive strength of the mortar using energetically-modified reject fly ash (ERFA) was measured. Microstructure and X-ray diffraction (XRD) patterns were also used in the analysis. As the replacement rate of ERFA increased, the value of the compressive strength tended to decrease. However, it was found that the compressive strength values of 7 and 28 days-cured specimens were higher than those of conventional ordinary Portland cement (OPC) mortar with 10 % replacement rate condition.

• Structural Engineering and Mechanics
• /
• 제17권2호
• /
• pp.245-266
• /
• 2004

Incremental launching method is one of the highly competitive techniques for construction of concrete bridges. It avoids costly and time consuming form work and centralizes all construction activities in a small casting yard, thus saving in cost and time against conventional bridge construction. From the quality point of view, it eliminates the uncertainty of monolithic behaviour by allowing high repetitiveness and industrial environment. But, from analysis and design point of view, the most characteristic aspect of incrementally launched bridges is that, it has to absorb the stresses associated with the temporary supports that are gradually taken on by the deck during its launch. So, it is necessary to analyse the structure for each step of launching which is a tedious and time consuming process. Effect of support settlements or temperature variation makes the problem more complex. By using transfer matrix method, this problem can be handled efficiently with minimal computational effort. This paper gives insight into method of analysis, formulation for optimization of the structural system, effect of support settlement and temperature gradient, during construction, on the stress state of incrementally launched bridges.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.922-927
• /
• 2006

There is a concern with worldwide deterioration of highway bridges, particularly reinforced concrete. The advantages of fibre reinforced plastic(FRP) composites over conventional materials motivate their use in highway bridges for replacement of structures. Recently, an FRP deck has been installed on a state highway, located in New York State, as an experimental project. In this paper, a systematic approach for analysis of this FRP deck bridge is presented. Multi-step linear numerical analyses have been performed using the finite element method to study the structural behavior and the possible failure mechanism of the FRP deck-superstructure system Deck's self-weight and ply orientations at the interface between steel girders and FRP deck are considered in this study. From this research, the results of the numerical analyses were corroborated with field test results. Analytical results reveal several potential failure mechanism for the FRP deck and truss bridge system The results presented in this study may be used to propose engineering design guideline for new and replacement FRP bridge deck structure.

• 한국철도학회논문집
• /
• 제13권4호
• /
• pp.425-430
• /
• 2010

이 논문에서는 교량의 급속시공을 위하여 분절하여 기 제작된 합성기둥을 현장에서 연결하여 완성하는 조립식 합성교각의 내진거동을 조사하였다. 이를 위해 서로 다른 연결 상세를 갖는 3개의 조립식 합성교각을 대상으로 정적반복가력실험을 수행하였다. 실험결과, 조립식 합성교각에 소성힌지가 발생하여도 현장연결부는 탄성적으로 거동하였고 연결부의 상대변위도 발생하지 않았다. 또한 조립식 합성교각의 전반적인 내진성능도 일반적인 내진상세를 가진 콘크리트교각에 비해서 우수한 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1864-1874
• /
• 2007

Korean trains pass many mountain areas, so the volume of structures like bridge and tunnel has large part of railway lines. Train speed-up naturally needs a straight line in railway, then structures are increasing, and the length of structure has more than 70% in Kyongbu high-speed railway. The stiffness of bridge and tunnel is higher than the soil in the roadbed in spite of dynamic difference in vibration and displacement. Differences in stiffness have more dynamic effects and increase the deformation and destruction in the track and roadbed. This influences passenger's comfort and the safety of operation, and it needs more track maintenance. This study selected tunnel with ballast track, tunnel with concrete track, and structure's approaches with short maintenance cycle in the roadbed and had track acceleration tests and track liner inspections using track master in the field. This study will measure periodically to structure's approaches which have very fast track irregularity and analyze dynamic differences and track irregularity near structure's approaches, so realize the cause of track irregularity of structure's approaches and use basic data for reasonably strengthening method of structure's approaches.

• Coupled systems mechanics
• /
• 제5권2호
• /
• pp.101-126
• /
• 2016

Seismic structural fragility constitutes an important step for performance based seismic design. Lateral load-resisting structural members are often analyzed under one component base excitation, while the effect of bi-directional shaking is accounted per simplified rules. Fragility curves are constructed herein under real bi-directional excitation by a simple extension of the conventional Incremental Dynamic Analysis (IDA) under uni-directional shaking. Simple SODF systems, parametrically adjusted to different periods, are examined under a set of near-fault and far-fault excitations. Consideration of bi-directional interaction appears important for stiff systems. Further, the study indicates that the peak ground accelertaion, velocity and displacement (PGA, PGV and PGD) of accelerogram are relatively stable and efficient intensity measures for short, medium and long period systems respectively. '30%' combination rule seems to reasonably predict the fragility under bi-directional shaking at least for first mode dominated systems dealt herein up to a limit state of damage control.