• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.410-418
• /
• 2010

Staphylococcus aureus is one of the major pathogens that can cause staphylococcal infection and food poisoning. In this study, we compared conventional culture methods and real-time PCR for detection of S. aureus in artificially inoculated milk, sausage, raw pork, and vegetable salad. The performance of a coagulase test for confirming S. aureus was also compared with a colony PCR test. Bulk food samples (500 g each) were artificially inoculated with S. aureus and divided into 20 samples (25 g or mL each). All samples were added to tryptic soy broth (225 mL/sample) with 10% NaCl and incubated at $37^{\circ}C$ for 24 h. After the enrichment, broth cultures were streaked onto Baird-Parker (BP) agar with egg yolk tellulite, and incubated at $37^{\circ}C$ for 24 h. In addition, 1 mL of broth cultures was collected to perform real-time PCR. Two suspicious colonies from the BP agar were picked up and plated on nutrient agar and incubated at $37^{\circ}C$ for 24 h followed, by a coagulase confirmation test and a colony PCR analysis. There were no statistical differences between culture methods and realtime PCR in food samples with low background microflora, such as milk and sausage. However, a significant statistical difference was found between the culture methods and real-time PCR for raw pork and vegetable salad. Furthermore, the colony PCR test of the presumptive colonies on BP agar for confirming S. aureus is more accurate and efficient than the coagulase test for unprocessed foods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.1
• /
• pp.14-23
• /
• 2015

This study examined the glycemic indices (GIs) and glycemic loads of carbohydrate-rich snacks in Korea according to variety and cooking method. The most popular carbohydrate snacks (corn, potatoes, sweet potatoes, chestnuts, and red beans) from the Korean National Health and Nutrition Examination Survey nutrient database were cooked using a variety of conventional cooking methods (steaming, baking, porridge, puffing, and frying). The GIs of foods were measured in 60 healthy males after receiving permission from the University Hospital institutional review board (KMC IRB 1306-01). Blood glucose and insulin levels were then measured at 0, 15, 30, 60, 90, and 120 min after consuming glucose, and each test food contained 50 g of carbohydrates (corn: 170.0 g, potatoes: 359.7 g, sweet potatoes: 160.3 g, chestnuts: 134.8 g, red beans: 73.1 g). GI values for test foods were calculated based on the increase in the area under the blood glucose response curve for each subject. Steamed potatoes ($93.6{\pm}11.6$), corn porridge ($91.8{\pm}19.5$), baked sweet potatoes ($90.9{\pm}9.6$), baked potatoes ($78.2{\pm}14.5$), steamed corn ($73.4{\pm}9.9$), and steamed sweet potatoes ($70.8{\pm}6.1$) were shown to be considered high GI foods, whereas baked chestnuts ($54.3{\pm}6.3$), red bean porridge ($33.1{\pm}5.5$), steamed red beans ($22.1{\pm}3.2$), fried potatoes ($41.5{\pm}7.8$), and ground and pan-fried potatoes ($28.0{\pm}5.1$) were considered as low GI foods. The results suggest that the cooking method of carbohydrate-rich snacks is an important determinant of GI values.

• Journal of Science and Technology Studies
• /
• v.16 no.2
• /
• pp.99-147
• /
• 2016

This paper critically reviews the previous discussion over public engagement with science and technology by Science and Technology Studies literatures with a focus on justification and acceptance. Recent studies pointed out that the "participatory turn" after the late 1990s was followed by confusion and disagreement over the meaning and agency of public engagement. Their discussion over the reproduction of the ever-present boundary between science and society along with so-called late modernity and post-normal science and sometimes through the very processes of public engagement draws fresh attention to the old problem: how can lay participation in decision-making be justified, even if we agree that privileging the position of experts in governance of science and technology is no longer justified? So far STS have focused on two conditions for participatory turn-1) uncertainties inherent in experts' ways of knowing and 2) practicability of lay knowledge. This paper first explicated why such discussion has not been logically sufficient nor successful in promoting a wide and well-thought-out acceptance of public engagement. Then the paper made a preliminary attempt to explain what new types of expertise can support the construction and sustainment of participatory governance in science and technology by focusing on one case of lay participation. The particular case discussed by the paper revolves around the actions of a civil organization and an activist who led legal and regulatory changes in wind power development in Jeju Special Self-governing Province. The paper analyzed the types of expertise constructed to be effective and legitimate during the constitution of participatory energy governance and the local society's support for it. The arguments of this paper can be summarized as follows. First, an appropriate basis of the normative claim that science and technology governance should make participatory turn cannot be drawn from the essential characteristics of lay publics-as little as of experts. Second, the type of 'expertise' which can justify participatory governance can only be constructed a posteriori as a result of the practices to re-construct the boundaries between factual statements and value judgment. Third, an intermediary expertise, which this paper defines as a type of expertise in forming human-nonhuman associations and their new pathways for circulations, made significant contribution in laying out the legal and regulatory foundation for revenue sharing in Jeju wind power development. Fourth, experts' conventional ways of knowing need to be supplemented, not supplanted, by lay expertise. Ultimately, the paper calls for the necessity to extend STS discussion over governance toward following the actors. What needs more thorough analysis is such actors' narratives and practices to re-construct the boundaries between the past and present, facts and values, science and society. STS needs a renewed focus on the actual sites of conflicts and decision-making in discussing participatory governance.

• Korean Journal of Remote Sensing
• /
• v.17 no.1
• /
• pp.33-44
• /
• 2001

The paper presents several satellite models and satellite image decomposition methods for inaccessible area where ground control points can hardly acquired in conventional ways. First, 10 different satellite sensor models, which were extended from collinearity condition equations, were developed and then behavior of each sensor model was investigated. Secondly, satellite images were decomposed and also pseudo images were generated. The satellite sensor model extended from collinearity equations was represented by the six exterior orientation parameters in $1^{st}$, $2^{nd}$ and $3^{rd}$ order function of satellite image row. Among them, the rotational angle parameters such as $\omega$(omega) and $\Phi$(phi) correlated highly with positional parameters could be assigned to constant values. For inaccessible area, satellite images were decomposed, which means that two consecutive images were combined as one image, The combined image consists of one satellite image with ground control points and the other without ground control points. In addition, a pseudo image which is an imaginary image, was prepared from one satellite image with ground control points and the other without ground control points. In other words, the pseudo image is an arbitrary image bridging two consecutive images. For the experiments, SPOT satellite images exposed to the similar area in different pass were used. Conclusively, it was found that 10 different satellite sensor models and 5 different decomposed methods delivered different levels of accuracy. Among them, the satellite camera model with 1st order function of image row for positional orientation parameters and rotational angle parameter of kappa, and constant rotational angle parameter omega and phi provided the best 60m maximum error at check point with pseudo images arrangement.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.5
• /
• pp.79-92
• /
• 2019

When asked about the success factors of successful entrepreneurs and celebrities, he says he was lucky. The remarkable fact is that the attitude about luck is different. However, despite the fact that the belief that we believe is lucky is actually a dominant concept, there has not been much scientific verification of luck. In this study, we saw good luck not being determined randomly by the external environment, but by being able to control luck through the internal attributes of individuals. This study is significant that we have empirically elucidated what kind of efforts have gained good luck, whereas previous research has largely ended in vague logic where luck ends up with an internal locus of control among internal entrepreneurial qualities and efforts can make a successful entrepreneur. We introduced the concept of good luck belief to avoid confirmation bias, which is, to interpret my experience in a direction that matches what I want to believe, and used a good luck belief questionnaire in previous studies and tried to verify that those who have a good belief can increase entrepreneurial opportunity capability through planned happenstance skills. The reason for choosing the entrepreneurial opportunity capacity as a dependent variable was based on the conventional research, that is, the process of recognizing and exploiting the entrepreneurial opportunity is an important part of the entrepreneurship research For empirical research, we conducted a questionnaire survey of a total of 332 people, and the results of the analysis turned out that the belief of good luck has all the positive impacts of planned happenstance skills' sub-factors: curiosity, patience, flexibility, optimism and risk tolerance. Second, we have shown that only the perseverance, optimism, and risk tolerance of planned happenstance skills' sub-factors have a positive impact on this opportunity capability. Thirdly, it was possible to judge that the sub-factors of planned happenstance skills, patience, optimism, and risk tolerance, had a meditating effect between belief in luck and entrepreneurial opportunity capability. This study is highly significant in logically elucidating that people in charge of business incubation and education can get the specific direction when planning a training program for successful entrepreneur to further enhance the entrepreneurial opportunity ability, which is an important ability for the entrepreneur's success.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.347-355
• /
• 2021

During the earthquake, for multi-story structure, if the first floor is soft, the deformation will concentrate on that floor causing a serious damage to the column members which might leads to the collapse of the whole structure like Piloti structure during the Pohang earthquake in Korea. According to the 2016 National Disaster Management Research Institute's "Investigation of Seismic Reinforcement and Cost Analysis of Domestic Non-seismic Buildings", the rate of seismic resistance of private reinforced concrete buildings was 38.3 %. Among them, it was reported that the seismic-resistance ratio of the two to five-story structures was less than 50 %. Accordingly, the government is trying to improve the seismic rate through support projects, but the conventional seismic reinforcement methods are still expensive, and emergency construction is difficult. Therefore, in this study, the field applicability was evaluated by improving the reinforcement method using Velcro, which was developed through the research project of the Ministry of Land, Transport and Maritime Affairs in 2014. In order to improve the performance of the Velcro reinforcement method, introducing the initial tension of Velcro using high foaming rigid urethane filling between the Velcro and concrete of the columns was applied. Additionally, an experiment was conducted to evaluate the ductility of Velcro specimen from the concrete confinement effect. As a result, the ductility of the Velcro specimen was improved compare to Normal specimen. However, the energy dissipation capacity of VELCRO2 is better than VELCRO1, yet the maximum ductility of those two specimens did not show a significant difference. Therefore, the improvement of the internal filler material is still needed to have a better maximum ductility.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.737-743
• /
• 2018

Patient exposure dose exposure test, which is one of the items of accuracy control of Computed Tomography, conducts measurements every year based on the installation and operation of special medical equipment under Article 38 of the Medical Law, And keep records. The CT-Dose phantom used for dosimetry can accurately measure doses, but has the disadvantage of high price. Therefore, through this research, the existing CT - Dose phantom was similarly manufactured with a 3D printer and compared with the existing phantom to examine the usefulness. In order to produce the same phantom as the conventional CT-Dose phantom, a 3D printer of the FFF method is used by using a PLA filament, and in order to calculate the CTDIw value, Ion chambers were inserted into the central part and the central part, and measurements were made ten times each. Measurement results The CT-Dose phantom was measured at $30.44{\pm}0.31mGy$ in the periphery, $29.55{\pm}0.34mGy$ CTDIw value was measured at $30.14{\pm}0.30mGy$ in the center, and the phantom fabricated using the 3D printer was measured at the periphery $30.59{\pm}0.18mGy$, the central part was $29.01{\pm}0.04mGy$, and the CTDIw value was measured at $30.06{\pm}0.13mGy$. Analysis using the Mann - Whiteney U-test of the SPSS statistical program showed that there was a statistically significant difference in the result values in the central part, but statistically significant differences were observed between the peripheral part and CTDIw results I did not show. In conclusion, even in the CT-Dose phantom made with a 3D printer, we showed dose measurement performance like existing CT-Dose phantom and confirmed the possibility of low-cost phantom production using 3D printer through this research did it.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.39-48
• /
• 2019

This research is based on the analysis of in-depth interviews of designers who participated in the design of the Yeonnam-dong section, which was completed in 2016. The case study site has received many domestic and foreign awards and is receiving very positive reviews from actual users. 53 concepts were derived from the open coding of the ground theory methodology. Thirty-four higher categories incorporated the concepts and 18 higher categories that reintegrated them. Later, the six categories of the ground theory were interpreted as the paradigm, and it was determined that the aspects of 'will of client' and 'work efficiency', 'site resources' and 'field manager's specialty' were the categories that had the greatest positive impact on the park construction. The key category of this park's construction was interpreted as "a park-construction model with active empathy and communication." The results of the study and are linked to the following research proposals. First, the need to improve the trust between the client and the landscape designer and the need to improve the customary administrative procedures; second, the importance of the input of landscape experts into the park construction process; third, the importance of all efforts to develop the design; fourth, the importance of on-site circular resources and landscape preservation; and fifth active social participation to increase the opportunity. This study, which seeks to grasp the facts that existed behind the park's construction, which received excellent internal and external evaluations, and has a qualitative, objective and structural interpretation of the social network related to the park's construction, in contrast to the conventional quantitative post-evaluation. It is expected that the administration and system improvements related to landscaping will be further improved through the continuation of in-depth post-evaluation studies.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.581-588
• /
• 2019

MRI is superior when contrasted to help the organization generate artifacts resolution, but also affect the diagnosis and create a image that can not be read. Metal is inserted into the tooth, it is necessary to often be inhibited in imaging by causing the geometric distortion due to the majority and if the difference between the magnetic susceptibility of a ferromagnetic material or paramagnetic reducing them. The purpose of this study is to conduct a metal artefact in accordance with the analysis using a diamagnetic material. The magnetic material include a wire for the orthodontic bracket and a stainless steel was used as a diamagnetic material was used copper, zinc, bismuth. Testing equipment is sequenced using 1.5T, 3T was used was measured using a SE, TSE, GE, EPI. A self-produced phantom material was used for agarose gel (10%) to a uniform signal artifacts causing materials are stainless steel were tested by placing in the center of the phantom and cover inspection of the positive cube diamagnetic material of 10mm each length.After a measurement artefact artifact zone settings area was calculated using the Wand tool After setting the Low Threshold value of 10 in the image obtained by subtracting images, including magnetic material from a pure tool phantom images using Image J. Metal artifacts occur in stainless steel metal artifact reduction was greatest in the image with the bismuth diamagnetic materials of copper and zinc is slightly reduced, but the difference in degree will not greater. The reason for this is thought to be due to hayeotgi offset most of the susceptibility in bismuth diamagnetic susceptibility of most small ferromagnetic. Most came with less artifacts in image of bismuth in both 1.5T and 3T. Sequence-specific artifact reduction was most reduced artifacts from the TSE 1.5T 3T was reduced in the most artifacts from SE. Signal-to-noise ratio was the lowest SNR is low, appears in the implant, the 1.5T was the Implant + Bi Cu and Zn showed similar results to each other. Therefore, the results of artifacts variation of diamagnetic material, magnetic susceptibility (${\chi}$) is the most this shows the reduced aspect lower than the implant artificial metal artifacts criteria in the video using low bismuth susceptibility to low material the more metal artifacts It was found that the decrease. Therefore, based on the study on the increase, the metal artifacts reduction for the whole, as well as dental prosthesis future orthodontic materials in a way that can even reduce the artifact does not appear which has been pointed out as a disadvantage of the solutions of conventional metal artifact It is considered to be material.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2019

Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in $34^{\circ}C$ distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE $L^*a^*b^*$ color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in $34^{\circ}C$ distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ${\Delta}E$ values compared to PoGo and control group (P < 0.05). The ${\Delta}E$ values of polished group showed the significantly lower than the ${\Delta}E$ values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ${\Delta}E$ values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ${\Delta}E$ values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.