• KDI Journal of Economic Policy
• /
• v.14 no.1
• /
• pp.147-165
• /
• 1992

This paper analyzes the macroeconomic effects of elections on the Korean economy and their future ramifications. It measures the shocks to the Korean economy caused by elections by taking the average of sample forecast errors from four major elections held in the 1980s. The seven variables' Bayesian Vector Autoregression Model which includes the Monetary Base, Industrial Production, Consumption, Consumer Price, Exports, and Investment is based on the quarterly time series data starting from 1970 and is updated every quarter before forecasts are made for the next quarter. Because of this updating of coefficients, which reflects in part the rapid structural changes of the Korean economy, this study can capture the shock effect of elections, which is not possible when using election dummies with a fixed coefficient model. In past elections, especially the elections held in the 1980s, $M_2$ did not show any particular movement, but the currency and base money increased during the quarter of the election was held and the increment was partly recalled in the next quarter. The liquidity of interest rates as measured by corporate bond yields fell during the quarter the election and then rose in the following quarter, which is somewhat contrary to the general concern that interest rates will increase during election periods. Manufacturing employment fell in the quarter of the election because workers turned into campaigners. This decline in employment combined with voting holiday produce a sizeable decline in industrial production during the quarter in which elections are held, but production catches up in the next quarter and sometimes more than offsets the disruption caused during the election quarter. The major shocks to price occur in the previous quarter, reflecting the expectational effect and the relaxation of government price control before the election when we simulate the impulse responses of the VAR model, imposing the same shocks that was measured in the past elections for each election to be held in 1992 and assuming that the elections in 1992 will affect the economy in the same manner as in the 1980s elections, 1992 is expected to see a sizeable increase in monetary base due to election and prices increase pressure will be amplified substantially. On the other hand, the consumption increase due to election is expected to be relatively small and the production will not decrease. Despite increased liquidity, a large portion of liquidity in circulation being used as election funds will distort the flow of funds and aggravate the fund shortage causing investments in plant and equipment and construction activities to stagnate. These effects will be greatly amplified if elections for the head of local government are going to be held this year. If mayoral and gubernatorial elections are held after National Assembly elections, their effect on prices and investment will be approximately double what they normally will have been have only congressional and presidential elections been held. Even when mayoral and gubernatorial elections are held at the same time as congressional elections, the elections of local government heads are shown to add substantial effects to the economy for the year. The above results are based on the assumption that this year's elections will shock the economy in the same manner as in past elections. However, elections in consecutive quarters do not give the economy a chance to pause and recuperate from past elections. This year's elections may have greater effects on prices and production than shown in the model's simulations because campaigners' return to industry may be delayed. Therefore, we may not see a rapid recall of money after elections. In view of the surge in the monetary base and price escalation in the periods before and after elections, economic management in 1992 should place its first priority on controlling the monetary aggregate, in particular, stabilizing the growth of the monetary base.

• Journal of dental hygiene science
• /
• v.16 no.3
• /
• pp.217-224
• /
• 2016

The aim of this study was to evaluate whether the number of existing permanent teeth is associated with chronic obstructive pulmonary disease (COPD) in a representative sample of Korean adults. Data from 3,107 subjects who participated in the 2009 Korea National Health and Nutrition Examination Survey were examined. The dependent variable was COPD and the independent variable was the number of existing permanent teeth. Spirometry results were classified into three groups (normal pattern, restrictive pattern, and obstructive pattern) by trained technicians. We used dichotomized COPD variables (no vs. yes). The number of existing permanent teeth was evaluated by oral examination and divided into 3 groups (0~19, 20~27, and 28). Demographic factors (age group and sex group), socioeconomic status (education and income), health behaviors (smoking and drinking), oral health and behavior (frequency of toothbrushing; periodontitis; decayed, missing, filled, permanent teeth index; and denture status), and general health status (body mass index, diabetes mellitus, and hypertension) were included as confounders in the analysis. Bivariate analysis and multivariate logistic regression analyses including confounders were applied, and all analyses considered a complex sampling design. Stratified analysis was performed by smoking status. After controlling for various confounders, there was a significant association between the number of existing permanent teeth and COPD (odds ratio [OR], 1.90; 95% confidence interval [CI], 1.20~3.00 for the 20~27 group; OR, 3.93; 95% CI, 1.75~8.84 for the 0~19 group). The association was more significant in current smokers (OR, 8.90; 95% CI, 2.53~31.33). Our data indicate that the number of existing permanent teeth was independently associated with COPD, especially in current smokers. Further longitudinal research is needed to determine whether oral health promotion plays a role in the improvement of lung function and prevention of COPD.

• Korean Journal of Ecology and Environment
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2009

This study used a mesocosm which presumes movement of the nutrient (especially $PO_{4^-}P$) in the wetland. After setting up the mesocosm inside the wetland and adding the $PO_{4^-}P$, observed the movement of the $PO_{4^-}P$ every hour. We analyzed the variables which had the possibility of affecting $PO_{4^-}P$ concentration in the wetland-flora, absorbing rate of algae, settling rate, release rate. Immediately after adding $PO_{4^-}P$, the concentration of the TP in water column at each mesocosm was 0.48, 12.4, 20.4, $23.6\;mg\;L^{-1}$, after 21 days they were 0.6, 1.92, 6.97 and $6.94\;mg\;L^{-1}$ respectively. The concentration of the TP in water column at the mesocosm decreased on average 73.7%. The concentration of the $PO_{4^-}P$ inside reed, algae and sediment in the mesocosm was increased from $0.73mg\;gDW^{-1}$, $3.81mg\;gDW^{-1}$, $466.1mg\;kg^{-1}$ to $0.83mg\;gDW^{-1}$, $4.57mg\;gDW^{-1}$ and $813.3mg\;kg^{-1}$ respectively. Algae is more sensitive than reeds in absorption of the nutrient. TP removal by settling was highest. Budgeting of TP indicated that P moved from particulates in the water column to sediment and algae. Immediately after adding $PO_{4^-}P$, water column (24.2%) and sediment (49.0%) dominated TP storage, with algae (10.3%) and reed (16.4%) holding smaller proportions of TP. After 21 days, Sediment (59.0%) and algae (17.9%) dominated TP storage, with water column (7.1%) and reed (15.8%) holding smaller proportions of TP. Estimation of phosphate movement using mesocosms is an appropriate method because wetlands have many controlling factors. Analysed data can be compared to background data for wetland construction and management.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.3
• /
• pp.255-262
• /
• 2003

Objectives : We carried out tests for neurobehavior by using WHO-NCTB (neurobehavioral core test battery) and Perdue pegboard score test to identify differences between lacunar infarction cases and controls. Methods : Among the subjects who underwent MRI between February 2001 and March 2002 in a university hospital located in Seoul and who were diagnosed only as lacunar infarction without any intracranial disease, 46 patients were selected as cases (male: 21, female: 25). Controls were selected who had no cerebrovascular disease on MRI by matching age (5 years), gender, and education (2 years) in a ratio of 1:1 , Among WHO-NCTB, the following 5 tests and Perdue pegboard score test were used to categorize the study subjects: digit and symbol matching, simple reaction time, Benton visual retention, digit span, and Pursuit aiming test, Results : Among the above 6 tests of neurobehavior, lacunar infarction cases showed lower score than controls except for the simple reaction time test. As the controlling variables of multivariate analysis in the stepwise regression analysis, the followings were selected due to their significant association: age, education, BMI, gender, drinking, exercise, add systolic blood pressure. From multivariate regression analysis, there was significant difference (p<0.05) between lacunar infarction cases and controls in digit and symbol matching, Benton visual retention, digit span, pursuit aiming, and Perdue pegboard score test, but not in the score of simple reaction time test. Conclusions : We suggest that the above 5 tests for neurobehavior, with the exception of the simple reaction time test, might be used as the basis for recommendation of further treatment and other neurological tests by the earlier defection for neurological abnormality in lacunar infarction.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.1
• /
• pp.1-14
• /
• 2023

The objective of the study was to examine the associations of dietary carbohydrate and fat intake with the prevalence of metabolic syndrome in Korean women. A cross-sectional study was employed based on data from the Korea National Health and Nutrition Examination (2007-2016). A total of 22,850 women aged 19 to 69 years were studied after excluding responses from pregnant or lactating women and those with missing metabolic values. Dietary intake data were collected with a 24-hour recall method. Dietary carbohydrate and fat intakes were divided into quintiles. After controlling for confounding variables, a multivariable logistic regression and general linear model were used. The findings indicated that HDL cholesterol levels were lower (p for trend<0.01), while triglyceride levels (p for trend=0.04), waist circumference (p for trend<0.01), and systolic blood pressure (p for trend<0.01) were higher among participants in the highest quintile of carbohydrate intake compared to those in the lowest quintile. Participants in the highest quintile of fat intake had lower waist circumference (p for trend=0.02), triglyceride level (p for trend<0.01), and systolic blood pressure (p for trend<0.01), while higher HDL cholesterol level (p for trend<0.01) compared to those in the lowest fat intake quintile. Metabolic syndrome was more likely to be present in the highest quintile of carbohydrates intake than in the lowest quintile (5^th quintile vs. 1^st quintile, OR: 1.32; 95% CI: 1.11 to 1.57). However, metabolic syndrome was less likely to be present in the highest quintile of fat intake than in the lowest quintile (5^th quintile vs. 1^st quintile, OR: 0.73; 95% CI: 0.61 to 0.86). This study revealed that high dietary carbohydrate intake and low dietary fat intake were associated with metabolic syndrome in Korean women.

• Sleep Medicine and Psychophysiology
• /
• v.22 no.1
• /
• pp.11-19
• /
• 2015

Objectives: Whether daytime sleepiness is proportional to the severity of sleep apnea in obstructive sleep apnea syndrome (OSAS) is controversial. In this study we investigated how insomnia severity affects the association between daytime sleepiness and sleep apnea severity in OSAS. Methods: The present study included 235 male subjects who were diagnosed with OSAS based on clinical history and nocturnal polysomnography. Pearson's correlation analysis was conducted among sleep and mood-related self-reported data, polysomnographic data and demographic data of all subjects. Based on Pittsburgh Sleep Quality Index (PSQI), the subjects were divided into 2 groups; group A (n = 75; $PSQI{\leq}5$) and group B (n = 160; PSQI > 5). Partial correlation analysis was performed between the Epworth Sleepiness Scale (ESS) and other data in both groups. Multiple linear regression analysis was conducted to investigate the factors which affected the ESS in group A. Results: Pearson's correlation analysis showed weak or non-existent correlations between ESS and apnea severity data such as apnea-hypopnea index (AHI) (r = 0.148, p = 0.023), apnea index (AI) (r = 0.137, p = 0.036), hypopnea index (HI) (r = 0.058, p = 0.377), oxygen desaturation index (ODI) (r = 0.149, p = 0.022) and arousal total index (ATI) (r = 0.129, p = 0.048). Positive correlations between ESS and apnea severity data such as AHI ($r_p=0.313$, p = 0.008), AI ($r_p=0.339$, p = 0.004), ODI ($r_p=0.289$, p = 0.015) and ATI ($r_p=0.256$, p = 0.031) were observed only in group A. Multiple regression analysis showed that AI (t = 2.996, p = 0.004) and BAI (t = 2.721, p = 0.008) were associated with ESS in group A. Conclusion: The correlation between daytime sleepiness and sleep apnea severity was shown only in group A. This result suggests that associations between daytime sleepiness in OSAS and sleep apnea severity will become prominent when controlling for insomnia-related variables.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.4 s.59
• /
• pp.669-685
• /
• 1997

Previous studies, reporting the inverse relationship between osteoarthritis and osteoporosis suggest the existence of possible pathophysiologic mechanisms between them. To examinine the hypothesis that 'bone mineral densities of women with osteoarthritis are significantly higher than that of women without osteoarthritis in Korea', subjects from the health and nutritional examination survey in Kuri city were sampled. Samples were selected through multi-stage sampling frame using established clusters in Kuri city. From August 18 to September 10,1997, the survey was conducted. Among the. total number of selected sample population (1,656 people), response .ate was 52.4 percent (348 men and 519 women). 420 women who took BMD measurement, radiologic exam, and anthropometric exam were selected for the analysis. The analytic results are as follows. 1. General characteristics: Mean BMD was $0.493g/cm^2$, mean age was 43.0, mean BMI was $23.9kg/m^2$. The number of women who experienced menopause was 106, hysterectomy was 19. There were 0 case of osteoarthritis of hip, 64 cases of osteoarthritis of knee, and 2 cases of osteoarthritis of hand. 2. Univariate analysis results: Mean BMD of women with the osteoarthritis of knee was significantly lower than that of women without the osteoarthritis of knee(0.4269 vs. $0.5057g/cm^2$). But, there were too few cases of osteoarthritis of hip and hand, so comparative studies of BMD in osteoarthritis of hip and hand could not be conducted. There were significant differences of BMD among pre-menopause group(0.5204), post-menopause group(0.4206), and hysterectomy group(0.4881). Additionally, there were significant differences of BMD among diabetes group(0.4297), impaired glucose tolerance group(0.4874), and normal group(0.5057). Furthermore, age, parity, BMI, bioimpedance were significantly related with BMD. 3. Multivariate analysis results: To examinine the relationship between osteoarthritis and BMD while controlling the other variables' effects which were significant in the univariate analyses, multiple linear regression analysis was done. But, it was found that osteoarthritis of knee was not a significant variable to BMD anymore. While age and menopause had significant negative relationship with BMD. Diabetes, parity, BMI, and bioimpedance did not have significant relationships with BMD. After stratification of subjects according to menopause, multiple linear regression analyses were done to each strata. Consequently, age in post-menopause group, age and osteoarthritis of knee in hysterectomy group showed significant negative relationship with BMD. The results did not support the many results of other previous studies done with white men and women. further studies of biological plausibility to Korean women are recommended. Also it is suggested that longitudinal study to verify the relationship between osteoarthritis and BMD will be valuable.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.363-372
• /
• 1991

We used the health screening data of some rural and urban residents to examine the cross-sectional association between leukocyte count and hypertension. The 206 male and 203 female rural residents were selected by multi-stage cluster sampling method in Kyungsan-Kun area of Kyungbuk province in 1985 and 600 urban residents were selected by the same sampling method as the rural residents in Daegu city of the same province in 1986 compatible with age-sex distribution of Daegu city of 1985 census, but of whom 384 actually responded. The rest of 600 were replaced by age and sex with those who were members of the medical insurance plan visiting the health management department of the university hospital to get the biannual preventive medical checkups. Excluded in the analysis were those having hypertensive history, diseases and extreme outlying values of the screening tests, leaving 373 rural and 571 urban residents. Leukocyte count was measured with ELT-8 Laser shadow method and the unit $cells/mm^3$, Blood pressures were determined with an aneroid sphygmomanometer with pre-standardized method and hypertensives were defined as those showing systolic blood pressure more than 140mmHg and/or diastolic blood pressure more than 90mmHg. Total residents pooled (N=944) showed a significant difference between hypertensives and normotensives ($6965.93{\pm}1997.01\;vs\;6490.61{\pm}1941.32,\;P=0.00$) and in rural residents was noted the similar significant difference (P=0.03). None of significant differences were noted in any stratum stratified by residency and sex. Compared to the lowest quintile of WBC, 2/5 quintile showed odds ratio 0.99 (95% Confidence interval, Ci 0.62-1.59), 3/5 quintile 1.41 (95% CI 0.90-2.21), 4/5 quintile 1.76 (95% CI. 1.14-2.72), and highest quintile 1.80 (1.15-2.82) in the total residents. Likelihood ratio test for linear trend for it indicated a significant trend ($X^2_{trend}=5.53,\;df=1,\;P<0.05$). There were no other significant odds ratios compared to the lowest quintile of WBC in strata stratified by residency and sex. The odds ratios in total residents which had showed significant odds ratios became nonsignificant and of reduced magnitude after controlling age, frequency of smoking and drinking with multiple logistic. regression. In each stratum, it changed magnitudes of odds ratios slightly and unstably. None of the trend tests showed any significant trend. These results suggest that the Friedman et al's finding of association between leukocyte count and hypertension may be due to an statistical type I error resulting from the data dredging in an exploratory study, in which more than 800 variables were screened as possible predictors of hypertension.