• Culinary science and hospitality research
• /
• v.6 no.3
• /
• pp.99-118
• /
• 2000

This study attempts to identify the level of conflicts occurring between foreign and domestic chefs, and to suggest the way of controlling those conflicts in order to well manage human resources, foreign chefs. Based on the empirical research, the research findings shows that in terms of targeting and achieving objectives different level of conflicts are experienced when age, hotel type, position varies. For example. purchasing excessive foreign foods may cause undesirable stock which will lead to considerable loss. In order to overcome this problem the advantages of the chain-operated and the independent hotel's food purchasing system must be incorporated. Secondly, another conflicts arise when the architecture and system of a kitchen is different from what foreign chefs are familiar with. Kitchen architecture and system should be well-designed in terms of delivery channel, sanitation, safety, food control, banquet etc.. In developing menu, chefs often have different criteria in the scale of sweet and salt of a particular dish. Foreign chefs often blame his subordinates for not meeting his requirements without proper training or education. Finally, because of the different culture, communication as well as the lack of mutual understanding problem occur. Even though today is called global town. some chefs do not seem to open their minds to learn other developing countries' culture. In diversity management aspect, chefs need to put much effort to be aware of other countries' culture, history, political and economic situation. In prior to employing foreign chefs, the job enrollment and description must be prepared so as to minimize the conflicts, which otherwise will create poor job performance.

• Journal of Korea Game Society
• /
• v.10 no.5
• /
• pp.39-49
• /
• 2010

The fundamental characteristic that digital games have is interactivity. Digital games need to be systematically categorized so that similarities and differences can be identified and analyzed. Research in the past, however, has not established common criteria for categorizing digital games. This paper resolves that gap by identifying the fundamental characteristic of games, interactivity, and develops a conceptual framework consisting of primary and corresponding participants, and controlling characters. Through an empirical analysis on some digital games, this study shows that the framework could be comprehensive covering all of interactivity during the game. Future research topics are presented based on this framework.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.121-127
• /
• 2012

Vehicle Inspection System is to examine the condition of vehicle regularly at the national level to protect lives and properties of the people from traffic accidents due to vehicle's fault. However, the vehicle inspection method, criteria, period and effectiveness have become a controversial issue, because of examining safety management of vehicle by drivers regardless of regular vehicle inspection. Therefore, the aim of this study is to investigate vehicle inspection timeliness and risk level of inspection items through basic statistical survey and portfolio analysis. The results of the research through practical analysis are: (1) The inspection failure rates between 3 and 6 model year tend to increase. (2) The failure of inspection items for safety highly impacts on traffic accident rate in terms of accident risks. (3) According to the result of portfolio analysis, faulty items located 1st quadrant are riding device, driveline system, controlling device, steering actuator, and fuel system.

• Women's Health Nursing
• /
• v.19 no.1
• /
• pp.57-65
• /
• 2013

Purpose: This study identified the effects of body weight control behaviors on bone mineral density (BMD) in Korean women aged 20 to 39 years. Methods: A secondary analysis of the 5th Korean National Health and Nutrition Examination Survey was conducted. Asian-Pacific criteria of BMI (Body Mass Index) and BMD were calculated for 1,026 women selected. The effects of body weight control behaviors were assessed using binary multiple logistic regression analysis while controlling for BMI. Results: Osteopenia and osteoporosis rates were 32.8% and 2.0%, respectively. About 69% of women performed weight control behaviors, and a combination of diet/exercise (22.7%) and drug added methods (10.9%) for weight control. Women who performed both diet control and exercise had a lower possibility to have abnormal BMD than those who did not try weight control (OR=0.67, CI=0.45~0.98, p=.039). Further weight control behaviors did not influence abnormal BMD. Conclusion: Body weight control should include proper diet and exercise in accordance with each woman's BMI level.

• Structural Engineering and Mechanics
• /
• v.38 no.1
• /
• pp.1-25
• /
• 2011

A new nonlinear model was developed to evaluate the shear resistance of steel fiber-reinforced concrete beams (SFRCB) using linear genetic programming (LGP). The proposed model relates the shear strength to the geometrical and mechanical properties of SFRCB. The best model was selected after developing and controlling several models with different combinations of the influencing parameters. The models were developed using a comprehensive database containing 213 test results of SFRC beams without stirrups obtained through an extensive literature review. The database includes experimental results for normal and high-strength concrete beams. To verify the applicability of the proposed model, it was employed to estimate the shear strength of a part of test results that were not included in the modeling process. The external validation of the model was further verified using several statistical criteria recommended by researchers. The contributions of the parameters affecting the shear strength were evaluated through a sensitivity analysis. The results indicate that the LGP model gives precise estimates of the shear strength of SFRCB. The prediction performance of the model is significantly better than several solutions found in the literature. The LGP-based design equation is remarkably straightforward and useful for pre-design applications.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.46-54
• /
• 1995

The cold cracking susceptibility of a variety of weld metals deposited by GMAW with several kinds of commercial solid wires for high strength-toughness steel was investigated. G-BOP test and LB-TRC test were carried out to study the effects of preheat, chemical composition and hydrogen level on the weld metal cold cracking. The results obtained are as follows. 1) 10% CPT obtained by G-BOP test was the most valuable criteria for evaluating the cold cracking susceptibility of weld metals compared with percentage of cracking at room temperature and crack free temperature, and it had good correlation with the results of LB-TRC test. 2) Cold cracking susceptibility of weld metals was high in the row of MG100A, MG100C, MG100D and MG100B. Welds deposited with MG130 and MG80 showed similar icidents of cracking with MG100C and MG100B respectively, even though their strength levels were different. 3) Diffusible hydrogen level in weld metals which has good relation with hydrogen content in wire itself was the most critical factor for controlling the cold cracking susceptibility of weld metal.

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.479-500
• /
• 2016

Seismic design criteria allow enhancing the structural ductility and controlling the damage distribution. Therefore, detailing rules and design requirements given by current seismic codes might be also beneficial to improve the structural robustness. In this paper a comprehensive parametric study devoted to quantifying the effectiveness of seismic detailing for steel Moment Resisting Frames (MRF) in limiting the progressive collapse under column loss scenarios is presented and discussed. The overall structural performance was analysed through nonlinear static and dynamic analyses. With this regard the following cases were examined: (i) MRF structures designed for wind actions according to Eurocode 1; (ii) MRF structures designed for seismic actions according to Eurocode 8. The investigated parameters were (i) the number of storeys; (ii) the interstorey height; (iii) the span length; (iv) the building plan layout; and (v) the column loss scenario. Results show that structures designed according to capacity design principles are less robust than wind designed ones, provided that the connections have the same capacity threshold in both cases. In addition, the numerical outcomes show that both the number of elements above the removed column and stiffness of beams are the key parameters in arresting progressive collapse.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1588-1593
• /
• 2008

This paper describes a real-time isometric pinch force prediction algorithm from surface electromyogram (sEMG) using multilayer perceptron (MLP) for human robot interactive applications. The activities of seven muscles which are observable from surface electrodes and also related to the movements of the thumb and index finger joints were recorded during pinch force experiments. For the successful implementation of the real-time prediction algorithm, an off-line analysis was performed using the recorded activities. Four muscles were selected for the force prediction by using the Fisher linear discriminant analysis among seven muscles, and the four muscle activities provided effective information for mapping sEMG to the pinch force. The MLP structure was designed to make training efficient and to avoid both under- and over-fitting problems. The pinch force prediction algorithm was tested on five volunteers and the results were evaluated using two criteria: normalized root mean squared error (NRMSE) and correlation (CORR). The training time for the subjects was only 2 min 29 sec, but the prediction results were successful with NRMSE = 0.112 ${\pm}$ 0.082 and CORR = 0.932 ${\pm}$ 0.058. These results imply that the proposed algorithm is useful to measure the produced pinch force without force sensors in real-time. The possible applications include controlling bionic finger robot systems to overcome finger paralysis or amputation.

• Korean Management Science Review
• /
• v.32 no.3
• /
• pp.13-28
• /
• 2015

Using the most recent dataset of Korea and U.S. household finance, this study analyzed demand and adequacy of private pensions for pre-retirees. For this purpose, 2013 Korean Retirement and Income Study (KReIS) of national pension research institute in Korea and 2013 SCF (Survey of Consumer Finances) of FRB in U.S. were used. For comprehensive comparisons of the two countries, this study classified the private pension into sub-categories such as personal pension, corporate pension, and retirement benefits, and used three different criteria including ownership, accumulated present value of each pension, and income replacement ratio of each pension. After controlling for other factors, educational level of householder and household income were critical determinants of size and adequacy of private pension in both countries. Different from Korean households, householders' gender, marital status, and health status had an important effect on the private pension size and adequacy in the U.S. In addition, home ownership significantly increased only private pension adequacy in Korea, and also increased ownership rate, size, and adequacy of private pension in the U.S. Results of this study provide useful implications for future pension system and policy in Korea.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.687-695
• /
• 2015

An experimental study on the automation of the coffee roasting process was conducted. For this study, a temperature sensor, controllers, and motors were added to a manually operated coffee roaster. The temperature, time, and exhausting damper control were selected as the control parameters. The thermocouple measurements were severely influenced by the thermocouple size and location of the roaster. As a result, the standard thermocouple size and location of the roaster were experimentally set to show a similar trend of temperature change by using a previously installed thermometer. A standard roasting process was chosen through repeated roasting experiments and the advice of a roasting expert. The automation of the roasting process was successfully executed using temperature criteria, such as the bean input and first and second crack occurrence, and by controlling the exhausting damper opening time. The control parameters and roaster skills can be used for similar types of roasters for process automation.