• Environmental Engineering Research
• /
• 제10권3호
• /
• pp.105-111
• /
• 2005

The applicability of the USEPA's (United States Environmental Protection Agency) three criteria of enhanced coagulation (criterion 1-TOC level less than 2 mg/l. before chlorination; criterion II-% requirement of TOC removal; criterion III-point of diminishing return) for Korean waters was evaluated in this study. This study also investigated an effect of enhanced coagulation on turbidity removal, and attempted to identify the best coagulant for enhanced coagulation. Three different waters were used in this study: one river water and two lake waters. five different coagulants were used: alum, liquid alum, PACl, ferric chloride with and without water. Results of this study showed that all three criteria were achievable for the tested waters. For these waters, controlling criterion was found to be different depending upon raw water characteristics. When initial Toe level was low(< 4 mg/L), criterion I (< 2 mg/L) could be the controlling criterion. As TOC level increased, criterion II (% TOC removal) became the controlling criteria. It was possible to achieve different goals of turbidity and TOC removals. Although the optimum region of TOC removal was more acidic than that of turbidity removal, there was no conflict between these two removals. The best coagulant was found to be different depending upon the evaluation tool: maximum and optimum removal. ferric chloride was more effective than alum in terms of the maximum TOC removal, while Al-based coagulant such as alum or PACl was the best coagulant in terms of the optimum TOC removal.

• 한국과학교육학회지
• /
• 제31권1호
• /
• pp.32-47
• /
• 2011

본 연구에서는 학생들의 변인 통제 논리력과 변인 통제 활동을 분석하고자 하였다. 이를 위해 먼저 변인 통제 능력에 대한 구체적인 채점 기준을 개발하였다. 이어서, 중학교 2학년에 재학 중인 30명의 학생을 대상으로 학생들의 변인 통제 유형을 알아보았다. '계단 빨리 왕복하기'전략을 설계하도록 하는 과제를 부여한 후 얻어진 학생들의 응답 내용을 바탕으로 변인 통제 유형을 분석하였다. 변인 통제의 필요성 인식 여부, 불필요 변인의 배제 여부, 통제 변인의 설계 여부, 조작 변인과 종속 변인의 설계 여부의 네 가지 측면에 따라 유형A~유형F의 여섯 가지 유형으로 분류하였다. 그리고 Lawson의 과학적 사고 수준 검사 문항 중 변인 통제 논리에 해당하는 4개 문항에 대한 답변을 본 연구에서 개발한 채점 기준으로 채점하여 변인 통제 논리력을 측정하였다. Lawson이 개발한 과학적 사고 검사지로 측정한 점수와 변인 통제 논리력 점수의 상관 계수는 .67로 과학적 사고력와 변인 통제 논리력의 상관은 높은 것으로 나타났다(p<.01). 이는 본 연구에서 개발한 채점 기준이 학생들의 변인 통제 능력을 객관적으로 평가할 수 있다고 판단할 수 있으며, 또한 학생들의 과학적 사고력을 측정하는데 이용할 수 있음을 의미하는 것이다.

• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.191-199
• /
• 2016

In this study, we investigate the safety requirements and test methods of a radiofrequency stimulator. The main test items include controls of a minimum output, accommodation range, and output parameters that have been known as the safety requirements in conformity with international standards. As the test criteria for controlling the minimum output, an increase or decrease in a unit of 1 mA or 1 V or less was applied to the output amplitude regulator for both continuous and discontinuous control, and the output at the minimum setting was manipulated to not exceed 2% of the maximum setting. For controlling the output parameters, one of the representative test criteria states that the current limit of 250 mA should be equal to or less than 1,500 Hz. Consequently, when applying the radiofrequency stimulator on the human body, we need to ensure that the safety requirements conform to the international standards.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2005년도 추계학술대회 논문집
• /
• pp.80-82
• /
• 2005

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.339-344
• /
• 2001

The transmission pipeline industry spends many millions of dollars annually performing inline inspections, excavating sites of possible corrosion, and repairing or replacing damaged sections of pipe. New criteria for evaluation the integrity of corroded pipe have been developed in recent years to help in controlling these costs. These new criteria vary widely in their estimates of integrity and the most appropriate criterion for a given pipeline is not always clear. This paper presents an overview, comparison and evaluation of acceptability criteria for corrosion defects in pipelines. By full scale burst tests, this paper have assessed the relative accuracy of each of theses criteria in predicting failure and remaining strength. Many of the criteria appear to be excessively conservative and indicate that defects must be repaired when none is needed, based upon burst test data.

• 대한가정학회지
• /
• 제42권3호
• /
• pp.51-64
• /
• 2004

The purpose of this study was to compare shopping orientations and purchase criteria according to the occupational status; professionals, non-professionals, and homemakers among female consumers. Subjects were selected from mailing lists through a random sampling technique in the United States. Collection of the research data was made using an adaptation of the Total Design Method for implementing mail surveys. ANOVA, Regression, and Duncan Test were used to conduct the data analysis on 254 out of 1000 questionnaires. The three job status showed significant differences in 5 shopping orientations(sex role oriented, fashion conscious, credit oriented, catalog oriented, and value oriented). Even after controlling the effect of income and education level, significant differences were noticed in 4 shopping orientations, the exception being value conscious. Brand, price, and country of origin among the job status groups also showed significant differences in results for purchase criteria.

• 한국의류학회지
• /
• 제37권5호
• /
• pp.704-714
• /
• 2013

Diverse characters have been recently used in fashion products for children. The degree to which parents accept children's opinions or attitudes when they engage in dialogue may be connected with consumer socialization and affect the criteria for the evaluation of character fashion products. This study examined the effects of mothers' childrearing attitudes on consumer socialization and the evaluation criteria for character fashion products for children. A questionnaire was conducted via the Internet on 310 mothers with children aged between four and twelve. The results of the study showed: First, childrearing attitudes were divided into four dimensions: hostility, autonomy, acceptance, and control. Consumer socialization was divided into communication in regards to consumption, consumption control, and the awareness of social relations. The evaluation criteria for character fashion products for children were divided into educational/utilitarian values, emotional values, and social values. Second, mothers were divided into an acceptance group, a moderation group, and a hostility group based on childrearing attitudes. The group with hostile childrearing attitudes had control over their children's consumption and were conscious of others in the process of consumption. The group with accepting childrearing attitudes considered educational/utilitarian values and emotional values when they purchased character fashion products for children. The group with hostile childrearing attitudes considered social values. Third, autonomous childrearing attitudes had the largest influence on communication in regards to consumption. Controlling childrearing attitudes had the largest influence on consumption control and the awareness of social relations. Controlling childrearing attitudes had the largest influence on social/utilitarian and emotional values; however hostile childrearing attitudes had the largest influence on social values.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.203-210
• /
• 2002

The transmission pipeline industry spends many millions of dollars annually performing inline inspections, excavating sites of possible corrosion, and repairing or replacing damaged sections of pipe. New criteria fur evaluation of the integrity of corroded pipe have been developed in recent years to help in controlling these costs. These new criteria vary widely in their estimates of integrity and the most appropriate criterion fur a given pipeline is net always clear. This paper presents an overview, comparison and evaluation of acceptability criteria for corrosion deflects in pipelines. By full scale burst tests, this paper has assessed the relative accuracy of each of theses criteria in predicting burst pressure. Many of the criteria appear to be excessively conservative and indicate that deflects must be repaired when none is needed, based upon burst test data.

• 한국물환경학회지
• /
• 제33권2호
• /
• pp.197-202
• /
• 2017

This paper aimed to evaluate the test results of acute toxicity on effluent samples which were exempted from applying of ecotoxicity criteria. Total 316 effluent samples which were free from controlling of ecotoxicity regulation, were tested. Ratio of effluent samples which were exceeded the ecotoxicity criteria (TU > 1) indicated 23.7%. This ratio was a little bit higher than previous study (22.7%) on effluent samples which were controlled under ecotoxicity criteria. These results mean that our ecotoxicity management system is not appropriate and applying of ecotoxicity criteria to all effluent samples (82 industry categories) were needed in order to improve our ecotoxicity system. In addition, the same numeric criteria (TU 1 or 2) for all industry categories were proposed in consideration of these results. Ratio of effluent samples which exceeded the ecotoxicity criteria (TU > 1) with D. magna indicated 23.7%. However V. fischeri showed 14.6%. As a acute toxicity test organism, D. magna seemed to be more sensitive than V. fischeri. Ratio of samples which were exceeded TU 1 with D. magna by 24 h exposure period test indicated 35 %, whereas 48 h showed 41%.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.616-619
• /
• 1996

This paper presents the configuration methodology of Distributed Control System(DCS)s for process plant and their performance evaluation. Performance evaluation is specified both in terms of operational and installation aspects of system. In order to evaluate performance criteria of operational aspect, a simulation method is proposed. Modeling of system components including process computer, database, process controllers and LANs, etc, is implemented for simulation. Based on these characteristics, different system configurations are evaluated and compared through results about evaluation criteria in order to select the best DCS for particular process. The results, in abbreviated form, of the performance evaluation of DCS controlling a CAL(Continuous Annealing Line) plant of iron process are presented.