• 한국항공우주학회지
• /
• 제45권11호
• /
• pp.967-974
• /
• 2017

반작용휠은 저속구간에서 마찰로 인해서 비선형 토크 응답을 보인다. 따라서 이 구간에서는 위성의 정밀한 자세제어를 달성하기 어렵다. 기존 연구들은 마찰력 보상이나 디더명령을 인가하는 방법을 사용하여 본 문제를 해결하려 하였다. 하지만 마찰력 모델링의 어려움이나 휠속도의 빈번한 영점 교차 때문에, 이러한 방법을 실제 위성 자세제어에 적용하기에는 어려움이 있다. 이를 해결하기 위해서, 자세오차에 따라서 자세제어기의 이득값을 조절하는 방법을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.530-532
• /
• 1999

In adaptive fuzzy control, system designer develops an adaptive law for the output of the unknown plant to track a given signal. The adaptation gains of the adaptive law are critical elements in the overall system, however, they were used to be selected by the designer's experience or intuition. In this paper, genetic algorithm is used to search an optimal adaptation gain and simulation results will be presented to show the improved tracking responses.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1708-1712
• /
• 2008

This paper describes a linear matrix inequality (LMI) approach to the design of robust low-order power system stabilizers (PSSs), which are used to damp out local-mode oscillations of synchronous generators. The performance of a PSS is expressed as the location of the closed-loop poles, and a single fixed-gain pole-placement controller is synthesized for a wide range of operating conditions. The synthesis results in simultaneous regional pole-placement stabilization. and is formulated as an LMI feasibility problem with a rank condition. A penalty method is applied to solve the rank-constrained LMI problem. Numerical experiments with a single-machine connected to an infinite bus system were performed to demonstrate the proposed method.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1253-1263
• /
• 2002

The control system design and modeling of an unmanned vehicle by means of a new concept for better performance through a tole-operation system is suggested by sensor fusion. But, the control of a real vehicle is very difficult, because the system identification of the vehicle is hard to find the unknown factors and the disturbances of the experimental environment. For the longitudinal and lateral controls, the traction system and steering system models are set up and a tuning method to find the gain of the controller by experiments is presented. In this research, mechanical and electronic parts are implemented to operate the unmanned vehicle and data reconstruction method of information about the environment data coming from several sensors is presented by data plot for the vehicle navigation. This paper focuses on the integration of tole-operated unmanned vehicle. This vehicle mainly controlled lateral and longitudinal directions with actuators for controlling vehicle movement and sensors for the closed-loop controlled system.

• 전기학회논문지
• /
• 제62권5호
• /
• pp.679-687
• /
• 2013

This paper proposes a new condition about delay-dependent robust $H_{\infty}$ control of uncertain linear systems with time-varying delay and randomly occurring disturbances. The norm bounded uncertainties are subjected to the system matrices. Based on Lyapunov stability theory, a sufficient condition for designing a controller gain such that the closed-loop systems are asymptotically stable with $H_{\infty}$ disturbance level ${\gamma}$ is formulated in terms of linear matrix inequalities (LMIs). Finally, two numerical examples are included to show the effectiveness of the presented method.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 2부
• /
• pp.688-691
• /
• 2010

본 논문에서는 이전에 개발된 만타형 무인 잠수정의 수학적 모델을 기초로 하여 모델 불확실성과 외란이 존재하는 경우에 강인한 제어 성능을 나타낼 수 있는 강인 제어기를 설계하였다. 제어기 설계는 수심 제어와 방향 제어로 분리하여 수행하였고, 이를 위하여 6자유도의 수학적 운동 방정식을 수심 및 방향 제어를 위한 운동 방정식으로 각각 표현하였다. 운동 방정식에 나타나는 유체력 계수에 불확실성이 존재하고 운항 중 발생하는 조류등을 외란이 존재하는 것으로 생각하고 강인 제어기를 설계하였다. 강인 제어기의 전체적인 구조는 백스테핑 방법을 사용하였고, 모델 불확실성과 조류를 외란으로 가정하여 외란의 영향을 효과적으로 감쇠시킬 수 있는 $L_2$-gain 분석 개념을 이용하였다. 시뮬레이션은 제어기 설계에 사용된 유체력 계수에 실제값과 차이를 주었고, 조류의 모델을 포함시켜 수행하였다. 시뮬레이션 결과는 모델 불확실성과 외란의 존재하는 경우에도 제어 성능에 큰 변화가 나타나지 않는 것을 보여 주었다.

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.38-46
• /
• 2015

This paper propose a variable parameter estimations for variable over current load of five-phase squirrel-cage induction motor(IM) to servo control system. In order to high performance control of AC motor using a field oriented control(FOC) and direct torque control(DTC) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, torque command of current components, rotor position, speed estimation, and so on. We are suggest a analyzed estimation results of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental within variable over current load at rated input frequency. There are results of stator winding measurement, no-load test, locked-rotor test, variable over current load test, and estimated parameters of equivalent circuits using manufactured experimental apparatus by IEEE Standard Test Procedure for Polyphase Induction Motors and Generators 112-2004.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.641-645
• /
• 2004

This paper presents a new speed control method using the acceleration feedforward compensation and using the disturbance torque estimate method. The proposed method improve transition response characteristic of system and has been a robust characteristic in the four-switch three-phase motor drive system in which the gain of speed controller cannot be made large enough. The simulation results prove the validity of the proposed method.

• 한국통신학회논문지
• /
• 제17권4호
• /
• pp.361-370
• /
• 1992

수직 이착륙기와 같은 비행체의 정지비행 도중 비행체의 위치각, 각속도, 각가속도와 같은 상태량을 궤환 시킨 SRFIMF(State Rate Feedback Implicit Model-Following)이론을 이용하여 4개의 팬을 갖는 부상제어시스템을 구성하였다. 이 부상제어시스템의 yaw제어를 행하여, 각 상태궤환이득 및 전향경로 이득을 변화시켜 부상제어시스템의 특정을 해석하였으며, 부상시스템과 같은 제어계에 SRFIMF방식을 적용시켜 그 타당성을 조사하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.777-779
• /
• 2001

In this study, we have estimated the brushless DC motor parameters by means of back-emf measurement and step input test. The validity of proposed parameter estimation method is confirmed by step res pons experiment. And the reasonable digital controller is designed with the root locus method of motor transfer function and revised Ziegler-Nichols gain determination method. The system stability is experimentally verified by the frequency domain analysis used Bode plot.