• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1520-1524
• /
• 2005

This paper describes the racemic and stereoselective synthetic route for a novel 4'$\alpha$-phenyl and 6'$\alpha$-methyl doubly branched carbocyclic nucleosides from an acyclic 2-hydroxy acetophenone. The installation of phenyl group at the 4'-position of carbocyclic nucleoside was successfully accomplished via a sequential [3,3]-sigmatropic rearrangement. The stereoselective introduction of a methyl group in the 6'$\alpha$-position was accomplished by Felkin-Anh controlled alkylation. Bis-vinyl 11 compound was successfully cyclized using a Grubbs’ catalyst II to desired carbocycles. The natural bases (adenine and cytosine) were efficiently coupled using a Pd(0) catalyst. Although all the synthesized compounds were examined for their activity against several viruses such as HIV-1, HSV-1, HSV-2 and HCMV, only cytosine analogues 17 exhibited weak antiviral activity against HCMV.

• 한국재료학회지
• /
• 제25권10호
• /
• pp.537-542
• /
• 2015

One-dimensional (1D) silver nanostructures, which possess the highest conductivity among all room-temperature materials, moderate flexibility and high transmittance, are one of the most promising candidate materials to replace conventional indium tin oxide transparent electrodes. However, the short length and large diameter of 1D silver nanostructures cause a substantial decrease in the optical transparency or an increase in the sheet resistance. In this work, ultra-long silver nanofiber networks were synthesized with a low-cost and scalable electrospinning process, and the diameter of the nanofibers were finetuned to achieve a higher aspect ratio. The decrease in the diameter of the nanofibers resulted in a higher optical transparency at a lower sheet resistance: 87 % at $300{\Omega}/sq$, respectively. It is expected that an electrospun silver nanofiber based transparent electrode can be used as a key component in various optoelectronic applications.

• 미생물학회지
• /
• 제25권3호
• /
• pp.189-197
• /
• 1987

배지성분으로 첨가된 glutamate의 농도가 균의성장고 tylosin 생합성에 미치는 영향을 조사하였다. 그 결과 oxaloacetate를 공동기질로 사용하는 효소의 활성에 의하여 균의 성장과 tylosin의 생합성이 조절됨을 알았다. 즉, citrate synthase와 aspartate aminotransferase의 활성은 균의 성장에 아주 긴요하며 methylmalonyl-CoA carboxytransferase의 활성은 tylosin 생합성에 아주 중요한 효소임을 알았다. Glutamate의 농도는 우의 효소의 활성에 직접적으로 영향을 주고 있음을 알았다.

• Carbon letters
• /
• 제9권3호
• /
• pp.218-231
• /
• 2008

Carbon fibers are a new breed of high-strength materials which have been described as a fiber containing at least 90% carbon obtained by the controlled pyrolysis of appropriate fibers. Carbon fiber composites are ideally suited to applications where strength, stiffness, lower weight, and outstanding fatigue characteristics are critical requirements. They also can be used in the occasion where high temperature, chemical inertness and high damping are important. In recent decades, carbon fibers have found wide applications in commercial and civilian aircraft, recreational, industrial, and transportation markets. Therefore, understanding the basic structure, synthesis and physicochemical properties of carbon fibers is very important to apply them as a precursor of above applications. This review paper discuss the general information and manufacture technique of carbon fibers used for improving the performance of composite materials in various industries for the present.

• 한국세라믹학회지
• /
• 제17권1호
• /
• pp.27-34
• /
• 1980

The synthesis of glass-ceramic materials from glasses based on industrial wastes or natural rocks their physical properties were studied. Glasses of composition, CaO14.7∼16.1, MgO7.4∼9.0, Al2O38.3∼19.3, SiO2 48.9∼51.0wt% were prepared from domestic blast furnace slag, serpentine, sea sand and etc. with additions of chromic oxide, and fluoride as nucleating agent. The glasses were subjected to controlled heat treatments and yielded fine microstructure of glass-ceramics which were composed of monocrystalline phase of aluminous diopside. X-ray diffraction techniques were adopted to identify the crystalline phases and to determine the degree of crystallization quantitatively. Density, coefficient of thermal expansion, young's modulus, microhardness and modulus of rupture were measured and the resulting properties were discussed in terms of the heat-treatment conditions, the degree of crystallization, species of crystaline phase, the microstructures formed in glass-cramics and the chemical compositions of mother glasses.

• Journal of Microbiology and Biotechnology
• /
• 제10권5호
• /
• pp.599-605
• /
• 2000

Lipopolysaccharide (LPS) is responsible for the tissue injury that occurs following the invasion of multicelluar organisms by Gram-negative microbes. The effect of LPS on IFN-$\gamma$-induced chemokine Mig gene expression in mouse peritoneal macrophages was investigated. Very little Mig mRNA was detectable upon exposure to LPS without IFN-$\gamma$. Although LPS alone is only minimally effective, LPS plus IFN-$\gamma$ synergized to produce a high level of Mig mRNA in the peritoneal macrophages. This synergy was not dependent on a new protein synthesis, and was not controlled at the level of the gene transcription. Futhermore, LPS did not increase IFN-$\gamma$-induced Mig mRNA stability. Accordingly, it is suggested the LPS may synergize the expression of IFN-$\gamma$-induced Mig mRNA through a process that depends on a pretranscriptional level or concurrent Mig mRNA translation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권10호
• /
• pp.457-463
• /
• 2001

This paper presents a simple and new digital redesign algorithm for fuzzy-model-based controllers. In the first stage, a continuous-time TS fuzzy model is constructed for a given continuous-time nonlinear system and a corresponding continuous-time fuzzy-model-based controller is established based on the existing controller synthesis algorithms. In the second stage, the continuous-time fuzzy-model-based controller is converted to equivalent discrete-time fuzzy-model-based controller, aiming at maintaining the property of the analogue controlled system, which are called intelligent digital redesign. Finally, the proposed method is applied to the digital control of inverted pendulum system to shows the effectiveness and the effectiveness and the feasibility of the method.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.428-429
• /
• 2006

Aluminum hydroxides were synthesized by a simple electrolytic reaction of aluminum plates. The aluminum monohydroxide, boehmite(AlO(OH)), was predominantly formed by the application of an electrical potential above 30V, while the mixture of the bayerite$(Al(OH)_3)$ and boehmite(AlO(OH)) phases were formed below 20V. The boehmite has a clear fibrous structure which is controlled on a nanometer scale. On the contrary, the bayerite consists of the typical hourglass or semi-hourglass shaped coarse crystals as a result of an aggregation of the various crystals stacked together. The specific surface area of the boehmite nanofiber was remarkably high, reaching about $300m^2/g$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.551-552
• /
• 2006

This study was attended to demonstrate synthesis of silver nanoparticles stabilized with polymer and their applicability to printed electronics. Silver nanoparticles were synthesized by reduction of silver nitrate in aqueous solution in the presence of polyvinyl pyrrolidone (PVP) as a stabilizer. The ink used here is composed of 50 wt% Ag NP, 15 wt% humectant and then were printed on polyimide film. Particle deposit morphologies were controlled by varying the ink compositions. Printed silver patterns and dots were cured on a convection oven in air at $300^{\circ}C$ for 60 min. The printed patterns show good shape definition and the resistivity of the printed films is about $5{\mu}{\Omega}{\cdot}cm$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.252.1-252.1
• /
• 2013

Hexagonal boron nitride (h-BN) is a two dimensional material which has high band-gap, flatness and inert properties. This properties are used various applications such as dielectric for electronic device, protective coating and ultra violet emitter so on. 1) In this report, we were growing h-BN sheet directly on sapphire 2"wafer. Ammonia borane (H3BNH3) and nickel were deposited on sapphire wafer by evaporate method. We used nickel film as a sub catalyst to make h-BN sheet growth. 2) During annealing process, ammonia borane moved to sapphire surface through the nickel grain boundary. 3) Synthesized h-BN sheet was confirmed by raman spectroscopy (FWHM: ~30cm-1) and layered structure was defined by cross TEM (~10 layer). Also we controlled number of layer by using of different nickel and ammonia borane thickness. This nickel film supported h-BN growth method may propose fully and directly growing on sapphire. And using deposited ammonia borane and nickel films is scalable and controllable the thickness for h-BN layer number controlling.