• 한국항행학회논문지
• /
• 제15권4호
• /
• pp.596-601
• /
• 2011

본 논문에서는 간단한 회로구조와 높은 효율을 갖는 스위칭 방식의 E급 주파수 체배기에 대한 연구를 수행하였다. 주파수 체배는 능동소자의 비선형성에 의해 발생하는데 본 논문에서는 FET 능동소자를 간단한 스위치 및 기생소자 성분 모델로 근사하여 특성을 해석하고자 하였다. FET를 입력에 의해 동작하는 스위치 및 기생소자로 모델링하고 E급 주파수 체배기의 정합소자 값을 유도하였다. ADS시뮬레이터를 이용하여 출력 전압과 전류 파형 및 효율을 시뮬레이션하고 기생성분에 따른 변화를 연구하였다. 기생 커패시턴스, 저항, 인덕턴스에 의한 영향을 시뮬레이션하였으며 입력주파수 2.9GHz, 바이어스전압 2V일 때, 출력주파수 5.8GHz에서 기생커패시턴스가 0pF에서 1pF으로 변화함에 따라 드레인효율은 98%에서 28%로 감소하여 기생커패시턴스 CP가 FET의 기생 성분 중 가장 큰 영향을 끼친 것을 확인했다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권5호
• /
• pp.71-85
• /
• 1993

The Cycloconverter that the author is going to treat in this paper, has strong advantages over the D.C. Link Inverter in points of chattering torque problem and natural commutation. Thus, the Cycloconverter is expected to be well applied to large and low-speed machines which require better speed control at low frequency. But the control circuit of Cycloconverter has two weak points described as follows. 1) Because of its rather complicated control circuit, it is likely to be illoperating due to unexpected noise signals, thus the higher the accuracy and reliability of the circuit is required to be, the more the circuit may cost. 2) Because the load current is not purely sinusoidal, the Cycloconverter may possibly be destroyed in case of inaccurate convert switching resulted from the difficulties in detecting the load current-zero and the current direction at the moment. In this paper, the author first of all intends to design and build a modified VVVF-type Noncirculating Current Cycloconverter to which recently proposed control methods are applied for improving the circuit simplicity, the control performance, and the system reliability. And then, experiments for observing the output waveforms of the Cycloconverter which is controlled by Singled-Board Computer using 8086 16-bit microprocesser are carried out. Finally the author concludes the result of this study as follows. 1) By replacing the conventional analog control circuits such as Reference Wave Generator, Cosine Timing Wave Generator, and Comparator with softwares, a great circuit simplicity is achieved. 2) The output of the designed Cycloconverter changes its frequency very fast without showing discontinuity of its waveform, and this waveform characteristics enables the smooth speed control of Induction Motor. 3) The design control circuit of Cycloconverter can be applied to the systems of 12 or 24 pulses because of its short processing period.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.247.1-247.1
• /
• 2014

The capacitive coupled plasma is used widely in the semiconductor industries. Especially, the uniformity of the industrial plasma is heavily related with defect ratio of devices. Therefore, the industries need the capacitive coupled plasma source which can generate the uniform plasma and control the plasma's uniformity. To achieving the uniformity of the large area plasma, we designed multi-powered electrodes. We controlled the uniformity by controlling the power of each electrode. After this work, we started to research another concept of the plasma device. We make the plasma chamber that has multi-ground electrodes imaginary (CST microwave studio) and simulate the electric field. The shape of the multi-ground electrodes is ring type, and it is same as the shape of the multi-power electrodes that we researched before. The diameter of the side electrode's edge is 300mm. We assumed that the plasma uniformity is related with the impedance of ground electrodes. Therefore we simulated the imaginary chamber in three cases. First, we connected L (inductor) and C (capacitor) at the center of multi-ground electrodes. Second, we changed electric conductivity of multi-ground electrode. Third, we changed the insulator's thickness between the center ground electrode and the side ground electrode. The driving frequency is 2, 13.56 and 100 MHz. We switched our multi-powered electrode system to multi-ground electrode system. After switching, we measured the plasma uniformity after installing a variable vacuum capacitor at the ground line. We investigate the effect of ground electrodes' impedance to plasma uniformity.

• 전력전자학회논문지
• /
• 제15권1호
• /
• pp.43-51
• /
• 2010

본 논문에서는 고전압 전동기 가변속 장치인 H-브릿지 멀티레벨(H-Bridge Multi-Level; HBML) 인버터를 이용한 유도 전동기 벡터 제어시 인버터의 출력 전압 위상 지연 현상을 해석하고 전류 제어기의 보상 기법을 제시하였다. Phase-Shifted Pulse Width Modulation (PSPWM) 기법을 적용한 HBML 인버터는 개별 인버터 모듈이 독립적으로 동작할 수 있어서 확장성과 모듈화 능력이 향상되는 장점이 있다. 그러나 이러한 PSPWM을 적용한 HBML 인버터는 기준 전압과 실제 전압 사이에 위상 차이가 있기 때문에 출력 주파수에 대한 샘플링 주파수의 비율이 충분하지 않은 고속 영역에서 전류 제어기를 불안정하게 하는 원인이 된다. 전류 제어기의 불안정성은 기준 전압과 출력 전압의 위상 차이를 보상하는 제안된 방법을 추가함으로써 제거하였다. 본 방법은 인버터의 스위칭 주파수가 낮고, 전동기 속도가 높은 조건에서 PSPWM을 이용한 HBML 인버터 시스템에 효과적이며, 13레벨로 구성된 HBML 인버터로 구동되는 6,600[V] 1,400[kW] 유도전동기 실험을 통해 제안된 방법의 타당성을 입증하였다.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.679-691
• /
• 2013

High-power electromagnetic transmitter power supplies are an important part of deep geophysical exploration equipment. This is especially true in complex environments, where the ability to produce a highly accurate and stable output and safety through redundancy have become the key issues in the design of high-power electromagnetic transmitter power supplies. To solve these issues, a high-frequency switching power cascade based emission power supply is designed. By combining the circuit averaged model and the equivalent controlled source method, a modular mathematical model is established with the on-state loss and transformer induction loss being taken into account. A triple-loop control including an inner current loop, an outer voltage loop and a load current forward feedback, and a digitalized voltage/current sharing control method are proposed for the realization of the rapid, stable and highly accurate output of the system. By using a new algorithm referred to as GAPSO, which integrates a genetic algorithm and a particle swarm algorithm, the parameters of the controller are tuned. A multi-module cascade helps to achieve system redundancy. A simulation analysis of the open-loop system proves the accuracy of the established system and provides a better reflection of the characteristics of the power supply. A parameter tuning simulation proves the effectiveness of the GAPSO algorithm. A closed-loop simulation of the system and field geological exploration experiments demonstrate the effectiveness of the control method. This ensures both the system's excellent stability and the output's accuracy. It also ensures the accuracy of the established mathematical model as well as its ability to meet the requirements of practical field deep exploration.

• International Journal of Automotive Technology
• /
• 제4권2호
• /
• pp.65-75
• /
• 2003

A HEV evaluation program, funded by ADEME, was carried out by a group of Laboratories of different specialties in order to evaluate and compare consumption, emission and component technologies of the three first HEVs put on the market (Toyota Prius, Nissan Tino and Honda Insight). This paper presents the results obtained until now. These results show good consumption and emission performance of the tested vehicles compared to conventional ones. The energy management seems to be globally the same for the three vehicles excepting for cold stans where the Insight allows a very earlier stop of the engine compared to the Tino and especially to the Prius. A mapping of the engine consumption of the Prius and the Insight was performed in order to furnish data for the simulation models. The Permanent Magnet motors of the Prius and Tino have different number of pair poles and then different emf at a given speed. The low emf values of the Prius allow operation at high speed with less field weakening control than for the Tino. The inverters of the Prius and the Tino, controlled by a PWM at respectively 5 kHz and 7 kHz switching frequency, are made of IGBTs with high commutation performances.

• 조명전기설비학회논문지
• /
• 제20권5호
• /
• pp.33-41
• /
• 2006

관례의 전력계통에서는 스위칭 컨트롤러, 반도체 전력변환 설비, 사무 자동화 기기, PC 등으로 인하여 중성선에 많은 양의 영상 고조파가 발생하게 된다. 이러한 중성선 영상 고조파 전류를 줄이기 위하여 리액터의 일종인 NHER (Neutral-line Harmonics Eliminating Reactor)를 설계하고 해석하는 연구를 수행하였다. C++프로그램을 활용하여 NHER의 설계프로그램을 개발하였고, 설계프로그램을 확인하기 위해 380/220[V], 200[A]의 모델을 적용하여 설계 및 해석하였다. 최적화 설계 결과 철손이 26[%] 저감되었고, 특히 9 고조파는 다른 고조파에 비하여 크게 감소하였다. NHER을 설계할 때에는 실제 적용되는 부하의 영상고조파나 효율 등을 고려하면 더 좋은 결과가 나올 것이다.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.491-498
• /
• 2009

New $\pi$-conjugated multi-branched molecules were synthesized through the Homer-Emmons reaction using alkyl-substituted, 3,4-ethylenedioxythiophene-based, thiophenyl aldehydes and octaethyl benzene-l,2,4,5-tetrayltetrakis(methylene) tetraphosphonate as the core unit; these molecules have all been fully characterized. The two multi-branched conjugated molecules exhibited excellent solubility in common organic solvents and good self-film forming properties. The semiconducting properties of these multi-branched molecules were also evaluated in organic field-effect transistors (OFET). With octyltrichlorosilane (OTS) treatment of the surface of the $SiO_2$ gate insulator, two of the crystalline conjugated molecules, 7 and 8, exhibited carrier mobilities as high as $2.4({\pm}0.5){\times}10^{-3}$ and $1.3({\pm}0.5){\times}10^{-3}cm^2V^{-1}s^{-1}$, respectively. The mobility enhancement of OFET by light irradiation ($\lambda$ = 436 nm) supported the promising photo-controlled switching behavior for the drain current of the device.

• 조명전기설비학회논문지
• /
• 제19권2호
• /
• pp.42-48
• /
• 2005

DC-DC 컨버터는 각종 산업용, 가정용 기기에 널리 이용되어지고 있다. 다양한 전장품을 내장한 자동차에서는 전압이 다른 전장품을 한 개의 밧데리에서 DC-DC 컨버터를 이용해서 전압을 변환해서 이용되고 있다. 그러므로 이와 같은 구성의 전원회로에는 각각의 전장품에 대응하기 위해 복수의 변환기를 필요로 하지만 회로가 복잡하고 코스트가 상승하는 원인이 된다. 본 논문에서는 이러한 배경으로 하나의 전원을 이용한 간단한 구성의 새로운 승$\cdot$강압 초퍼 회로를 제안하여 서로 다른 복수의 출력 전압을 얻었다. 제안한 초퍼 회로는 기존의 회로에 승압용 스위치를 추가하여 구성하였으며, 이를 이용하여 부하를 분할화 시켰다 그리고 제안한 회로는 승압용 스위치와 강압용 스위치의 듀티비를 각각 별도로 조절하여 넓은 범위에서 서로 다른 2개의 출력전압을 정확히 제어하였다. 이러한 모든 사항은 시뮬레이션과 실험을 통하여 그 타당성을 증명하였다.

• Macromolecular Research
• /
• 제13권1호
• /
• pp.45-53
• /
• 2005

In this study, a series of highly swelling hydrogels based on sodium alginate (NaAlg) and polymethacryl­amide (PMAM) was prepared through free radical polymerization. The graft copolymerization reaction was performed in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator and N,N'-methylenebis­acrylamide (MBA) as a crosslinker. The crosslinked graft copolymer, alginate-graft-polymethacrylamide (Alg-g­PMAM), was then partially hydrolyzed by NaOH solution to yield a hydrogel, hydrolyzed alginate-graft-poly­methacrylamide (H-Alg-g-PMAM). During alkaline hydrolysis, the carboxamide groups of Alg-g-PMAM were converted into hydrophilic carboxylate anions. Either the Alg-g-PMAM or the H-Alg-g-PMAM was characterized by FTIR spectroscopy. The effects of the grafting variables (i.e., concentration of MBA, MAM, and APS) and the alkaline hydrolysis conditions (i.e., NaOH concentration, hydrolysis time, and temperature) were optimized systematically to achieve a hydrogel having the maximum swelling capacity. Measurements of the absorbency in various aqueous salt solutions indicated that the swelling capacity decreased upon increasing the ionic strength of the swelling medium. This behavior could be attributed to a charge screening effect for monovalent cations, as well as ionic cross-linking for multivalent cations. Because of the high swelling capacity in salt solutions, however, the hydrogels might be considered as anti-salt superabsorbents. The swelling behavior of the superabsorbing hydrogels was also measured in solutions having values of pH ranging from 1 to 13. Furthermore, the pH reversibility and on/off switching behavior, measured at pH 2.0 and 8.0, suggested that the synthesized hydrogels were excellent candidates for the controlled delivery of bioactive agents. Finally, we performed preliminary investigations of the swelling kinetics of the synthesized hydrogels at various particle sizes.