• 한국미생물·생명공학회지
• /
• 제28권5호
• /
• pp.285-290
• /
• 2000

The effects of dissolved oxy-gen(DO) concentration and DO control modes on cell growth in a 4L computer-controlled bioreactor system were investigated using Phellinus linteus WI-001, a producer of protein-polysaccharides having potent anticancer activi-ties. When DO was controlled at about 20%, maximum cell concentration and specific growth rate of the strain were observed to increase 36% and 64%, respectively, as compared to the experiment performed without DO control. By adopting cascade automatic control of DO ar 20% in a mixed automatic control mode using computer-con-trolled program, 19.5g/L of maximum cell concentration was obtained. These results showed that the mixed auto-matic control mode was the effective method for enhancing cell growth of the shear sensitive Phellinus linteus.

• 한국미생물·생명공학회지
• /
• 제19권5호
• /
• pp.521-535
• /
• 1991

Cephalosporium 배양시 균체의 형태학적 측면을 고려한 cephalosporin C 생합성에 대한 모델식을 제안하였다. 제한기질로 glucose와 methionine을 고려한 double-substrate 모델을 설정하였는데 여기서 glucose는 균체의 증식 정도를, methionine은 균체의 증식속도를 제어하게 된다. Cephalosporin C의 생산은 균체의 형태학적 분화와 밀접한 관계가 있다. 한편 cephalosporin C의 생산성을 증대시키기 위해 모델식을 유가식 배양에 응용하였다.

• Journal of Microbiology and Biotechnology
• /
• 제16권11호
• /
• pp.1690-1698
• /
• 2006

In order to investigate the effect of dissolved oxygen (DO) level on AVM $B_{1a}$ production by a high yielding mutant of Streptomyces avermitilis, five sets of bioreactor cultures were performed under variously controlled DO levels. Using an online computer control system, the agitation speed and aeration rate were automatically controlled in an adaptive manner, responding timely to the oxygen requirement of the producer microorganism. In the two cultures of DO limitation, the onset of AVM $B_{1a}$ biosynthesis was observed to casually coincide with the fermentation time when oxygen-limited conditions were overcome by the producing microorganism. In contrast, this phenomenon did not occur in the parallel fermentations with DO levels controlled at around 30% and 40% throughout the entire fermentation period, showing an almost growth-associated mode of AVM $B_{1a}$ production: AVM $B_{1a}$ biosynthesis under the environments of high DO levels started much earlier than the corresponding oxygen-limited cultures, leading to a significant enhancement of AVM $B_{1a}$ production during the exponential stage. Consequently, approximately 6-fold and 9-fold increases in the final AVM $B_{1a}$ production were obtained in 30% and 40% DO-controlled fermentations, respectively, especially when compared with the culture of severe DO limitation (the culture with 0% DO level during the exponential phase). The production yield ($Y_{p/x}$), volumetric production rate (Qp), and specific production rate (${\bar{q}}_p$) of the 40% DO-controlled culture were observed to be 14%, 15%, and 15% higher, respectively, than those of the parallel cultures that were performed under an excessive agitation speed (350 rpm) and aeration rate (1 vvm) to maintain sufficiently high DO levels throughout the entire fermentation period. These results suggest that high shear damage of the high-yielding strain due to an excessive agitation speed is the primary reason for the reduction of the AVM $B_{1a}$ biosynthetic capability of the producer. As for the cell growth, exponential growth patterns during the initial 3 days were observed in the fermentations of sufficient DO levels, whereas almost linear patterns of cell growth were observed in the other two cultures of DO limitation during the identical period, resulting in apparently lower amounts of DCW. These results led us to conclude that maintenance of optimum DO levels, but not too high to cause potential shear damage on the producer, was crucial not only for the cell growth, but also for the enhanced production of AVM $B_{1a}$ by the filamentous mycelial cells of Streptomyces avermitilis.

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.17-26
• /
• 2020

It is clear that monocrystalline Silicon (Si) ingots are the key raw material for semiconductors devices. In the present industries markets, most of monocrystalline Silicon (Si) ingots are made by Czochralski Process due to their advantages with low production cost and the big crystal diameters in comparison with other manufacturing process such as Float-Zone technique. However, the disadvantage of Czochralski Process is the presence of impurities such as oxygen or carbon from the quartz and graphite crucible which later will resulted in defects and then lowering the efficiency of Si wafer. The heat transfer plays an important role in the formation of Si ingots. However, the heat transfer generates convection in Si molten state which induces the defects in Si crystal. In this study, a crystal growth simulation software was used to optimize the Si crystal growth process. The furnace and system design were modified. The results showed the melt-crystal interface shape can affect the Si crystal growth rate and defect points. In this study, the defect points and desired interface shape were controlled by specific crystal growth rate condition.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1979년도 춘계학술대회
• /
• pp.115.2-115
• /
• 1979

By employing a two-stage continuous culture system, some of important physiological parameters involved in cellulase bicsynthesis have been evalua-ted with an ultimate objective of detigning an op-timally controlled tellulase process. Volumetric and specific cellulase productivities obtained were 90 IU/liter/hr and 8IU/g biomass/hr respectively. The maximum specific enzyme productivity observed was 14.8 IU/g hiomass/hr. The optimal dilution rate in the second stage which corresponded to the maximum enzyme productivity was 0.026-0.028 hr$^{-1}$ , and the specific growth rate in the second stage ihat suported maximum specific enzyme productivity was equal to orslightly less than zero. The maintenance coefficients deter-mined for oxygen and for carbon source are M$_{o}$=0.85mmmole/g biomass/hr and M$_{c}$=0.14 mmole hexose/g bio mass/hr respectively. The yield constants determined are; Y(x/o) =32.3g biomass/mole oxygen, Y (x/c) =1.1g bio-mass/g carbon or 0.44g biomass/g hexose, Y(x/n) = 19.6g biomass/g nitrogen for the enzyme produc-tion stage and 12.5g biomass/g nitrogen for the cell growth stage.e.e.

• 한국생산제조학회지
• /
• 제25권3호
• /
• pp.237-243
• /
• 2016

Recently, technologies that produce biofuels from microalgae are being studied worldwide. It is necessary to significantly reduce the production costs of biofuels from microalgae for economic reasons. In this study, the growth curve of the microalgae was obtained using the batch-culture method, and the specific growth rate was predicted using the regression method. Based on the culture conditions of the estimated specific growth rate, the turbidity of the microalgae in the flat panel photobioreactor (PBR) was measured. Furthermore, an on-off control scheme was applied to the flat panel PBR in order to culture the microalgae continuously on the basis of turbidity. The parameters of the on-off control system were displayed by LabView. The on-off scheme of peristaltic pump was controlled based on the turbidity in the PBR. In addition, the turbidity values of growth curves were compared and analyzed in the continuous culture process using the on-off controller.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.308-309
• /
• 2012

One of the critical issues in the growth of multijunction solar cell is the formation of a highly doped Esaki interband tunnel diode which interconnects unit cells of different energy band gap. Small electrical and optical losses are the requirements of such tunnel diodes [1]. To satisfy these requirements, tens of nanometer thick gallium arsenide (GaAs) can be a proper candidate due to its high carrier concentration in low energy band gap. To obtain highly doped GaAs in molecular beam epitaxy, the temperatures of Si Knudsen cell (K-cell) for n-type GaAs and Be K-cell for p-type GaAs were controlled during GaAs epitaxial growth, and the growth rate is set to 1.75 A/s. As a result, the doping concentration of p-type and n-type GaAs increased up to $4.7{\times}10^{19}cm^{-3}$ and $6.2{\times}10^{18}cm^{-3}$, respectively. However, the obtained n-type doping concentration is not sufficient to form a properly operating tunnel diode which requires a doping concentration close to $1.0{\times}10^{19}cm^{-3}$ [2]. To enhance the n-type doping concentration, n-doped GaAs samples were grown with a lower growth rate ranging from 0.318 to 1.123 A/s at a Si K-cell temperature of $1,180^{\circ}C$. As shown in Fig. 1, the n-type doping concentration was increased to $7.7{\times}10^{18}cm^{-3}$ when the growth rate was decreased to 0.318 A/s. The p-type doping concentration also increased to $4.1{\times}10^{19}cm^{-3}$ with the decrease of growth rate to 0.318 A/s. Additionally, bulk resistance was also decreased in both the grown samples. However, a transmission line measurement performed on the n-type GaAs sample grown at the rate of 0.318 A/s showed an increased specific contact resistance of $6.62{\times}10^{-4}{\Omega}{\cdot}cm^{-2}$. This high value of contact resistance is not suitable for forming contacts and interfaces. The increased resistance is attributed to the excessively incorporated dopant during low growth rate. Further studies need to be carried out to evaluate the effect of excess dopants on the operation of tunnel diode.

• KSBB Journal
• /
• 제9권1호
• /
• pp.8-15
• /
• 1994

재조합 효모를 이용한 hirudin 발효생산조건의 최적화 연구를 수행하였다. Hirudin 유전자는 GAL10 promoter와 MFal 분비신호, GAL7 terminator와 결합되어 있다. 재조합 효모의 성장속도와 hirudin 최종 농도를 증가시키기 위하여 최적의 배지조성과 배양조건을 결정하였다. 최적의 배지조성과 배양조건은 yeast extract 40g/$\ell$, casamino acid 5g/$\ell$, 포도당 20g/$\ell$, galactose 30g/$\ell$, DO 50%, 온도 $30^{\circ}C$였다. 이 조건으로 2.5$\ell$ 발효조에서 회분식배양을 수행한 결과 비성장속도는 $0.13hr^{-1}$, 최종 건조균체농도는 30g cell/$\ell$, 최종 hirudin 농도는 64mg/$\ell$로 나타났다.

• 한국해양바이오학회지
• /
• 제8권1호
• /
• pp.24-29
• /
• 2016

Microalgae are considered as superior biodiesel producers, because they could effectively produce high amount of lipid with fast growth rate. In this study, Chlorella vulgaris was exposed to various light wavelengths (${\lambda}_{max}$ 470 nm, ${\lambda}_{max}$ 525 nm, and ${\lambda}_{max}$ 660 nm) using light emitting diodes (LEDs) to examine effect of light quality on their growth and fatty acid production in 0.4-L bubble column photobioreactors. Fluorescent lamps were also used as polychromatic light sources (control). From the results, biomass productivity was varied by light wavelength from 0.05 g/L/day to 0.30 g/L/day. Maximum biomass productivity was obtained from red LED among tested ones. We also observed that contents of oleic acid and linolenic acid, which affect biodiesel properties, were significantly changed depending on supplied wavelength. These results indicated that production of algal biomass, and fatty acid content and productivity could be improved or controlled by supplying specific light wavelength.

• 원예과학기술지
• /
• 제33권5호
• /
• pp.633-637
• /
• 2015

Cucumber and paprika transplants were stored at 9, 12, 15, and $18^{\circ}C$ under dark conditions for 15 days and then grown in a greenhouse for 14 days after transplanting. To determine the effects of low storage temperature and long-term continuous darkness on the quality and vigour of transplants, we investigated the quality of transplants during storage and the growth of stored transplants after transplanting. In cucumber transplants, decreasing storage temperature reduced stem elongation and decrease in SPAD value. The quality of cucumber transplants stored at $9^{\circ}C$ was well preserved during storage, but they did not survive after transplanting due to chilling damage. Growth and development after transplanting were significantly greater when cucumber transplants were stored at $12^{\circ}C$. In paprika transplants, the quality of transplants did not significantly differ before and after storage. After transplanting, there was no significant difference in the survival rate and growth, but the number of flower buds was greater in the paprika transplants stored at lower temperatures (9 and $12^{\circ}C$). These results indicate that the responses of transplants to the conditions of low temperature and darkness differed between cucumber and paprika, and storage temperature in darkness must be controlled carefully considering species-specific responses to reduce quality deterioration during storage and improve the recovery of transplants after transplanting.