• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.985-992
• /
• 2005

Vehicle Stability Control (VSC) system prevents vehicle from spinning or drifting out mainly by braking intervention. Although a control threshold of conventional VSC is designed by vehicle characteristics and centered on average drivers, it can be a redundancy to expert drivers in critical driving conditions. In this study, a manual adaptation of VSC is investigated by changing the control threshold. A control threshold can be determined by phase plane analysis of side slip angle and angular velocity which is established with various vehicle speeds and steering angles. Since vehicle side slip angle is impossible to be obtained by commercially available sensors, a side slip angle is designed and evaluated with test results. By using the estimated value, phase plane analysis is applied to determine control threshold. To evaluate an effect of control threshold, we applied a 23-DOF vehicle nonlinear model with a vehicle planar motion model based sliding controller. Controller gains are tuned as the control threshold changed. A VSC with various control thresholds makes VSC more flexible with respect to individual driver characteristics.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.195-201
• /
• 2005

In conventional Vehicle Stability Control (VSC) System, a control threshold is designed by average driver characteristics. Despite the stabilizing effort, VSC causes redundancy to an expert driver. An advanced VSC which has flexibility on its control property is proposed in this study. By using lateral velocity estimator, a control threshold is determined on side slip angle and angular velocity phase plane. Vehicle planar motion model based sliding controller is modified with respect to various control thresholds. The performance of the proposed VSC algorithm has been investigated by human-in-the-loop simulation using a vehicle simulator. The simulation results show that the control threshold has to be determined with respect to the driver steering characteristics. A VSC with variable control thresholds would provide an improvement compared to a VSC with a constant threshold.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.396-402
• /
• 2001

In various applications of queueing systems, admission control is often employed. It is known that the threshold-type of admission control is optimal in many practical applications despite its simplicity. However, determining the optimal threshold value is hard in general, because analytical expressions for the stationary queue length distributions are not easily available in most queueing systems. In this paper, to quickly determine the optimal threshold value under threshold-type admission control, we develop a concurrent simulation technique, which can save large amount of CPU time required in simulation, compared to the standard simulation procedure.

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.568-572
• /
• 2009

We present a ternary microfluidic multiplexer unit, capable to address three flow channels using a pair of control lines with two different threshold pressure valves. The previous binary multiplexer unit addresses only two flow channels using a pair of control line with identical threshold pressure valves, thus addressing $2^{n/2}$ flow channels using n control lines. The present ternary multiplexer addressing three flow channels using a pair of control lines, however, is capable to address $3^{n/2}$ flow channels using n control lines with two different threshold pressure valves. In the experimental study, we characterized the threshold pressure and the response time of the valves used in the ternary multiplexer. From the experimental observation, we also verified that the present ternary multiplexer unit could be operated by two equivalent valve operating conditions: the different static pressures and dynamic pressures at different duty ratio. And then, $3{\times}3$ well array stacking ternary multiplexers in serial is addressed in cross and plus patterns, thus demonstrating the individual flow channel addressing capability of the ternary multiplexer. Thus, the present ternary multiplexer reduces the number of control lines for addressing flow channels, achieving the high well control efficiency required for simple and compact microfluidic systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1165-1167
• /
• 2007

Delta doping method can separate the threshold voltage control region from the charge transport region in a-Si TFT, whereby the threshold voltage of a TFT could be modified. Threshold voltage could be changed by delta doping, while field effect mobility was estimated to be 80% of that of standard TFT.

• Journal of information and communication convergence engineering
• /
• 제12권2호
• /
• pp.97-103
• /
• 2014

In spectrum sensing, there is a tradeoff between the probability of missed detection and the probability of a false alarm according to the value of the sensing threshold. Therefore, it is important to determine the sensing threshold suitable to the environment of cognitive radio networks. In this study, we consider a cognitive radio-based ad hoc network where secondary users directly communicate by using the same frequency band as the primary system and control their transmit power on the basis of the distance between them. First, we investigate a condition in which the primary and the secondary users can share the same frequency band without harmful interference from each other, and then, propose an algorithm that controls the sensing threshold dynamically on the basis of the transmit power of the secondary user. The analysis and simulation results show that the proposed sensing threshold control algorithm has low probabilities of both missed detection and a false alarm and thus, enables optimized spectrum sharing between the primary and the secondary systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1292-1294
• /
• 2007

In this report, the effects of chemical surface treatments of ITO gate electrodes of OTFTs have been studied by using acid and base solutions. As a result, it is observed that the threshold voltage of OTFTs could be influenced and modified by the surface treatments. The device with an ITO gate electrode surface-treated by a base solution shows the lowest threshold voltage of -7.66 V, while the threshold voltages are about -13.51 V and -15.3 V for the devices without a surface treatment and with the acid solution treatment, respectively. It is thought that the work function of ITO electrode surface might be affected by the surface treatments, thereby influencing the threshold voltage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권11호
• /
• pp.2597-2615
• /
• 2013

This paper proposes a dynamic downlink load control scheme that jointly employs dynamic load threshold management and virtual coverage management schemes to reduce the degree of performance degradation due to traffic overload in two-tier femtocell networks. With the proposed scheme, the downlink load in a serving macrocell is controlled with a load threshold which is adjusted dynamically depending on the varying downlink load conditions of neighboring macrocells. In addition, traffic overloading is alleviated by virtually adjusting the coverage of the overloaded serving macrocell, based on the adjusted load threshold of the serving macrocell. Simulation results show that the proposed scheme improves the performance of two-tier femtocell networks in terms of the outage probability and sum throughput. This improvement is significantly increased with appropriate values of load thresholds and with an intermediate-level adjustment of the virtual coverage area (i.e., handover hysteresis margin: HOM). Furthermore, the proposed scheme outperforms both a previously proposed load control scheme with a static load threshold and the LTE system without a HOM adjustment.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.126-134
• /
• 2005

This paper proposes a selectively cumulative sum(S-CUSUM) control chart for detecting shifts in the process mean. The basic idea of the S-CUSUM chart is to accumulate previous samples selectively in order to increase the sensitivity. The S-CUSUM chart employs a threshold limit to determine whether to accumulate previous samples or not. Consecutive samples with control statistics out of the threshold limit are to be accumulated to calculate a standardized control statistic. If the control statistic falls within the threshold limit, only the next sample is to be used. During the whole sampling process, the S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L -consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain approach is employed to describe the S-CUSUM sampling process. Formulae for the steady state probabilities and the Average Run Length(ARL) during an in-control state are derived in closed forms. Some properties useful for designing statistical parameters are also derived and a statistical design procedure for the S-CUSUM chart is proposed. Comparative studies show that the proposed S-CUSUM chart is uniformly superior to the CUSUM chart or the Exponentially Weighted Moving Average(EWMA) chart with respect to the ARL performance.

• 한국통신학회논문지
• /
• 제19권8호
• /
• pp.1475-1484
• /
• 1994

본 논문은 2중 문턱값을 갖는 우선순위 스케쥴링 알고리즘과 버퍼의 히스테리시스 특성을 이용한 트레픽 제어기법을 제안하였다. 2중 문턱값을 갖는 우선순위 스케쥴링 알고리즘은 HOL과 QLT를 적용하였다. 버퍼의 히스테리시스 특성을 이용한 트래픽 제어기법으로는 히스테리시스성 QLT 알고리즘과 히스테리시스성 트래픽 유입제어를 제시하였다. 2중 문턱값을 갖는 동적 우선순위 스케쥴링 알고리즘이 기존의 QLT 알고리즘보다, 셀손실율과 평균지연에 있어서, 우수함을 컴퓨터 시뮬레이션을 통해 고찰하였다. 또 히스테리시스성 QTL 알고리즘과 트래픽 유입량 제어기법은 단일 문턱값을 이용한 방식보다 각각 효율이 개선됨을 알 수 있었다.