• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.317-327
• /
• 1993

This study was carried out to develop a microcomputer-based data acquisition system and software for analysis of engine vibration. Due to this development of system and software, studies on the vibration of engine was able to conduct efficiently. From the display of color monitor, the outputs of test were compared and analysed on zero-base monitoring. The results obtained are summarized as follows : 1. Data acquisition system in microcomputer was designed and programmed and operated accurately. 2. The results of test were easily compared in monitoring of zero-base at color monitor. 3. The system and program developed was able to control the measuring intervals, number of channels, and number of data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.532-534
• /
• 2004

The advancement of electronics and telecommunication technologies has forced the risk management system for underground metallic structures to evolve into the remote monitoring and control system. Especially, facilities such as gas pipelines, oil pipelines and water distribution lines might make hazardous effect on human safety without continuous monitoring and control. As a result, pipeline engineers have applied cathodic protection system to prevent the degradation of their facilities by corrosion and carried out a periodic monitoring of the pipe-to-soil (P/S) potentials at numberous test boxes along their pipelines. The latter action on a road in downtowns, however, is so much dangerous that the inspectors should be ready to suffer the threatening of their lives and maintenance. In order to minimize these social costs and hazards, a stand-alone type corrosion monitoring equipment which can be installed in test box, store the P/S data for given Belied and send the data by wired/wireless telecommunications is under development. In order to obtain the exact P/S data, however, a reference electrode should be located as close to the pipeline as possible. Actually, the measured potential by a conventional portable reference electrode contain inevitably an IR drop portion caused by the current flow from the cathodic protection rectifier or the subway railroad. To minimize this error, it is recommended that the reference electrode should be buried within 10 cm from the pipeline. In this paper, we describe the design parameters for fabricating the permanent type reference electrode and the characteristics of the developed reference electrode.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.39-44
• /
• 2002

As laser cutting process is widely used in industry, an automated on-line process control system has become very important. In this paper, development of a laser cutting monitoring system, which is regarded as the fundamental step toward automation of the process, is presented. Acoustic emission and an artificial neural network were used for the monitoring system. With given process Parameters including laser power and scanning speed the system can predict the suitability of laser beam for the cutting or a stainless steel (STS304) plate.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1221-1224
• /
• 2004

This paper presents the programmable logic controller (PLC) networking development for communication with the mobile phone. The proposed technique is suitable for remote sensing control systems, which can display the operation status and monitoring fault diagnosis of a system. The system operation is based on the use of personal computer (PC) to logically analyze data from PLC, and existing internet protocol for sending information messages to mobile phones.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.18-25
• /
• 1996

In this study, we have developed the stereolithography system that supports the development of a products. This paper presents the development of the stereolithography system. The system is composed of hardware, software and control part. The software converts a STL file to NC data and displays the monitoring figure in control part. The hardware part deals with structure of machine. The most important theme in this paper is LG-SLCAM software. This software can generate NC data and scanning condition data from a STL file semiautimatically. On the basis of three diensional shapes, it makes data for support structure from STL file. The effectiveness of using out stereolithography system is confirmed by processes of good development.

• 항공우주기술
• /
• 제5권2호
• /
• pp.188-194
• /
• 2006

본 논문은 냉가스 추력기 시스템의 제어기로 사용되는 EM용 TCU(Thruster Control Unit)와 점검 시스템 개발에 관한 것이다. TCU는 추력기 시스템의 압력 및 온도를 모니터링하여 통신을 통해 이를 TLM(Telemet) 및 지상 제어 콘솔에 전달하는 역할을 수행한다. 이를 위해 CPU/통신보드는 MIL-STD-1553B 통신, RS422 통신, Data 입출력 및 처리 그리고 EEPROM 프로그램 로딩 기능을 수행한다. Intel 80386DX Microprocessor를 기반으로 설계하였으며 프로그램 저장 및 실행을 위해 256kbytes의 EEPROM과 256kbytes의 SRAM을 적용하였다. 또한 EEPROM 프로그램 로딩을 위해 인터페이스 회로 및 냉가스 추력기 시스템을 모사할 수 있는 점검 시스템을 개발하였다.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1678-1683
• /
• 2001

The mobility of tracked vehicles is mainly influenced by the interaction between tracks and soil, so that the characteristics of their interactions are quite important fur the tracked vehicle study. In particular, the track tension is closely related to the maneuverability of tracked vehicles and the durability of tracks and suspension systems. In order to minimize the excessive load on the tracks and to prevent the peal-off of tracks from the road-wheels, the Dynamic Track Tensioning System (DTTS) which maintains the optimum track tension throughout the maneuver is required. It consists of track tension monitoring system, track tension controller and hydraulic system. In this paper, a dynamic track tensioning system is developed for tracked vehicles which are subject to various maneuvering tasks. The track tension is estimated based on the idler assembly model. Using the monitored track tension and con sidering the highly nonlinear hydraulic units, fuzzy logic controllers are designed in order to control the track tension. The track tensioning performance of the proposed DTTS is verified through the simulation of the Multi -body Dynamics tool.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 2004

In recent die industry, web-based production control system is applied widely because of the improvement of IT technology. In result, many researches are published about remote monitoring at a long distance. The target of this study is to develop Die Discrimination System using web-based vision, and CAD API when client discriminates die in process at a long distance. Special feature of this system is to use 2D vision image and to match with DB. We can get discrimination result enough to want with short time and a little low precision in web-monitoring by development of this system.

• 한국컴퓨터정보학회논문지
• /
• 제13권5호
• /
• pp.1-10
• /
• 2008

본 논문은 다양한 환경에서 자동화장비를 제어하고 감시하기 위하여 OPC 기반의 통합형 HMI 시스템 개발에 대하여 논한다. 다양한 프로세스제어 분야의 통신 표준 메커니즘을 위해 제안된 OPC표준에 따라 임베디드 OPC 서버를 구현하고, OPC서버의 데이터를 로컬 장비와 인트라넷 클라이언트, Web 페이지 등 다양한 HMI 환경에 접속할 수 있도록 인터페이스 방법을 제안한다. 본 논문의 방법을 다양한 제어 시스템에 적용함으로서 이기종간의 연결 및 데이터 상호교환 뿐만 아니라 네트워크상의 원격 제어 및 웹 모니터링도 가능하기 때문에 유비쿼터스 환경의 HMI 시스템 구현에 기여할 것으로 기대된다.

• 공학교육연구
• /
• 제20권4호
• /
• pp.61-66
• /
• 2017

Automatic flow control system composed by hardware and software was designed and fabricated to be used as teaching tool of feedback control theory in university experimental class. This system includes hardwares like data acquisition board, flow measuring device, transmitters, and the pneumatic valve, and software like LabView program for the monitoring and control of flow rates. The system was designed as the student can see the control effect of not only set point but also disturbance changes. Also the LabView program was composed for the calculation of controller parameters of both Ziegler-Nichols and Cohen-Coon tuning. The students can apply both tuning constants and compare the control performances. This system will provide the easy way for the students to understand the function and specification of control hardwares, and to raise the programing ability of control software.