• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.69-74
• /
• 2009

Monitoring system is an absolutely-required system for assessing a performance and fatigue load of the wind turbine in an on-shore wind energy experimental research complex. It was implemented for the purpose of monitoring the wind information measured from a meteorological tower at the monitoring house, and of utilizing the measured data(fatigue data and electric analyzing data of wind turbine)for the performance assessment, by using the LabVIEW program. Then, by adding the performance assessment-related data acquired from the wind turbine during the performance assessment and the data recorder for synchronizing the data of meteorological tower, the system(BusDAQ) was implemented. Because it transmitted the data by converting the output 'RS-232' of data logger which measures the wind condition into CAN protocol, the data error rate was minimized. Also, This paper is introduced to make the best use of the developed monitoring system and to explain about construct of the system and detailed data communication of its system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.564-567
• /
• 2005

For the application of monitoring system of the machine tool to industry, the requirements such as high reliability and low cost need to be satisfied. In this study, a reliable but inexpensive monitoring method for machine tool is introduced. To improve the monitoring reliability, several kinds of information related to machining and operation are selected; real-time video clip from USB camera, operation data and signal from CNC and feed motor torque. Especially, to improve the quality of real-time video clip, a camera housing is developed, it can significantly reduce the vibration effect and prevent from coolant and chip. The collected information are transferred to the monitoring terminals in remote sites using OPC and TCP/IP protocol over Ethernet, which give us convenience of development and interoperability.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권11호
• /
• pp.521-527
• /
• 2002

The Hemodialysis system is the device for the patients who have suffered from end stage renal failure as the kidney which removes the waste products in a human body. The existing hemodialysis is based on a 8-bit micro-controller and it is not a touch-screen type but a manual type. This paper is focused on hemodialysis system based on high control and expension embedded system. The whole system consists of main control unit and sub control unit(dialysis control unit, blood control unit, monitoring control unit, networking unit). The dialysis control unit, blood control unit, monitoring control unit are processed by 3 microcontrollers and network unit is for monitoring a renal failure patient's condition. For the evaluation of the system performance, the saline was pured into blood unit and then water removal rate, conductivity and temperature of hemodialysis liquid were measured 10 times in an each state suing the UF pump in the fluid unit varing the quantity of saline to 1000cc, 2000cc, 3000cc and 4000cc. As a result, the rates of water removal are 98.6% in condition of 000cc saline, 96.9% in 2000cc, 98.9% in 3000cc and 98.3% in 4000cc. The conductivities of hemodialysis liquid are 99.6% in the first to third condition and 99.7% in the forth condition. The temperatures of hemodialysis liquid are 99.8% in the first to third condition and 99.6% in th forth condition.

• 동력기계공학회지
• /
• 제10권2호
• /
• pp.104-110
• /
• 2006

Corrosion has been around for all of recorded history. Cathodic protection is the electrical solution to the corrosion problem. Corrosion is not exactly a new topic. It has been around since the beginning of time. Corrosion is simply the loss of material resulting from current leaving a metal, following through a medium, and returning to the metal at a different point. Corrosion takes many forms and has various names, such as oxidation, rust, chemical, and bacteria action. Regardless of the agent, all corrosion is the result of electrical current flow. Various methods are used to treat corrosion or to try to prevent ti. Some of these include chemical treatment. coatings, and electrical current. Especially, proper impressed current can stop corrosive action on the protected surface. In this article, we introduce the Impressed Current Cathodic Protection (ICCP) Control and monitoring system developed by ourselves. The ICCP system is composed of a power supply, anode, reference electrode and controller. The main issue is to control the current flow on the desired value such that it is possible to force a metal to be more negative(cathodic) than the natural state. From the this process, we can achieve the cathodic protection. Of course, in the developed system, the necessary functions are possessed, such as remote control, monitoring of system fault detection etc. Some experimental results show the system performance and usefulness.

• 현장농수산연구지
• /
• 제18권1호
• /
• pp.101-112
• /
• 2016

본 연구는 원예시설의 원격제어에 대한 불안감을 해소하고 신뢰성을 확보하기 위하여 감시 및 제어 기능과 안정성을 높인 ICT기반 온실제어시스템을 개발하고 비닐하우스에 적용하여 그 성능을 검증하고자 하였다. 온실 환경 제어 시스템은 온실의 환경 정보를 취득하는 센서와 센서G/W로 구성된 센서부와 온실의 환경을 제어하는 PLC, 이더넷 통신을 통해 환경 정보 데이터와 구동부의 작동상태를 수집하고 외부 서버와 연계되어 환경정보와 제어정보를 전달하는 로컬서버, 천.측창, 커튼 등을 작동시키는 구동부, 재배작물과 작동부 감시를 위한 카메라 등으로 구성하였다. 온실 환경 제어 시스템은 현장제어와 원격 제어 간의 충돌을 방지하기 위해 원격/로컬 상태 구분을 위한 선택 스위치와 원격제어에 따른 안전성을 확보하기 위한 안전장치를 마련하였다. 즉, 각 내부장치를 동작시키는 전자개폐기, 조작 스위치로부터 상태를 수집하며, 모터 등 과부하 발생 시 과부하계전기의 TRIP신호를 감지하여 운영자의 컴퓨터와 스마트폰으로 경보가 보내지도록 구현하였다. 소프트웨어는 웹브라우저를 이용한 HMI(Human Machine Interface) 구현으로 관리자 페이지를 통해 다수의 브라우저에서도 지원 가능하도록 하였다. 또한, 모바일 웹방식을 도입하여 안드로이드, 아이폰 등 운영체제와 상관없이 구동할 수 있도록 구현하였다. 제어화면은 운영자가 한눈에 알아보기 쉽게 온실의 모형과 부대 장치와 작동기기를 이미지화하여 동작 상태를 표시하도록 하였으며, 작동 버튼을 클릭하여 수동조작도 가능하도록 구현하였다. 온실 환경 제어 시스템 성능시험결과 천창, 측창, 수평커튼, 측면커튼은 작동 조건에 따라 모두 성공적으로 작동함을 확인하였다. 또한, 소프트웨어의 데이터 수집 및 디스플레이 상태, 이벤트 출력, 영상모니터링 등 계측 및 제어성능 모두 양호하게 나타났다.

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.23-43
• /
• 2017

Purpose: As application-specific wireless sensor networks are gaining popularity, this paper discusses the development and field performance of the GHAN, a greenhouse area network system to monitor, control, and access greenhouse microenvironments. GHAN, which is an upgraded system, has many new functions. It is an intelligent wireless sensor and actuator network (WSAN) system for next-generation greenhouses, which enhances the state of the art of greenhouse automation systems and helps growers by providing them valuable information not available otherwise. Apart from providing online spatial and temporal monitoring of the greenhouse microclimate, GHAN has a modified vapor pressure deficit (VPD) fuzzy controller with an adaptive-selective mechanism that provides better control of the greenhouse crop VPD with energy optimization. Using the latest soil-matrix potential sensors, the GHAN system also ascertains when, where, and how much to irrigate and spatially manages the irrigation schedule within the greenhouse grids. Further, given the need to understand the microclimate control dynamics of a greenhouse during the crop season or a specific time, a statistical assessment tool to estimate the degree of optimality and spatial variability is proposed and implemented. Methods: Apart from the development work, the system was field-tested in a commercial greenhouse situated in the region of Punjab, India, under different outside weather conditions for a long period of time. Conclusions: Day results of the greenhouse microclimate control dynamics were recorded and analyzed, and they proved the successful operation of the system in keeping the greenhouse climate optimal and uniform most of the time, with high control performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1382-1384
• /
• 2002

The flooded type battery is used for solar lighting system. Because the characteristic of flooded type battery is the short life time, the maintenance cost is high. So the using flooded type battery in this system is inappropriate. The valve regulated lead acid batter.(VRLA) is the maintenance free and cycle service purpose. This paper presents the development of control system and monitoring system to applied VRLA battery for maintenance free and long life time in system.

• 한국컴퓨터정보학회논문지
• /
• 제11권4호
• /
• pp.299-304
• /
• 2006

산업현장의 기계장치나 실내 외 그리고 해양 등과 같은 주위 환경의 데이터를 원거리의 중앙 컴퓨터에 전송하여 그 상태를 확인하여 해석하고, 해석된 데이터를 바탕으로 이상 유무 등을 판별하여 시스템의 최적 동작을 위한 시스템 명령 등을 Network나 유 무선 통신을 이용하여 전달하는 온-라인 모니터링 시스템이다. 본 연구는 온-라인 모니터링 시스템을 개발하기 위하여 염산 수조의 온도를 원격지의 중앙 컴퓨터에서 제어하는 시스템으로써 모니터링부 무선송신부, 온도콘트롤부로 이루어진 실험 장치를 구성하였다. 본 시스템을 응용하면 재난 재해방지 시스템, 경보 시스템과 같은 USN(Ubiquitous Sensor Network)시스템에 적용이 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.76-78
• /
• 2000

The previous MCC's have the demerits of high cost and much manhour for rework because they are impossible for the standardization of products and have many manual connections. The customers require the products which can operate in connection with SCADA system by digitalizing the functions of the current MCC's and are systematized with capability of remote control. To solve these disadvantages and requirements, we developed the Electronic Motor Control System according to starting type for applying to fields based on this. This system has the various functions such as protection, measurement, and communication. Using these functions, it can monitor motor status through communication with the upper system and define the circuit for lower connection cost according to starting type and shorter manufacture period by program. The development of this product results in establishment of competitive structure with domestic competition and perfect automatic monitoring through linkage with SCADA system. In addition, it provides the comparable dominancy of receiving on orders in switch gear and adaptability to change of MCC market in Japan and Europe.

• 시스템엔지니어링학술지
• /
• 제10권2호
• /
• pp.43-50
• /
• 2014

The Centralized Traffic Control(CTC) System of Urban Railway is an element(subsystem) of the Urban Railway system to aim safety operation and efficient management of rolling stock in accordance with a train scheduling program in train operation ways. That's why the CTC System must be developed considering systematic and safety-guaranteed methods such as RAMS(Reliability, Availability, Maintainability, and Safety) refereed to IEC standards. The CTC System is consists of rolling stock, signaling, power supply, communication, and mechanical equipment and preforms control and remote monitoring functions. The technical activities considering safety process are very important at such an early stage of development in a railway project. This paper introduces RAMS activities and an independent safety assessment by $3^{rd}$ Party focused on a safety applied to a development of the CTC system of Urban Railway and proposes the experiences as well practices.