• 한국산림과학회지
• /
• 제20권1호
• /
• pp.51-60
• /
• 1973

The trend and achievments of soil erosion control research in Japan were investigated through observation tours and reference work and following facts were found to be important aspects which should be considered in the soil erosion control research program in Korea. Experiments on forest and water relations, and ground water phenomena at the water source zone in Tokyo University. Studies on land-slides and erosion control dam in Kyoto University. Studies on mud-flow and snow avalanches in Hokkaido University. Studies on sanddune fixation and disaster damage prevention forests in Kyushu University. Studies on forest denudations in Nagoya University. Studies on Greening-works and soil erosion prevention chemicals in Tokyo Agriculture University. Training on planning of erosion control works and prevention of disaster damages in Forest Research Institute. Experiments on soil erosion phenomena and infiltration in Tohoku Branch, FRI. Experiments on erosion and surface stratum failure of steep slopes and their prevention methods in Railway Technical Research Institute.

• Journal of Periodontal and Implant Science
• /
• 제30권2호
• /
• pp.443-455
• /
• 2000

The aim of periodontal therapy is a removal of a bacterial plaque butthe instrumentation for plaque control has two nature : removal of a bacterial plaque and increase of surface roughness. Complication of instrumentation is enable to damage to the root surface and artificial crown. Therefore this study was conducted to evaluate the effects of repeated instrumentation on the marginal portion of artificial crown. Fifteen proximal surfaces of ten extracted periodontally diseased maxillary first molars were used. The finish line was placed on the root surface, and then the crown was casted and cemented in usual manner. Three kinds of instruments: hand curet, ultrasonic scaler, and ultrasonic curet were used. After instrumentation, final polishing was done with rubber cup and pumice. And surface changes were evaluated by stereomicroscope and scannig probe microscope. Roughness was increased after instrumentation in all groups, and was decreased after polishing except ultrasonic scaler group. Roughness in the ultrasonic scaler group was lower than others, and roughness after polishing in the hand curet group was lower than others. These results indicate that polishing procedure is recommended, because periodontalinstruments increase the surface roughness and induce the irreversible damage to the marginal portion.

• Geomechanics and Engineering
• /
• 제32권4호
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

• 한국치위생학회지
• /
• 제17권4호
• /
• pp.657-667
• /
• 2017

Objectives: The aim of this study was to evaluate the potential of dental erosion by three different types of commercial fermented milk on the enamel surface of bovine teeth. Methods: Forty bovine teeth (four groups of 10) were immersed in fermented milk (experimental groups: liquid type, condense-stirred type and condense-drink type) or mineral water (control group) for 1, 3, 5, 10, 15, 30, 60, 90 and 120 minutes. Enamel surface microhardness was measured before and after treatment with a microhardness tester, and Scanning Electron Microscope (SEM) was used to assess the enamel surface morphology. Results:Changes in enamel surface microhardness (before-after treatment; ${\Delta}VHN$) were significantly different among the four groups (p<0.05). ${\Delta}VHN$ was highest in the liquid type group, followed by the condense-stirred type, condense-drink type, and control groups. The ${\Delta}VHNs$ of three types of fermented milk groups were higher than that of the control group (p<0.05). The liquid type group showed higher ${\Delta}VHN$ than the other two types of condense fermented milk groups (p<0.05). However, there was no significant difference in ${\Delta}VHN$ between the two types of condense fermented milk (p>0.05). The results of SEM observation have shown the most severe surface damage in bovine teeth immersed in the liquid type of fermented milk. Conclusions: In this study, it appears that liquid type fermented milk causes greater development of dental erosion. The physical properties and pH of fermented milk types must be considered for prevention of dental erosion associated with ingestion of fermented milk.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.519-522
• /
• 2008

As industry of a semiconductor and LCD industry have been rapidly growing, precision technologies of machining such as etching and 3D measurement are required. Stylus has been important measuring method in traditional manufacturing process. However, its disadvantages are low measuring speed and damage possibility at contacting point. To overcome mentioned disadvantage, non-contacting measurement method is needed such as PMP(Phase Measuring Profilometry), WSI(white scanning interferometer) and Confocal Profilometry. Among above 3 well-known methods, WSI started to be applied to FPD(flat panel display) manufacturing process. Even though it overcomes 21t ambiguity of PMP method and can measure objects which has specular surface, the measuring speed and vibration coming from manufacturing machine are one of main issue to apply full automatic total inspection. In this study, We develop high speed WSI system and algorithm to reduce unknown noise. The developing WSI and algorithm are implemented to measure 3D surface of wafer. Experimental results revealed that the proposed system and algorithm are able to measure 3D surface profile of wafer with a good precision and high speed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.97.4-97
• /
• 2001

Recently, TFT LCD (thin film transistor liquid crystal display) manufacturing industry is more concerned with the ways of cleaning large TFT LCD´s with high pixed density than ever Ultrasonic cleaners with high frequencies like 1MHz (megasonic cleaners) are effective in removing very small particles without causing mechanical damage to the surface. In this study a megasonic cleaner for TFT LCD manufacturing process is developed and the performance is evaluated through experiments. The experimental results show that the developed magasonic cleaners is effective in removing very small particle from the LCD panel.

• International Journal of Railway
• /
• 제2권1호
• /
• pp.18-21
• /
• 2009

The basis of modem risk-based safety management is to focus on what might happen and ensure it is designed out of the system by robust hazard identification and risk analysis. However, in the real world things go wrong and it is essential to be prepared for the worst so that the response can minimise harm and loss of property and damage to the environment. Whilst some hazard mitigation measures are aimed at preventing incidents, others are venting escalation. The results of the tests concluded that the most effective means by the control room, both with and without, local station staff assistance using directive public address announcements and CCTV surveillance.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 후기공동학술대회 논문집
• /
• pp.61-61
• /
• 2011

Cavitation phenomena during the injection process of the conventional fuel injection pump for a medium-speed diesel engine can cause surface damage with material removal or round-off on the plunger and barrel port and may shorten their expected life time. An experiment of flow visualization was carried out to investigate the main cause of these cavitation damages and find the prevention method. Experimental results of flow visualization show that these damages are mainly affected by fountain-like cavitation and jet-type cavitation generated before and after the end of fuel delivery process and therefore the prevention method was designed to control these cavitation flows. From the visualization and endurance test, it was proved that this method can effectively prevent cavitation damages by controlling cavitation flows.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.264-266
• /
• 2005

Manufacture of OLED device used thermal evaporation method. However thermal evaporation method has many defect as thermal damage of substrate, difficult of dopant rate control and low utilization of organic materials. so we suggest PLD(Pulsed Laser Deposition) method that solution of these problems. PLD method has many advantage as without thermal damage, easy indicate of deposition rate per one pulse and good utilization of organic materials. In this paper we apply the PLD method for manufacture of device so we present high efficiency device manufacture using PLD method that has good deposition uniformity, surface rough and deposition rate.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.79-92
• /
• 2015

In this study, free vibration analyses of symmetric laminated cantilever and simply supported damaged composite beams are investigated by using finite element method (FEM). Free vibration responses of damaged beams are examined using Euler Bernoulli beam and classical lamination theories. A computer code is developed by using MATLAB software to determine the natural frequencies of a damaged beam. The local damage zone is assumed to be on the surface lamina of the beam by broken fibers after impact. The damaged zone is modeled as a unidirectional discontinuous lamina with $0^{\circ}$ orientations in this study. Fiber volume fraction ($v_f$), fiber aspect ratio ($L_f/d_f$), damage length ($L_D$) and its location (${\lambda}/L$), fiber orientation and stacking sequence parameters effects on natural frequencies are investigated. These parameters are affected the natural frequency values significantly.