• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.258-264
• /
• 2003

Requirement engineering is being highly required for developing a new system nowadays because systems become more and more complex. System engineers require clear and distinct user requirement to avoid mistakes taking placing and mitigate the risks such over cost, schedule delay, and performance degradation during system engineering activities. The exact requirement elicitation make it possible to develop a systems to meet users need. In this paper, we presented a process and methodology to develop requirement for application to Automatic Train Control System. In the methodology and process presentation. we presented a key words to elicit requirement and showed how to analyse and validate the given requirement for ATC system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1161-1168
• /
• 2016

Battery energy storage system(BESS) attract the attention of the power system operators with its fast response to a disturbance in spite of its limited energy capacity. This paper proposes the operating method of BESS for following the Automatic Generation Control(AGC) frequency control which is centrally distributed by a system operator. As BESS needs to just meet the control requirement from the system operator, it should be able to properly manage the state of charge(SOC) of BESS to be available to control signal. For doing these, the proposed method distributes the control requirement to available batteries in proportion to its SOC. In addition, unavailable batteries are controlled to recover the SOC to an appropriate range, and the recovering power is supplied by available batteries meeting the control requirement. Moreover, the proposed method manages the efficiency of power conversion system (PCS) by limiting the number of PCS to be assigned for the low control requirement. Finally, the case studies are carried out to verify the effectiveness of proposed strategy.

• Asia pacific journal of information systems
• /
• v.12 no.4
• /
• pp.101-120
• /
• 2002

Risk management or risk-based approach of software project management was developed to explain the effects of requirement uncertainty, control standardization, interactions on software quality. Based on a prior theory, five hypotheses were derived and empirically tested using a survey design. Data from 117 members in 3 SI companies support for the path model, and three of five hypotheses. The results showed that decreases in requirement uncertainty and increases in control standardization were directly associated with increases in the interactions between user and project teams, which, in turn, led to increases software quality. The findings suggested that the direct effect on software quality is primarily due to the interactions between user and project teams, rather than requirement uncertainty and control standardization.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.71-79
• /
• 2014

This paper discusses a method for the determination of frequency control reserve requirement with consideration of the interaction between ex-ante planning and real-time balancing. In proposed method, we consider the fact that the delivered energy for tertiary control reserve is determined based on required capacity for secondary control reserve and the expected amount of load errors. Uncertain load errors are derived by Brownian motion, an optimization method is suggested using a stochastic programming. In a short, we propose an interactive dependent method for determining secondary control reserve requirement based on the principle that it satisfies to minimize the total cost. As a result, this paper provides will analyze for an example model to demonstrate the capabilities of the method.

• Korean Journal of Agricultural Science
• /
• v.45 no.1
• /
• pp.74-83
• /
• 2018

Four early-fattening Hanwoo steers weighing $247{\pm}13.5kg$ were used within a $4{\times}4$ Latin square design to establish a nutrient requirement for maintenance and to investigate nutritional changes in the steers under heat stress condition. The steers were fed four different energy level diets: 100% (control) and 100%, 115% and 130% of total digestible nutrients (TDN) requirement of the early-fattening Hanwoo steers for maintenance based on the Korean Feeding Standard for Hanwoo. The steers in the control were housed with no stress (temperature $24^{\circ}C$ and humidity 60%), whereas the steers in the other groups were under heat stress (temperature $30^{\circ}C$ and humidity 70%). True digestibilities of dry matter (DM) and other nutrients were not significantly (p > 0.05) affected by heat stress (i.e., control vs T100). This may be the result of a lower DM intake than that of the Korean feeding standard due to the establishment of the nutrients requirement under heat stress. Heat stress and different energy intake levels did not affect the blood metabolite concentrations. Average daily gain (ADG) for T100 (-69.6 g) was lower than that of the control (-44.6 g, numerically), T115 (44.6 g, p < 0.05) and T130 (83.3 g, p < 0.05), respectively. Based on the ADG and TDN intake, the equation (Y = 0.1814X + 111.5) for the TDN requirement of the early fattening Hanwoo steers for maintenance was calculated, indicating that 11.5% of TDN requirement for maintenance under heat stress may be additionally supplied.

• Journal of Nutrition and Health
• /
• v.39 no.7
• /
• pp.641-648
• /
• 2006

This study was designed to evaluate the effect of the individual nutrition education for type 2 diabetes who participate the diabetes buffet. The subjects were 66 patients and divided into education (n=34) and control groups (n=32). The mean age of education and control groups were 59.8 and 56.6 years old, respectively. There were no differences in age and body mass index (BMI) between two groups. Initial glycosylated hemoglobin (HbA1c), post prandial plasma glucose (PP2), total plasma cholesterol, and blood pressure were not different between two groups. But fasting blood sugar (FBS) was higher in education group than in control group. On completion of the study, the education group showed significant decreases in body weight, BMI, FBS and PP2, however, the control group showed no changes in body weight, BMI and PP2, and showed a significant increase in FBS. Initial calorie and protein intakes of the education group did not meet the prescribed amount, however, mineral and vitamin intakes were higher than estimated average requirement (EAR). By the end of study, calorie and protein intakes were significantly increased to meet the prescription. In order to evaluate the effect of diet education, awareness of calorie requirement was used as an index of understanding diet prescription. The degree of awareness of calorie requirement was dependent on age: younger patients showed higher awareness than older subjects. The subject who showed better understanding of diet prescription showed lower levels of HbA1c, FBS, and PP2 at the end of the experiment period. The results of this study clearly show that individual diabetes diet education is effective to make the patient understand their diet prescription, and is effective to control body weight and blood sugar level. Awareness of calorie requirement could be used as an index of understanding of prescribed diet. Since age is an important variable to determine the awareness of calorie requirement, different strategies of nutrition education should be developed for different age groups, especially patients over 70 years old.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.170-173
• /
• 2006

Requirement management is an essential process that has a significant influence on the project success. Due to the evolutionary development nature of requirement, the effective management for requirement must include change process and configuration control. This paper describes how to implement effective requirement management process to the Korea Tilting Train eXpress development with the application of a model based systems engineering tool.

• Journal of Life Science
• /
• v.9 no.4
• /
• pp.368-374
• /
• 1999

Three soybean cultivars, Hwangkeum, Tanyeob and Enrei were planted in the same pot under glasshouse conditions to investigate the influence of the different soil water content such as pF 1.4(wet), 2.1(control) and 3.6(dry) on the transpiration rate, dry matter production and water requirement. The transpiration rate remained the high constant rates under the wet soil condition and the control than the dry condition, and showed a linear correlation between transpiration rate and solar radiation under the all condition of soil water. The transpiration rate highly increased in the morning, but dramatically decreased in the other time in a day. The dry matter production was higher under the conditions of wet soil and the control than that under the dry condition. Also, the dry matter production Tanyeob was higher than other cultivars under all soil water content. The water requirement was higher for Enrei and lower Tanyeob than the control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.419-419
• /
• 2000

This paper describes a requirement analysis for automotive engine design using a computer aided systems engineering tool RDD-100. Because the engine is a complex system with many subsystems, there are many needs of stakeholder throughout the life-cycle of the engine. The originating requirements have been derived from the needs and decomposed into leaf-node requirements with the tool. Many requirement errors have been detected during the decomposition process and resolved by modifying the requirements. Inconsistency problems have been also resolved with the tool, Analysis of engine requirements using RDD-100 brings clarity to engine design early in the development process.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.426-432
• /
• 2013

The construction industry consists of various and massive architectural information as an architectural process includes a variety of design stages with cooperation of many disciplines. Particularly, architectural information is generated and managed through the life cycle of a building, from conceptual design stage to the construction and maintenance. A Building Information Model (BIM) serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle from inception onward. BIM technology accomplished quantitative development being utilized in various disciplines. However, it is necessary to develop environment and requirement for qualitative improvement of BIM based project. Particularly, requirement is very important for architectural design evaluations. The purpose of this study is to develop and apply of quality control requirement for improving the quality of architectural design in open BIM environments. To achieve this purpose, the authors have investigated case study for open BIM data quality control (software, guideline and application case) and classified quality control targets according to physical/logical quality and data quality. In addition, the authors have defined open BIM based quality control process and developed quality control requirements. Finally, the authors have developed rule based quality check system using requirements for efficient quality control based on open BIM.