• Journal of Environmental Impact Assessment
• /
• v.16 no.2
• /
• pp.143-156
• /
• 2007

This study has researched the management status and the pollution level of water, soil, stream sediments of 11 abandoned coal mines out of a total of 12 within Obong-Dam area except Bukyung mine, which was submerged when constructing Obong-Dam, and selected areas which are in needs to have pollution control facilities in the first place. From the results of examination on the runoff at the waste rock pile and mineheads, the runoff from Sueun mine (pH, Fe, Al), Samwon mine (pH, Al), Wangdo mine (pH, Al), Mose mine (pH, Fe, Al) and Daeryeong mine (pH) exceeded the permissible discharge standards of the water quality, but the water at merging point with Obong-Dam after joined with Doma branch satisfied both Water Quality Standards and Drinking Water Quality Standards. In regard to groundwater contamination, it is found that areas where exceeded the Drinking Water Quality Standards are Wangdo mine (pH), Jangjae mine (pH, Zn), Daeryeong mine (pH) whereas all areas satisfied Soil Contamination Warning Standards of Soil Environmental Conservation Law. When comparing a research result on underwater sediments of branches of abandoned mines to the EPA Guidelines for classification of great lakes harbor sediments, Dongguk Gaerim (Fe), Jungwon mine (Fe), Daebo mine (Mn), Samwon mine (Mn) and Daeryeong mine (Mn) showed mid-level of contamination, whereas Sueun (Fe, Mn), Daebo mine (Fe), Woosung mine (Fe, Mn), Wangdo mine (Fe, Mn), Mose mine (Fe) and Daeryeong mine (Fe) showed high-level of contamination. In addition, contamination levels of underwater sediments in Wangsan and Doma branch where abandoned mine's branches merge together, Wangsan branch showed no contamination at all whereas Doma branch shows mid-level of contamination which reflect the Doma branch is affected by waste rock pile and minehead runoff of the abandoned mines in the Doma branch area. It is concluded that Mose mine and Sueun mine required treatment of acid mine drainage. and Wangdo, Jungwon, and Samwon mines were in need of mine tailing and erosion control work. The Samwon mine additionally required a control system for closed minehead runoff. Although the Samwon mine reached a high concentration of Al, Mn $Ca^{2+}$, $SO{_4}^{2-}$ in the runoff, the levels decreased after it was combined with a tributary. It has been concluded that after further monitoring of the cause of pollution, a preventive measure system may be needed to be built.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.2
• /
• pp.280-287
• /
• 2016

Foot and mouth disease (FMD) has a long history in Sri Lanka and was found to be endemic in various parts of the country and constitutes a constant threat to farmers. In Sri Lanka, currently there is no regular, nationwide vaccination programme devised to control FMD. Therefore, improving farmers' knowledge regarding distinguishing FMD from other diseases and ensuring prompt reporting of any suspicion of FMD as well as restricting movement of animals are critical activities for an effective FMD response effort. Therefore, the main purpose of this study was to clarify the relationship between farmers' knowledge levels and their behaviors to establish a strategy to control FMD. In our study, item count technique was applied to estimate the number of farmers that under-report and sell FMD-infected animals, although to do so is prohibited by law. The following findings were observed: about 63% of farmers have very poor knowledge of routes of FMD transmission; 'under-reporting' was found to be a sensitive behavior and nearly 23% of the farmers were reluctant to report FMD-infected animals; and 'selling FMD-infected animals' is a sensitive behavior among high-level knowledge group while it is a non-sensitive behavior among the low-level knowledge group. If farmers would understand the importance of prompt reporting, they may report any suspected cases of FMD to veterinary officials. However, even if farmers report honestly, they do not want to cull FMD-infected animals. Thus, education programs should be conducted not only on FMD introduction and transmission, but also its impact. Furthermore, consumers may criticize the farmers for culling their infected animals. Hence, not only farmers, but also consumers need to be educated on the economic impact of FMD and the importance of controlling an outbreak. If farmers have a high knowledge of FMD transmission, they consider selling FMD-infected animals as a sensitive behavior. Therefore, severe punishment should be levied for selling FMD-infected animals.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Korean Security Journal
• /
• no.14
• /
• pp.235-259
• /
• 2007

These days our society, no matter it is individual or community or nation it has diversity big and small trouble and Terrorism, disaster that gives national crisis in many different ways. Before we dont think disaster is big problem in nation crisis but now we have to think seriously and put the disaster problem in nation crisis. Also security terrorism is important in national crisis just same as security of nation and disaster in national crisis management. Specially, attacking national sovereign and the head of the government are still increasingly and if deadly terror happens than nation will get big crisis and can get aftereffect. Accordingly way of development about crisis control in security terrorism, first of all, for make confrontation system because of crisis management, need judical revision about escort law and prevention of terror. Second of all, need exclusion of guard danger element for strengthening guard safe action. Third of all, strengthening education to people so increase ability of conquest in the scene. Finally, security terror not only directly purpose also indirectly purpose increase, need to development about guards way and need a strong will to reduce terrorism, also put emphasis on prevention guards action and before the fact make perfection more perfect in crisis control to removal element of terror.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.548-556
• /
• 2015

The highly maneuverable fighter aircraft such as F-22, F-16 and F-15have the high maneuverability to maximize the combat performance, whereas the high maneuver characteristics might degrade the pilot's mission efficiency due to fatigue's increase by exposing him to the high gravity and, in the worst case, the pilot could face GLOC (Gravity-induced Loss Of Consciousness). The advanced aerospace company has applied the various technologies to improve the pilot's tolerance to the gravity acceleration, in order to prevent the pilot from entering the situation of the loss of consciousness. Especially, the Anti-G Suit(AGS) equipment to protect the pilot against the high gravity in flight could improve the mission success rate by decreasing the pilot's fatigue in the combat maneuver as well as prevent the pilot from facing GLOC. In this paper, a control algorithm is developed and verified to provide an optimal air pressure to AGS according to the gravity increase during the high performance maneuver. This result is expected, as the key technology, to contribute to the KF-X(Korean Fighter eXperimental), project in the near future.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.149-169
• /
• 2009

Integrated Pollution Prevention and Control(IPPC) has become an idealistic environmental prevention concept in developed countries and corresponds with principles of Industrial Ecology. The concept of emissions regulatory integration is a key factor for an integrated environmental management system. While most EU member countries have a cross-media regulatory system, Korea has a media-specific regulatory system which was found to have significant environmental management problems. The purpose of this study is to integrate the emissions regulatory system by resolving difficulties through procedural, organizational, and substantive analysis of integration. To this end, the following research was performed: The first task was to determine the target of the integrated emissions regulatory system. In connection with this, the "IPPC directive" of the EU and the "PPCA 2000" schedule 1 of the UK, as well as environmental laws in Korea were compared and analyzed. The second was to design a regulatory system model. This model was divided into three groups after considerations were made regarding the time it would take for the pre-application,application, and permission stages. Lastly, on the basis of this research, a revised bill for an integrated emissions regulatory system was suggested. Nevertheless, substantive analysis of integration focused on BAT requires supplementation in order to make the integrated emissions regulation system operate normally as an environmental management policy and regulation method. To this end, the specific characteristics of Korean society, culture, and law should be actively considered.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.660-665
• /
• 2012

The purpose of this study was to use basic data of dental hygiene curriculum by comparing the rolling method and modified stillman method. Plaque measurement method, Q-ray examination of the clinical utilization value shall review. True experimental design is randomized controlled trial to the intervention group and the control group. Measurements are plaque control record (PCR; O'Leary index) measurements and Quantitative Light induced fluorescnece Digital (QLFD) shooting as a pre-test was conducted. Intervention group is modified stillman method, control group is rolling method. Intervention after 5 weeks, PCR measurement and QLFD shooting was carried out as a post-test. Rolling method and modified stillman method plaque reduction did not differ. Intervention before and after the results of the comparison showed reduced plaque score after brushing law education. Also, Plaque reduction differences were more pronounced modified stillman method than rolling method. PCR and QLFD values of the correlation was not confirmed but SPS Score and the lower value of the ${\Delta}R$ value of the correlation. Plaque of maturity tooth that are not observed visually.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.25-36
• /
• 2021

This study analyzed the causes of flood accidents, such as isolation and lost footing accidents in Dorimcheon, to provide legal and institutional improvements. For cause analysis, Field Investigation, Stakeholder Interview, Report, manual, Law et al. Review, Analysis of water level change characteristics, automatic alarm issuance standard level analysis, and evacuation time according to river control were evaluated. Dorimcheon has the characteristics of a typical urban river, which is disadvantageous in terms of water control. In addition, the risk of flood accidents is high because the section where fatal accidents occur forms sharply curved channels. Tripping and isolation accidents occur in the floodplain watch and evacuation stage, which is the stage before the flood watch and warning is issued. Because floodplain evacuation is issued only when the water level rises to the floodplain, an immediate response according to the rainfall forecast is essential. Furthermore, considering that the rate of water level rise is up to 2.62 cm/min in Sillimgyo 3 and Gwanakdorimgyo, sufficient evacuation time is not secured after the floodplain watch is issued. Considering that fatal accidents occurred 0.46 m below the standard water level for the flood watch, complete control is very important, such as blocking the entry of rivers to prevent accidents. Based on these results, four improvement measures were suggested, and it is expected to contribute to the prevention of Tripping and Isolation Accidents occurring in rivers.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.2
• /
• pp.163-186
• /
• 2009

The missile technology and its development in south Korea have been restrained to the limit of 180 km by America which instead provided to Korea with security protection. In the same vein, America pressured South Korea to abort its nuclear weapons program so as to prevent another possible military encounter that can easily develop into a war between South and North Korea. This restraint was a bit relaxed when South Korea joined the Missile Technology Control Regime (MTCR) in 2001 whereby the limit was 300 km. The situation of South Korea is in much contrast with its neighbor, North Korea, which has fired Taepo Dong 1 and Taepo Dong 2 to put its alleged satellite respectively into the Earth orbit. The range of this rocket believed to be reaching more than 5,500 km, a range of the intercontinental ballistic missile, without any rein. South Korea that has just geared its full powers for its outer space industry, with the current space projects of putting its satellites into the low Earth orbit, will in future put its satellite into the geostationary orbit, 36,000 km above the Earth. To do so, such restraint had better be resolved. Korean space industry, as it is alike in other countries, started with putting and manufacturing sounding rockets, producing satellites but relying on foreign launching facilities, and learning launching capacities. Experiencing three time launchings of KITSAT, the current satellite projects of Korea are undertaken as follows: - Koreasat - STSAT - Komsat - MBSAT - COMS (Communication, Ocean, and Meteorological Satellite) Koreans waked up to the things of outer space in 2008 with the first Korean astronaut Li So-yeon, a lady bio systems engineer. Although the first Korean made rocket in cooperation with a Russian company to fire last August 2009 was a failure, it should be considered as an inevitable process for future endeavors. There are currently three outer space related laws of Korea: Aerospace Industry Development Promotion Act 1987, Outer Space Development Promotions Act 2005, and Space Damage Compensation Act 2008. The first two stemming from the two different ministries are, however, overlapping in many aspects and have some shortcomings to be improved.

• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.1
• /
• pp.45-85
• /
• 2005

The purpose of this paper is to examine the concept of "accident" under the Warsaw system including the Warsaw Convention for the Unification of certain Rules for International Carriage by Air of 1929 and the Montreal Convention of 1999. Most leading case on this subject is Air France v. Saks(470 U.S. 392 (1985)). In the Saks case, it was held that the definition of an accident must be applied flexibly, and most courts have adhered to the definition of accident in Saks case, the application of accident has been less than consistent. However, most cases have held that if the event is usual and expected operation of the aircraft, then no accident has occurred. Courts have also held that where the injury results from passenger's own internal reaction to the usual, normal, and expected operations of the aircraft, it is not caused by an accident. As the Warsaw drafters intended to create a system of liability rules that would cover all hazards of air travel, the carrier should liable for the inherent risks of air travel. It is right in that the carrier is in a better position than the passenger to control the risks during air travel. Most US courts have held that carriers are not liable for one passenger's assault on the other passenger. The interactions between passengers are not part of the normal operations of the aircraft and are therefore not covered by the word "accident" under Art 17 of the Warsaw Convention. It is regretful that the Montreal Convention did not attempt to clarify the concepts of accident in itself. In the light of an emerging tendency to hold the air carrier liable for occurrences that do not exactly go to the operation of the aircraft, it is desirable to regulate that the carrier is liable for an "event" instead of an "accident" in accordance with the Guatemala City protocol.