• Journal of Bio-Environment Control
• /
• v.3 no.2
• /
• pp.119-127
• /
• 1994

This study was conducted to investigate the effects of temperature and light conditions on the vigor and growth responses of red pepper(Capsicum annuum L.) seedlings in the nonheated plastic houses with triple and quadruple coverings during winter. The results obtained were as follows ; 1. The growth in terms of plant height, number of leaves, leaf area and dry weight of each organ was reduced up to 50% in the triple coverings compared to quadruple ones. The greatest difference between the triple coverings and quadruple ones was the leaf area, showing two to five times larger in the quadruple ones. Therefore, the differences of the early environmental conditions during raising seedling stage was well reflected. 2. The leaf expansion in the early stage of seedling was delayed in the triple coverings and subsequently crop growth rate(CGR) significantly reduced. The specific leaf area (SLA) in the triple coverings was less than quadruple ones. The net assimilation rate (NAR) was increased in the early stage of seedlings and then reduced in the quadruple coverings. In triple ones, however, the great reduction showed at six weeks after sowing and then increased sharply. 3. The linear relationship among leaf area, total dry weight and leaf dry weight was observed in the all experimental areas, while between leaf area and crop growth rate only in the quadruple coverings, and between leaf area and net assimilation rate in both triple and quadruple ones. 4. The dry matter partitioned to the leaf increased up to six weeks after sowing in the triple coverings but reduced in the stem and root. However, the adverse results were obtained in the quadruple ones. 5. In the triple coverings, the number of branches showed the exponential increment while fruit weight showed linear increment in both triple and quadruple ones. Higher yield was obtained in the quadruple ones. 6. The shoot dry weight among the characteristics of seedlings was greatly contributed to the yield of red pepper after transplanting. Accordingly, one of the decisive criterion for good quality of red pepper seedlings was determined by the highest correlation between shoot dry weight of growing plant and fruit yield of pepper plant.

• International Journal of Highway Engineering
• /
• v.1 no.1
• /
• pp.107-119
• /
• 1999

The joints in the jointed concrete pavement provide a control against transverse or longitudinal cracking at slab, which may be caused by temperature or moisture variation during or after hydration. Without control of cracking, random cracks cause more serious distresses and result in structural or functional failure of pavement system. However, joints nay cause distresses due to its inherent weakness in structural integrity. Thus, the evaluation at joint is very important. and the joint-related distresses should be evaluated reasonably for economic rehabilitation. The purpose of this paper was to develop an evaluation system at joints of jointed concrete pavement using finite element analysis program, ILLI-SLAB, and nondestructive testing device. FWD. To develop an evaluation system for JCP, a sensitivity analysis was performed using ILLI-SLAB program with a selected variables which might affect fairly to on the performance of transverse joints. The most significant variables were selected from precise analysis. An evaluation charts were made for jointed concrete pavement by adopting the field FWD data. It was concluded that the variables which most significantly affect to pavement deflections are the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G), and limiting criteria on the performance of joints at JCP are 300pci. 500,000 lb/in. respectively. Using these variables and FWD test, a charts of load transfer ratio versus surface deflection at joints were made in order to evaluate the performance of JCP. Practically, Chungbu highway was evaluated by these evaluation charts and FWD field data for jointed concrete pavement. For Chungbu highway, only one joint showed smaller value than limiting criterion of the modulus of dowel/concrete interaction(G). The rest joints showed larger values than limiting criteria of the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G).

• Journal of Korean Home Economics Education Association
• /
• v.20 no.1
• /
• pp.63-83
• /
• 2008

The purpose of this study was to investigate food involvement, dietary behavior and relationship according to the levels of nutrition knowledge. Data in this research was obtained by using the questionnaire which was given out to 528 subjects(boys 182, girls 346) in Naju city area. The awareness of dietary behavior of middle school students put the first priority on breakfast from among 3 meals a day, and they selected 'taste' as the most important criterion. The majority and above of subjects responded that they had ever delivered food at least more than 1 or 2 times a week. This research found that middle school students are tends to regard themselves as being rather close to obesity or fatness. Subjects were also aware that they have some problems with a unbalanced eating habbit and irregular timing of having meals, and more than 40% of the subjects responded that they obtain the most of information about food & dietary behavior through television. Significant difference was found in the food involvement with related variables such as sex, grade, the academic background of mother, self-perception of weight, the way of weight control, perception of problems requiring improvement. Dietary behavior related with variables showed significant difference. Variables are grade, perception of meal importance, selecting standard of food, method of weight control, improvement of eating habits. Dietary behavior is found highly relative with food involvement. Dietary behavior is found highly relative with food involvement. In conclusion, suggestions that could bring motivation to improvement is more essential to the nutrition education rather than knowledge oriented education.

• Journal of Hospice and Palliative Care
• /
• v.9 no.2
• /
• pp.86-92
• /
• 2006

Purpose: This study was conducted to develop a measuring tool for spiritual care performance of hospice team members. The tool may be utilized for providing hospice patients with more systematic and standardized spiritual tares. Methods: The concept and questions of the tool were developed, and then its validity and reliability were tested. For the validity and reliability tests, a self-reported questionnaire comprising 33 questions with 4 point scale ($1{\sim}4$), was developed, and the data were collected from 192 hospice team members from December 2005 to February 2006. Results: Thirty three questions, drafted through literature review and professional consultation, were reviewed by 20 professionals for their validity, were revised and supplemented resulted in the final 33 questions. The questions with a correlation coefficient grater than .30 were selected: all the 33 questions were selected based on this criterion. The reliability coefficient, Cronbarh's ${\alpha}$, was 0.95. The 33 questions were analyzed for factors, and six factors were extracted: relationship formation and communication, encouragement and promotion of spiritual growth, linking with spiritual resources, preparation of death, evaluation and quality control for spiritual intervention, Intervention, and spiritual assessment for intervention. Conclusion: The tool developed in this study includes six factors and has high level of reliability. This tool Will greatly contribute to assess and improve hospice care services, providing systematic and standardized spiritual cares for terminally ill patients and their families.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.37-45
• /
• 2006

Recently, wood-framed houses has been built in the Korea for pension. Wood is good material for human healthy, while the construction lumbers are treated with preservative such as CCA (chromated copper arsenate), which contain some toxic elements for human body. However, if the waste woody biomass treated with various heavy metals, which has been collected from house construction or demolition, was fired in the field, and incinerated or landfilled after mass collection, such components will result in the toxic air pollutants in the burning or land fills, and spreaded into other areas. So the careful selection of wood and chemicals are required in advance for house construction, in particular, for environment-friendly housings. Therefore, this study was carried out to determine the content of toxic heavy metals in woody materials such as domestic hinoki and imported hemlock treated with CCA for housing materials, and the post-treated wood components such as organic fertilizer, sludge, dry-distilled charcoal and carbonized charcoal, to be returned finally into soil. The results are as follows. 1) The chemical analysis of toxic trace elements in various solid biomass required accurate control and management of laboratory environment, and reagents and water used, because of the error of data due to various foreign substances added in various processing and transporting steps. So a systematic analyzers was necessary to monitor the toxic pollutants of construction materials. 2) In particular, the biomass treated with industrial biological or thermal conditions such as sludge or charcoals was not fully dissolvable after third addition of $HNO_3$ and HF. 3) The natural woody materials such as organic fertilizer, sludge. and charcoals without any treatment of preservatives or heavy metal components were nontoxic in landfill because of the standard of organic fertilizers, even after thermal or biological treatments. 4) The CC A-treated wood for making the construction wood durable should not be landfilled, because of its higher contents of toxic metals than the criterion of organic fertilizer for agriculture or of natural environment. So the demolished waste should be treated separately from municipal wastes.

• The korean journal of orthodontics
• /
• v.32 no.3 s.92
• /
• pp.195-207
• /
• 2002

Numerous studies have revealed the similarities and discrepancies in two divisions of class II malocclusion, since these malocclusion groups have been postulated to be disparate criterion, much as classified under one diagnostic umbrella. This study was undertaken to describe the craniofacial configurations of class II division 1 and 2, and consequently to discriminate the morphologic differences between the two malocclusion groups in Korean sample. Lateral headfilms of 34 class H division 1 and 29 division 2 were employed, while those of 142 adults of normal occlusion served as a control. The landmarks were digitized and 26 variables were statistically analyzed for one way ANOVA. 1. There manifested no statistically significant difference in maxillary position anteroposteriorly. Normal occlusion group exhibited most anteriorly positioned mandible, whereas class II division 1 showed the most retroposition. Class II division 1 disclosed clockwise rotation tendency of mandible, which resulted in position of the chin Posteriorly. 2. Class II division 1 showed greater in SN to MP, SN to PP significantly than other groups. 3. Class II division 2 showed smaller genial angle and larger mandibular body length than other groups. 4. Class II division 1 revealed greater anterior lower face height than other groups, whereas division 2 dictated significantly greater posterior face height. 5. Class II division 2 expressed the most retroclined lower incisor, while division 1 manifested the most proclination. The largest interincisal angle resided in Class II division 2 group. There were no significant differences in upper molar position anteroposteriorly.

• Journal of Haehwa Medicine
• /
• v.11 no.1
• /
• pp.137-149
• /
• 2002

Dong-Eui-Bo-Gham Oriental medicine clinic on the purpose of losing their weight, from March 1, 2001 to March 1, 2002. The characteristics studied were gender, average weight, average height, distribution of body fat rate, base body metabolism rate, distribution of bmi, purpose of losing weight, treatment history, cause of gaining weight, clinical symptoms, distribution of Sahsang constitution, and change of body constituent. The conclusions drawn from this study were: 1. Among patients who came to the clinic for weight loss, there were 16 females (80%), and 4 males (20%). The ratio of gener was 1 to 4 (male to female) The distribution of their ages were 1 in one's teens (5%), 6 in their 20s (30%), 7 in their 30s (35%), and 6 in their 40s (30%). 2. The average weight of the patients was 72.155kg, and their average height was 163.2 cm. 3. The body fat rates of patients were distributed as: 2 were below 25 (10%), 3 were 25 to 30 (15%), 8 were 30 to 35 (40%), 5 were 35 to 40 (25%), and 2 were 40 to 45 (10%). 4. The base body metabolism rates of the patients were distributed as: 1 was below 1000Kcal (5%), 6 were 1100 to 1200Kcal (30%), 5 were 1200 to 1300Kcal (25%), 6 were 1300 to 1400Kcal (30%), and 2 were 1400 to 1500Kcal (10%). 5. The distribution of the patients bmi was: 4 were below 20 (20%), 5 were 20 to 25 (5%), 11 were 25 to 30 (55%), and 4 were 30 to 35 (20%). 6. The patients visited the clinic to lose their weight for the follwoing purposes: 5 were related to health concerns (25%), and 15 were to imprve their physical apprearnce (75%). Among patients who wanted to lose their weight becase of health concerns, 4 were married (20%) and 1 was single (5%). Among patiens who wanted to lose their weight to improve their physical appearance, 6 were married (30%) and 9 were single (45%). 7. As for the past treatment methods, physical exercises were most frequently used (19 patiens, 43%). 14 tried diet (32%), 8 used food substitues (19%), 1 was treated through Western medicine, and 1 was not related to any of these (2%). 8. Main reasons for weight gains were: 12 were related to overeating (40%), 10 were stress (33%), and 8 were lack of physical exercise (27%). 9. Physical symptoms included: 15 were fatigue (29%), 14 were constipation (26%), 13 were body swelling (25%), 3 were headache (5%), menstruation pain (4%), one was stomach upset (2%), 2 were related to physical structure, and 2 were related to other (4%). 10. As for the distribution of Sahsang constitution, 10 were Taeum (50%), 9 were Sohyang (45%), and 1 was Sohum (5%). 11. The average muscle weight was 44.87kg, average abdomen fat rate was 0.8999, and average base body metabolism rate was1369.2Kcal. 12. For the 5-week period, The body fat rate changes were 35.93 1.56% to 30.40 1.98% for A group, and 34.27 1.19% to 31.73 1.38% for B group. The abomen fat rate changes were 0.90 0.02% to 0.86 0.03 for A group, and 0.89 0.02% to 0.83 0.02% for B group. The body fat weight changes were 26.92 2.04kg to 20.74 1.98kg for A group, and 27.86 3.37kg to 24.58 3.02kg for B group. The body weight chages were 72.36 3.18kg to 64.54 2.55kg for A group, and 72.48 3.14kg to 67.74 3.11kg for B group. The muscle rate changes were 43.86 1.63kg to 43.10 1.76kg for A group, and 42.72 1.22kg to 41.60 1.86kg for B group. Overall, A group was superior to B group. 13. After being treated for obesity, 13 patients used exercise treatment (65%), 5 continued to receive obesity treatment (25%), and 2 used diet (10%). Based on these results, we could conclude that the importande of setting a criterion of obesity and weight control have changed according to changes in social and cultural values, and that treatment of obesity through Oriental medicine and research should keep up with changes in esthetic and psychological values.

• Cartoon and Animation Studies
• /
• s.26
• /
• pp.79-108
• /
• 2012

This thesis is on the purpose of seeking for the possibility of a mechanism in interpreting, analyzing and criticizing cartoons which are applied to the concept of "the gaze" based on "the otherness of vision", which states a pluralistic visual world. It proves that cartoons are in line with other art works that are the subject to "lack and desire"; the gaze, greets reality and acts as an important criterion of analyzing and criticizing the trend in contemporary art, in which the cartoon expresses the gaze in harmony within its work of art. In this thesis, the artist, Kang Doh-ha structuralized ambiguous and difficult forms of art as he has cumulated experimental minds by working in an indie cartoon plane for a long period of time. Among his works of art, he identified the "invisible world" through his piece "Kubrik". Therefore, he represented: a metaphor and a metonymy, an ambiguously situational expression, an intentional and emotional error, the structure of individuality and integration, and finally tension beyond its meaning through use of 'the gaze' that is both the cause and the subject of a desire in the visible world which Lacan academized when he interpreted and analyzed "Kubrik". The concept of the gaze can be used in a variety of ways to display one another's presence in relation each character, revealing a spot of lack by staring back at readers or audiences and furthermore, to analyze and criticize the hidden side of the art piece by critics. The most important details are the artist's gaze, which is seen in the eyes of the analysis and also his or her criticism of the cartoon, which functions as a metaphoric screen in which the subject himself or herself betrays the law of desires thus enabling the violent and cruel reality to be masked and indulged in plays. This will serve as an element that will lead into an art as well as control the degradation to just a piece of enjoyment with the cartoon remaining only within the visual world.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.