• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.107-113
• /
• 1990

A series of cubical triaxial tests with independent control of the three principal stresses were performed on a compressible sand. All specimens which were formed by depositing the fine sand loosely, were used. It was found that slope of the stress-strain curve increased with increased b value, and the major principal strain at failure first remains approximetely constant for b values smaller than about 0.3 for drained condition and 0.6 for undrained condition respectively, and thereafter decreases with increasing value of b. The test results showed that the direction of the strain increments at failure form acute angles with the failure surfaces for both the drained and undrained condition. The results are thus not in agreement with the normality criterion from classic plasticity theory. However, it was found that the projections of the plastic strain increment vectors on the octahedral plane are perpendicular to the faiure surface in that plane.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.1829-1831
• /
• 2012

Background: The generalized gamma distribution statistics constitute an extensive family that contains nearly all of the most commonly used distributions including the exponential, Weibull and log normal. A saturated version of the model allows covariates having effects through all the parameters of survival time distribution. Accelerated failure-time models assume that only one parameter of the distribution depends on the covariates. Methods: We fitted both the conventional GG model and the saturated form for each of its members including the Weibull and lognormal distribution; and compared them using likelihood ratios. To compare the selected parameter distribution with log logistic distribution which is a famous distribution in survival analysis that is not included in generalized gamma family, we used the Akaike information criterion (AIC; r=l(b)-2p). All models were fitted using data for 369 women age 50 years or more, diagnosed with stage IV breast cancer in BC during 1990-1999 and followed to 2010. Results: In both conventional and saturated parametric models, the lognormal was the best candidate among the GG family members; also, the lognormal fitted better than log-logistic distribution. By the conventional GG model, the variables "surgery", "radiotherapy", "hormone therapy", "erposneg" and interaction between "hormone therapy" and "erposneg" are significant. In the AFT model, we estimated the relative time for these variables. By the saturated GG model, similar significant variables are selected. Estimating the relative times in different percentiles of extended model illustrate the pattern in which the relative survival time change during the time. Conclusions: The advantage of using the generalized gamma distribution is that it facilitates estimating a model with improved fit over the standard Weibull or lognormal distributions. Alternatively, the generalized F family of distributions might be considered, of which the generalized gamma distribution is a member and also includes the commonly used log-logistic distribution.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.51-59
• /
• 2016

Measurements of the automobile manufacturers are available anywhere and anytime, directly based on the criterion of failure is measured. The maintenance of high-precision production activities is direct evidence of the fact that competitive manufacturing activities are very important in determining the success of companies to recall defective starting from raw material costs. The current manufacturing sites produce calipers and clearance gauge the degree of tool only specific. Therefore, judging the quality, including the number of errors, requires a lot of attention to the dimension failures in day-to-day measurements and measurement tasks and duties repeated in difficult situations. In this paper, we aim to develop a vehicle manufacturing plant site using each of the manufacturing processes while operating a measurement tool. We display it using the Image Processing PC-based S/W with all those visual facts by management and recorded as image information a more accurate and current situation to obtain information and share visual measurements. We carry out research on the design and development vision inspection algorithm applied for pattern-recognition techniques that can help manufacturing site quality control.

• Ocean Science Journal
• /
• v.42 no.2
• /
• pp.129-134
• /
• 2007

Increasing industrial development in the Masan Bay area of Korea over the past decades increased the risk for the survival of marine organisms in the bay area by the deterioration of the water quality. Since living organisms have the ability to adapt contamination-associated stimuli by the alteration of gene expression, changes in proteins can be used as an important criterion for assessing the levels of environmental conditions. In this study, therefore, alterations of the expression of proteins in the muscle of Limanda yokohamae from Dukdong and Dotsum in the bay area were surveyed and characterized as compared with Haegumgang, which served as a control site. The results demonstrated that the twenty spots detected from Dukdong and Dotsum were similar to each other. Fifteen proteins were found to be predicted or undefined proteins, while five proteins were identified as heavy polypeptide 11 of myosin, apolipoprotein A-I, fibroblast growth factor 17b precursor, G protein-coupled receptor kinase 1 b and bonnie and clyde. These data suggest that local fish in the bay area have dysfunction in muscle physiology including contraction, lipid metabolism, proliferation and differentiation and nervous system.

• The Journal of Internal Korean Medicine
• /
• v.31 no.2
• /
• pp.201-211
• /
• 2010

Objectives : Atopic dermatitis is a chronic inflammatory skin disease which is characterized by severe pruritis, erythema, edema, effusion and scabs. The aim of this study was to understand effects of Arctium lappa Linne, which is well known for its efficacy for various skin diseases, on atopic dermatitis Methods : We conducted this experiment using the DNFB-induced NC/Nga mice. After two weeks of applying DNFB to NC/Nga mice, severe symptoms of atopic dermatitis occurred. We divided the mice into three different groups: a control group which was given no treatment at all, a group treated with dexamethasone (1mg/kg), and another group treated with Arctium lappa Linne (300mg/kg). After one week of treatment, results were recorded according to their improvement on skin, itching behavior, IL-4, and INF-$\gamma$ measurement, which is a significant criterion for diagnosing atopic dermatitis. Results : Itching behavior showed significant improvement in the Arctium lappa Linne group. However Arctium lappa Linne failed to reduce IL-4 and INF-$\gamma$ count. Also there was no satisfying improvement on AD-like skin lesions on the rostral back of the NC/Nga mice treated with Arctium lappa Linne. Conclusions : Arctium lappa Linne showed improvement in itching behavior in NC/Nga mice induced by DNFB. Arctium lappa Linne showed neither significant improvement on skin lesions nor in IL-4 and INF-$\gamma$ measurement.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.141-151
• /
• 1999

The resistance Spot Welding is widely used in the field of assembling the plates. However we don't still have any satisfactory solution, which is non-destructive quality evaluation in real-time or on-line, against it. Moreover, even though the rate of welding under the condition of expulsion has been high until now, quality control of welding against expulsion hasn't still been established. In this paper, it was proposed on the quality assurance technique of resistance spot welding pieces using Neuro-Fuzzy algorithm. Four parameters from electrode separation signal in the case of non-expulsion, and dynamic resistance patterns in the case of expulsion are selected as fuzzy input parameters. The parameters consist of Fuzzy Inference System are determined through Neuro-Learning algorithm. And then, fuzzy Inference System is constructed. It was confirmed that the fuzzy inference values of strength have within ${\pm}$4% error specimen in comparison with real strength for the total strength range, and the specimen percent having within ${\pm}$1% error was 88.8%. According to KS(Korean Industrial Standard), tensile-shear strength limit for electric coated of zinc is 400kgf/mm2. Judging to the quality of welding is good or bad, according to this criterion and the results of inference, the probability of misjudgement that good quality is valuated into poor one was 0.43%, on contrary it was 2.59%. Finally, the proposed Neuro-Fuzzy Inference System can infer the tensile-shear strength of resistance spot welding pieces with high performance for all cases-non-expulsion and expulsion. And On-Line Welding Quality Inspection System will be realized sooner or later.

• Korean Journal of Veterinary Research
• /
• v.41 no.1
• /
• pp.37-42
• /
• 2001

This research was conducted to investigate the effects of far infrared radiological materials on growth performance, immune response and changes of microbial flora in feces for growing pigs. Twelve growing pigs($Duroc{\times}Yorkshire{\times}Landrace$, average initial body weight of $15.6{\pm}0.5kg$) were used in a 40 day growth assay. Treatments were control(saline injection with diet: S); saline injection with Bio-Plus in diet(SBP); and vaccination with Bio-Plus in diet(VBP) in a randomized complete block design with initial BW as the blocking criterion. Serum concentrations of IgG of SBP and VBP were higher than those of S at day 10(p<0.05), 20(p<0.05), 30(p<0.05) and 40(p<0.05). Pigs fed with treatment diets had increased lymphocyte level compared to S at day 20(p<0.05) and 40(p<0.05). Cortisol was lower in treatments than in S at day 30(p<0.05). At day 20, there was no significant difference in E. coli among the treatments. However, it was observed that E, coli of the treatments was decreased compared to S at day 40(p<0.01). Lactobacillus of SBP was significantly higher(p<0.05) than that of S at day 40. In conclusion, the results of the experiment suggest that far infrared radiological materials could be a very beneficial immune response for growing pigs in health aspects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.745-751
• /
• 2014

For the multi-nozzle propulsion, the rupture pressure of nozzle closure has an effect on the initial strain rate of ignition. Moreover, the deviation of rupture pressure for each nozzle closure leads to side forces which can disturb the attitude control of rocket. When designed, it should be considered whether nozzle closures are ruptured equally and exactly in the intented pressure. In this paper, the rupture behavior is analyzed by analytical and experimental methods for plate and "+" notched nozzle closures. The rupture pressure and deviation for operating temperature, whether notched or not and notched directions are analyzed. This paper provides a comparison between rupture pressure prediction of finite elements method which tool is Abaqus/Explicit and results of the rupture test. Jonson-Cook shear failure model which corresponds to the damage initiation criterion were used in this simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.163-170
• /
• 2000

Accident statistics shows that the portion of fatal occupant injuries due to side impacts is considerably high. The side impact usually leads to a severe intrusion of side structure into the passenger compartment. Furthermore, the safety zone for the side impact is relatively small compared to the front impact. Those kinds of physics for side impact frequently result in a fatal injury for the occupant. Therefore, NHTSA and EEVC are trying to intensify the regulation for the occupant protection against side impact. Both the regulation and recent market trends are asking for an installation of side airbag. There are several types of system configuration for side impact sensing. In this paper, we adopt the acceleration-based remote sensing method for the side airbag control system. We mainly focus on the development of hardware and crash discrimination algorithm of remote sensing unit. The crash discrimination algorithm needs fast decision of airbag firing especially for high-speed side impact such as FMVSS 214 and EEVC tests. It is also required to distinguish between low-speed fire and no-fire events. The algorithm should have a sufficient safety margin against any misuse situation such as hammer blow, door slam, etc. This paper introduces several firing criteria such as acceleration. velocity and energy criteria that use physical value proportional to crash severity. We have made a simulation program by using Matlab/Simulink to implement the proposed algorithm. We have conducted an algorithm calibration by using real crash data for 2,500cc vehicle. The crash performance obtained by the simulation was verified through a pulse injection method. It turned out that the results satisfied the system requirements well.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.332-340
• /
• 2011

A missile with a strapdown seeker should properly estimate line-of-sight(LOS) rate using its attitude information and the look angle of the seeker because LOS rate information in an inertial coordinate system, which is used for a proportional navigation(PN) homing guidance, can not be obtained directly. However, an unnecessary feedback loop(Parasite Loop) is formed in the guidance and control loop, and it may cause the guidance performance degradation or even the unstability of the system(Parasite Effect). This paper presents estimation methods for the LOS rate information and effective ways to minimize the parasite effect using Routh-Hurwitz stability criterion. Various numerical simulations are also included to verify the proposed methods.