• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.687-694
• /
• 2014

This paper focuses on the analysis and compensation of thrust ripples in permanent magnet linear synchronous motors (PMLSM). The main drawback in PMLSMs is the presence of thrust ripples, which are mainly due to the interaction between the permanent magnets and armature slotted core. These thrust ripples reduce the performance of the drive system in high precision applications especially at low speeds. This paper analyzes thrust ripples using the discrete wavelet transform. These undesired thrust ripples are compensated by using an adaptive feed forward controller. It is observed that this novel controller reduces about 65 percent of the thrust ripples. An extensive simulation is performed through MATLAB and it is validated through experimental results using a d-SPACE system with a DS1104 control board.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1398-1400
• /
• 2005

In this paper, a modular dc-to-dc converter, in order to apply to the control board of train vehicles, is presented. Forward converter with active-clamp reset circuit and synchronous rectifier(SR) is employed to achieve high efficiency. To reduce the size and height of the converter, low profile magnetic components are used. The design and performance of the modular dc-to-dc converter with experiments on a 50W(5V/10A) prototype for the 60V$\sim$140V input voltage range are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.129-132
• /
• 1996

There is a tendency nowadays to produce increasingly miniaturized electronic equipment which incorporate parts that have to be precisely positioned, like lenses, heads and CCD's in scanners, printers, copiers, VCR's, optical fiber modules, etc. In contrast to the production process of precision parts, which is currently being carried out automatically, the assemblage process is still being performed by specially skilled technicians. The assemblage process comprises normally the following steps: firstly, the parts are roughly positioned and partially fixed, secondly, the parts are manually nudged towards the target position and finally glued, screwed or welded. This paper presents a system that uses six piezo Impact Drive Mechanisms for accurate micro positioning within three degrees of freedom (lateral and longitudinal translation and rotation). The system is designed to positioning a printed circuit board with an accuracy better than 3 .mu.m (for translations), 5 mrad (for rotation).

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.643-645
• /
• 2021

마인크래프트 파이는 라즈베리 파이 보드용으로 개발된 특화된 마이크래프트 버전으로 주로 미래의 프로그래머를 위한 교육용 도구로 주로 사용되었다. 본 논문에서는 파이썬 3 언어와 마이크래프트 파이 소프트웨어를 사용하여 라즈베리 파이 4 보드의 GPIO 핀을 제어하는 기본적인 방법을 구현하였다. 구현된 방법은 라즈베리 파이에 내장된 풍부한 파이썬 라이브러리와 마인크래프트 파이의 우수한 게임 기능이 응용 분야의 하드웨어와 소프트웨어 요구 조건을 만족하도록 효율적으로 결합될 경우 교육 분야와 메타버스 응용 분야에 쉽게 적용될 수 있다.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1860-1867
• /
• 2016

In this paper, first, a linearized modeling of a phase shift full-bridge converter used in chargers of electric vehicles is derived by using state-space approach and transfer functions from the duty ratio to output voltage and the inductor current are also verified. second, control systems for the output voltage and the inductor current are designed using the root locus technique. It is illustrated by experimental results that the control performance on the output variables is satisfied with the designed digital control system based on a automobile qualified 32-bit microcontroller.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.805-815
• /
• 1994

The development of automatic production systems has a trend toward Computer Integrated Manufacturing System(CIMS) in recent years. In hardware configuration, CIMS are composed of intelligent CAD/CAM work stations, multifunction CNC machining centers including material handling systems. The DNC systems present the key element of automation hierarchy in a FMS. A DNC system is one which connects a number of numerically-controlled machines to a common memory in a digital computer for part program storage with provision for on-demand distribution of part program data to machines using communication in hierarchical structure of central computer, control computer and cell controller. This paper describes the development of Behind-the-Tape-Reader(BTR) type DNC system using CYBER 180-830 as a central computer and IBM PC-386 cell control computer and NC lathe with FANUC 5T NC controller. In this system, the connection between central computer and cell control computer is done via RS-232C serial interface board, and the connection between cell control computer and FANUC 5T controller is done via parallel interface board. The software consists of two module, central computer communication module for NC program downloading and status uploading, NC machine running module for NC operating.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1656-1662
• /
• 2010

Automatic train control systems are divided into ATC, ATP and ATS systems etc. The ATP and ATS systems offer discontinuous information for train control. While the ATC systems provide continueous information for train control. There is a method for offering continuous information by AF track circuits. Magnetic fields are formed by current through rails in the AF track circuit systems. So, the continuous information is received by the magnetic fields on a on-board antenna. Coating materials on rails are researched to decrease defects such as head check, shelling, corrugation, squats and so on in Germany. Currently, a coating method of rail construction is proposed by using the ceramics in Korea. When deciding physical characteristic of ceramics, researches are required about variation of flux density by the ceramics. In case that the flux density is much lower than existing value, the information for train control is not transmitted to the on-board antenna. In this paper, inductance on rails is calculated and a model is presented about variation of the magnetic field intensity in the AF track circuit. Standard permeability of ceramics is proposed by analyzing the variation of magnetic field intensity. It is demonstrated by using Maxwell and Matlab program.

• 한국멀티미디어학회논문지
• /
• 제6권5호
• /
• pp.889-895
• /
• 2003

본 논문에서는 사용자가 마우스나 키보드를 사용하지 않고 원거리에서 보다 쉽게 음악 감상이나 영화 감상이 가능하도록 PC용 적외선 통신 어댑터와 이를 활용한 응용 소프트웨어를 개발하였다. 적외선 통신 어댑터는 적외선 수신부와 직렬 통신 인터페이스부로 구성된다. 적외선 수신부는 적외선 송신부(리모콘)의 입력 신호를 받아 적절한 스캔 코드를 생성하며, 직 렬 통신 인터페이스부는 생성한 스캔 코드를 직렬 통신을 통해 PC로 전달하는 기능을 한다. 개발한 응용 소프트웨어는 PC에서 음악 감상과 영화 감상 기능을 제공하며, 수신한 스캔 코드를 이용하여 재생, 정지, 일시 정지, 볼륨 조절 등의 제어가 가능하도록 구현하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권1호
• /
• pp.13-22
• /
• 2002

Stink bug, Canthecona furcellatta (Hemiptera: Pentatomidae), is an important predator of silkworm larvae. Nymphs and adult attack the early stage silkworm larvae and causes about 10-15 per cent loss to silk industry. Synthetic organic pesticides has tremendous impact on minimizing the pest population but repeated and frequent use has created problems of residual toxicity, development of resistance to insecticides, pest resurgence and out break, phyto-toxicity and hazards to non target species and beneficial organism. Silkworms are very sensitive to pesticides; therefore, attempt has made to control the bug population through introduction of its native natural enemies in the silkworm-rearing field. Biological control has tremendous scope in sericulture because it is eco-friendly in nature and non-harmful farmers. Native natural enemies have been screened. Psix striaticeps, Trissolcus spp. and Telenomus spp. have been recorded as the most potential parasitoid against pentatomid bug. Life cycle, sex ratio and other various attributes of the par-asitoids have been recorded. The parasitization potential of the parasitoid is very high and they have the ability to discriminate between parasitized and unpar-asitized host. Mass propopagation technique under laboratory condition has been standaydized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.244-248
• /
• 1987

The force/torque sensor for robot is developed. The compliance algorithm for peg-in-hole insertion task using the forec/troque sensor is developed. The system consists of an IBM PC, robot, force/torque sensor, strain meter, A/D board, and interface board. The IBM PC functions as a main processor and the robot controller as a slave processor. The sensor is constructed to measure $T_x$, $T_y$, $F_z$ which are necessary to precisely execute a peg-in-hole insertion task by SCARA type assembly robot. The outputs of sensor are analyzed. On the basis of the analysis, compliance algorithm for peg-in-hole insertion task is developed. Some comments concerning the development of wrist force/torque sensor and compliance algorithm are given.