• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.12
• /
• pp.571-576
• /
• 2002

This paper is to develop jumping ring system with three sensor arrays and to control levitated ring using dynamic neural mode. Placing an aluminum ring on the core and switching on an AC source causes the ring to jump in the air due to induced currents. The educational system is composed of 40th optical sensor array, encode circuit, 89C51 microprocessor and control board. The control board consists of power IC, and phase controller. Real time process is present to obtain a height of levitated ring for three different sensor arrays. Based on the educational system and the proposed dynamic neural mode, the height of levitation of the ring is controlled by reference signals. This paper focuses on real system controls using the dynamic neural mode with on line learning algorithm.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.111-112
• /
• 2017

This paper presents a novel three-port converter for the OnBoard Charger of Electric Vehicles by using an impedance control network. The proposed concept is suitable for charging a main battery and an auxiliary battery of an electric vehicle at the same time due to its power handling capability of the converter without additional switches. The power flow is managed by the phase angle (${\Theta}$) between the ports whereas voltage at each port is controlled by the asymmetric duty cycle and the phase shift (${\Phi}$) between the inverter lags controlled by the impedance control network. The proposed system has a capability of achieving zero voltage switching (ZVS) and zero current switching (ZCS) at all the switches over the wide range of input voltage, output voltage and output power. The feasibility of the proposed system is verified by the PSIM simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.533-538
• /
• 2007

A semi-passive vibration isolation control method for enhancing pointing performance of on-board payload has been derived, and its effectiveness has been evaluated through numerical simulation. The semi-passive control law proposed in this study was derived so as to obtain the same performance as a high passive damping at low frequencies and obtain the same performance as a passive low damping at high frequencies. In the numerical simulation, the intended vibration isolation performance of the semi-passive control law has been obtained.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.649-651
• /
• 1999

This paper presents SNMP remote management system for power plants using micro-controller. Control board supporting LAN-based remote monitor and control is produced and MMI program on PC is also constructed. To expand into Internet, SNMP(Simple Network Management Protocol), the standard network management protocol of TCP/IP protocol suite, is ported to this control board consisted of micro-controller, 80c196KC, and LAN controller, Am7990DC. To overcome the constraints of CPU performance and memory capacity, TCP/P protocol suite is simplified and informations needed to management were implemented in accordance with MIB(Management Information Base) specified in RFC. Also monitoring software is constructed by Visual Basic.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.188-190
• /
• 2005

In this study, a smart motor control and monitoring system is developed with an embedded board where Intel PXA255B CPU is mounted. Linux is ported into the embedded board as RTOS(Real Time Operating System), and the environment which communicate with a motor driver through serial protocol and is capable of controlling and monitoring the motor in real time is built in the system. A user friendly GUI is developed for the convenient operation of the system. Also, the environment which is able to control and monitor the motor driver remotely is built in the system using TCP/IP protocol.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.788-792
• /
• 1993

The objective of this study is to develope a satellite dynamic simulator, which can test and analyze the performance of spacecraft attitude control, antenna pointing instruments, communication equipments and spacecraft components under the space environment. The satellite simulator can be used to predict the events such as malfunction and failure of satellites in space during operation and can be used to protect against emergencies. At first, the performance test system of attitude control is investigated which can simulate motion and verify stability of spacecraft. Our system consists of an attitude control main processor and a sub-processor including some real hardwares such as attitude sensors and actuators. In this paper, we describe the procedure of designing and manufacturing the dynamic simulator hardware, which consists of the central processor board, the sub-processor board and the sun sensor, and also communication between the components.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2414-2417
• /
• 2005

Compact Camera Module(CCM) is widely used in PDA, Celluar phone and PC web camera. With the greatly increasing use for mobile applications, there has been a considerable demands for high speed production of CCM. The major burden of production of CCM is assembly of lens module onto CCD or CMOS packaged circuit board. After module is assembled, the CCM is inspected. In this paper, we developed the image capture board for CCM and the imaging processing algorithm to inspect the defects in captured image of assembled CCMs. The performances of the developed inspection system and its algorithm are tested on samples of 10000 CCMs. Experimental results reveal that the proposed system can focus the lens of CCM within 5s and we can recognize various types of defect of CCM modules with good accuracy and high speed.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2429-2431
• /
• 2004

In this paper, we have designed a remote controlable HDR System using all embedded linux board. The system is composed of three parts - a HDR System, a PC client program for remote control and a Nameserver for registering and aquisition of the IP address. The system is built in an embedded board using a linux kernel. With the Linux the system can support networking and file system for a hard disk management In addition, the system embeds a web-server and a ftp-server for remote manipulation and file transfer. And the hardwares of the system are controlled by the linux device driver mechanism. MPEG1/2 technique is used to compress TV tuner signal and external analog video/audio signal. And compressed data is stored in a hard disk. The data stored in the system is accesable through lan or internet. And RTP protocol is used to enable the system to service live stream of instant video/audio input.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.2
• /
• pp.229-235
• /
• 2003

We designed a family of completely autonomous mobile robots with local intelligence. Each robot has a number of on-board sensors, including vision, and does not rely on global positioning systems The on-board embedded controller is sufficient to analyze several low-resolution color images per second. This enables our robots to perform several complex tasks such as navigation, map generation, or providing intelligent group behavior. Not being limited to playing the game of soccer and being completely autonomous, we are also looking at a number of other interesting scenarios. The robots can communicate with each other, e.g. for exchanging positions, information about objects or just the local states they are currently in (e.g. sharing their current objectives with other robots in the group). We are particularly interested in the differences between a behavior-based approach versus a traditional control algorithm at this still very low level of action.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.844-849
• /
• 1991

A high speed control system for a telerobot using DSP is developed. The system is designed to resolve computational burden in advanced algorithms. The design is assumed to h ave no specific algorithm and robot configuration. The system is composed of a teaching box, a DSP board, a set of servo drivers and 16 bit microcomputer system. The teaching box is designed as a man-machine interface, which has two joysticks with three degrees of freedom for velocity generation in Cartesian space. The DSP board, i.e. DSP56000ADS based on a 10.25MIPS digital signal processor, DSP56001, computes the inverse Jacobian matrix which transforms Cartesian velocity into joint velocity. A resolved motion rate control algorithm for a 5 degrees of freedom manipulator was implemented. About 100 Hz sampling rate was achieved in this system.