• Journal of Photoscience
• /
• v.3 no.3
• /
• pp.147-151
• /
• 1996

Dynamics of contact ion-pair between 1, 2, 4, 5-tetracyanobenzene anion and cation of biphenyl derivatives was investigated on the picosecond time scale. Solvent effect on the electron transfer was observed and electron transfer rates were examined using Marcus equation which contains distance dependence of the electron transfer rate in the frequency factor, along with the consideration of molecular shape. From the discussion based on disk model for molecular shape, contribution of interring torsional motion of biphenyl to the inner-sphere reorganization energy is strongly suggested, which leads to the physical explanation for the observed solvent effect on the rate of electron transfer.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.199-200
• /
• 2002

Three-body abrasive wear resistance of mild steel, low alloy steel (Bisalloy) and 27%Cr white cast iron was investigated using a ball-cratering test. Glass beads, silica sand, quartz and alumina abrasive particles with sizes larger than $100{\mu}m$ were used to make slurries. It was found that the wear rates of all three materials tested increased with time when angular abrasive particles were used and were rather constant when round particles were used. This increase in wear rates was mainly due to the gradual increase in ball surface roughness with testing time. Abrasive particles with higher angularity caused higher ball surface roughness. Mild steel and Bisalloy were more affected by this ball surface roughness changes than the hard white cast iron. Generally, three-body rolling wear dominated. The contribution of two-body grooving wear increased when the ball roughness was significant. More grooves were found when round particles were used or the size of the particles was decreased.

• Journal of Mechanical Science and Technology
• /
• v.16 no.10
• /
• pp.1246-1252
• /
• 2002

Ultrafine grained (UFG) low carbon (0.15 wt.% C) steel produced by equal channel angula. pressing (ECAP) was tested for investigating the effect of load ratio on the fatigue crack growth rate. Fatigue crack growth resistance and threshold of UFG steel were lower than that of asreceived coarse grained steel. It was attributed to the less tortuous crack path. The UFG steel exhibited slightly higher crack growth rates and a lower △Kth with an increase of R ratio. The R ratio effect on crack growth rates and △Kth was basically indistinguishable at lower load ratio (R >0.3), compared to other alloys, which indicates that contribution of the crack closure vanishes. The crack growth rate curve for UFG steel exhibited a longer linear extension to the lower growth rate regime than that for the coarse grained as-received steel.

• Journal of Korea Foundry Society
• /
• v.9 no.3
• /
• pp.247-256
• /
• 1989

The gasification reaction rates by $CO_2$ in $CO/CO_2/N_2$ of various compositions in the temperature range of $900-1200^{\circ}C$ were measured for foundry coke and anthracite lump. The data for the rates was analyzed with Langmuir-Hinshelwood rate equations for the gasification of carbonaceous specimens. The values of the apparent activation energies of the reactions obtained from these data were ranged to be 47-99 and 73-128Kcal/mol respectively for foundry coke and for anthracite lump. The major contribution to decrease in tensile strength was shown to be attributable to the enlarging of the macropores in the coke and that of crack in the anthracite lump. Under the same experiment of the gasification of foundry coke, the rate of form coke was increasing as the addition of $Fe_2O_3$ increases.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.83-91
• /
• 1998

Cracking problems which high temperature plant components suffer during long-term service, occur very often at welded locations. The crack occurs due to accumulated creep damage near fusion line or at heat affected zone (HAZ). However, most of the studies on creep crack growth behavior have been performed with matrix metal not wit welded metal due to the difficulty of interpreting the test results. In this study, creep crack growth rates were measured with C(T) specimens whose cracks were formed along the fusion line or HAZ. The measured crack growth rates were characterized by {TEX}$C_{t}${/TEX}-parameter derived for elastic-primary-secondary creeping material. Since contribution of primary creep was significant for the tested 1Cr-0.5Mo steel, its effect was carefully studied. Effects of crack tip plasticity and material aging were also discussed.

• Journal of Radiation Protection and Research
• /
• v.30 no.4
• /
• pp.161-165
• /
• 2005

The gamma-ray dose rates in air at 233 locations in Korea have been determined. The contribution to the gamma-ray dose rates in air due to the presence of $^{232}Th-series,\;^{238}U-series\;and\;^{40}K$ is as follows: 47.3% $(36\;nGyh^{-1})\;^{232}Th-series$ 14.5% $(11\;nGyh^{-1})\;^{238}U-series$ and 38.2% $(29\;nGyh^{-1})\;^{40}K$. The mean gamma-ray dose rate theoretically derived from $^{232}Th-series,\;^{238}U-series\;and\;^{40}K\;was\;76{\pm}17\;nGyh^{-1}$. This corresponds to an annual effective dose of $410\;{\mu}Sv$ and an annual collective dose of 18900 person-Sv for all provinces under study. The results have been compared with other global radiation dose.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.653-655
• /
• 1996

A comparative molecular field analysis (CoMFA) was carried out for the correlation of the transition state structures and the reaction rates for the SN2 reaction of 4-nitrophenyl benzoate and its sulfur analogs with anionic nucleophiles. The CoMFA analysis showed that both steric and electrostatic effects are important, and the steric contribution increased when nucleophiles are alkoxides or arylsulfides. In this study, we have demonstrated that the CoMFA analysis can be expanded beyond the scope of dealing with reactants and products. The reactant complex and transition state conformations generated along the reaction path can be more appropriately used for the correlation of structures and reaction rates.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.511-517
• /
• 2003

An experiment is conducted to investigate the effect of air and water mass flow rates on cooling characteristics of mist impinging jet on a flat plate. The air mass flow rate ranges from 0.0 to 3.0 g/s, and water mass flow rates from 5.0 to 20.0 g/s. An air-atomizing nozzle is used fur the purpose of controlling air and water mass flow rates. The test section is designed distinctively from previous works to obtain local heat transfer coefficient distributions. Heat transfer characteristics of the mist impinging jet are explained with the aid of flow visualization. Surface temperature and heat transfer coefficient distributions become more uniform as air mass flow rate increases. The water flow rate provides substantial contribution to enhancement of cooling performance. On the other hand, The air mass flow rate weakly influences the averaged heat transfer rate when the water mass flow rate is low, but the averaged heat transfer rate Increases remarkably with the air mass flow rate in case of the high water mass flow rate.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.1
• /
• pp.205-221
• /
• 2021

Purpose: This paper is to determine whether automatic defibrillators (AEDs) deployed across communities make a contribution to prevent death in patients with acute cardiac arrest out-of-hospital. Methods: A total of 30,179 cases of cardiac arrest investigation data from the Korea Centers for Disease Control and Prevention was matched to those on emergency medical statistics drawn from annual report for the 2018 Central Emergency Medical Center, and statistics from the National Statistical Office in 2018. Results: Multiple logistic regression analyses revealed that availability of emergency medical resources across associated with different survival rates at emergency room after taking variability of the patient's personal characteristics and episodic situational characteristics held constant. The survival rate was 1.71 times higher for patients living in communities with more than 105 AEDs avaiable per 100,000 inhabitants than for those living in communities with less than 55 AEDs. Conclusion: The survival-related factors of patients with acute cardiac arrest that occurred out-of-hospital were found to be associated with patients' and episodic situational characteristics. The hospital stage were found to be associated with patients characteristics and episodic situational characteristics, The variability of AED available in a community has an impact on survival rate after emergency room treatment.

• Journal of Korea Trade
• /
• v.27 no.3
• /
• pp.103-118
• /
• 2023

Purpose - This study aims to examine the dynamic relationship between the variables impacted by the Regional Comprehensive Economic Partnership (RCEP) and the level of intra-industry trade among member states, with the ultimate objective of deducing the short- and long-term effects of RCEP on trade. Design/methodology - This study focuses on tariffs, GDP growth rates, and the proportion of regional FDI to total FDI as research variables, and employs a panel vector autoregression model and GMM-style estimator to investigate the dynamic relationship between RCEP and intra-industry trade among member countries. Findings - The study finds that the level of intra-industry trade between member states is positively impacted by both tariffs and intra-regional FDI. The impulse response graph shows that tariffs and FDI within the region can promote intra-industry trade among member countries, with a quick response. However, the contribution rates of tariffs and intra-regional FDI are not particularly high at approximately 1.5% and 1.4%, respectively. In contrast, the contribution rate of GDP growth can reach around 8.5%. This implies that the influence of economic growth rate on intra-regional trade in industries is not only long-term but also more powerful than that of tariffs and intra-regional FDI. Originality/value - The originality of this study lies in providing a new approach to investigating the potential impact of RCEP while avoiding the limitations associated with the GTAP model. Additionally, this study addresses existing gaps within the research, further contributing to the research merit of the study.