• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.115-121
• /
• 2018

Artificial neural network (ANN) simulation is used to predict the dynamic change of permeate flux during wheat starch industry wastewater microfiltration with and without static turbulence promoter. The experimental program spans range of a sedimentation times from 2 to 4 h, for feed flow rates 50 to 150 L/h, at transmembrane pressures covering the range of $1{\times}10^5$ to $3{\times}10^5Pa$. ANN predictions of the wastewater microfiltration are compared with experimental results obtained using two different set of microfiltration experiments, with and without static turbulence promoter. The effects of the training algorithm, neural network architectures on the ANN performance are discussed. For the most of the cases considered, the ANN proved to be an adequate interpolation tool, where an excellent prediction was obtained using automated Bayesian regularization as training algorithm. The optimal ANN architecture was determined as 4-10-1 with hyperbolic tangent sigmoid transfer function transfer function for hidden and output layers. The error distributions of data revealed that experimental results are in very good agreement with computed ones with only 2% data points had absolute relative error greater than 20% for the microfiltration without static turbulence promoter whereas for the microfiltration with static turbulence promoter it was 1%. The contribution of filtration time variable to flux values provided by ANNs was determined in an important level at the range of 52-66% due to increased membrane fouling by the time. In the case of microfiltration with static turbulence promoter, relative importance of transmembrane pressure and feed flow rate increased for about 30%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.330-330
• /
• 2016

The quantification of dry season evaporation in regions, where the magnitude of dry season flows is key to the regional water supply, is essential for good water management. Also, tree transpiration has a significant role in the water balance of a catchment whenever it is tree populated, especially in water limited environments. Such is the case in the Middle Mountains of Nepal where dry season flows play a significant role in downstream water provisioning and their proper functioning is key to the welfare of millions of people. This research seeks to study the transpiration of a pine forest stand in the Jikhu Khola Watershed in the Middle Mountains of Nepal. To the author's knowledge, no single study has been made so far to estimate the dry season evaporation from the planted forest stand in the Middle Mountains of Nepal. The study was carried out in planted pine forest embedded within the Jikhu Khola Catchment. Field campaigns of sap flow measurements were carried out from September, 2010 to February, 2011 in the selected plot of 15*15m dimension, to characterize dry season evaporation. This was done by measuring sap fluxes and sapwood areas over the six trees of different Diameter at Breast Height (DBH) classes. The sap flux was assessed using Granier's thermal dissipation probe (TDP) technique while sapwood area was determined using several incremental core(s) taken with a Pressler borer and immediately dyeing with methyl orange for estimating the actual depth of sapwood area. Transpiration of the plot was estimated by considering the contribution of each tree class. For this purpose, sap flux density, sapwood area and the proportion of total canopy area were determined for each tree class of the selected plot. From these data, hourly and diurnal transpiration rates for the plot were calculated for experimental period. Finally, Cienciala model was parameterized using the data recorded by the ADAS and other terrain data collected in the field. The calibrated model allowed the extrapolation of Sap flux density (v) over a six month period, from September 2010 to February 2011. The model given sap flux density was validated with the measured sap flux density from Grainier method.

• Membrane and Water Treatment
• /
• v.8 no.2
• /
• pp.171-184
• /
• 2017

This study presents the effect of hydraulic retention time (HRT) on the characteristics of emission of three major greenhouse gases (GHGs) including $CH_4$, $CO_2$ and $N_2O$ during operation of a sequencing batch reactor for aerobic oxidation of methane with denitrification (AeOM-D SBR). Dissolved $N_2O$ concentration increased, leveled-off and slightly decreased as the HRT increased from 0.25 to 1d. Concentration of the dissolved $N_2O$ was higher at the shorter HRT, which was highly associated with the lowered C/N ratio. A longer HRT resulted in a higher C/N ratio with a sufficient carbon source produced by methanotrophs via methane oxidation, which provided a favorable condition for reducing $N_2O$ formation. With a less formation of the dissolved $N_2O$, $N_2O$ emission rate was lower at a longer HRT condition due to the lower C/N ratio. Opposite to the $N_2O$ emission, emission rates of $CH_4$ and $CO_2$ were higher at a longer HRT. Longer HRT resulted in the greater total GHGs emission as $CO_2$ equivalent which was doubled when the HRT increased from 0.5d to 1.0 d. Contribution of $CH_4$ onto the total GHGs emission was most dominant accounting for 98 - 99% compared to that of $N_2O$ (< 2%).

• Nutrition Research and Practice
• /
• v.13 no.2
• /
• pp.159-168
• /
• 2019

BACKGROUND/OBJECTIVES: Over the past few decades, Malaysia has been experiencing an increased prevalence of overweight and obesity that threatens the health of Malaysians. Poor dietary intake is one of the major contributors to the development of obesity and many non-communicable diseases. The dietary intakes of adults in Malaysia were assessed to determine the association between the dietary intake variables and the body mass index (BMI) and waist circumference (WC) measurements. This study examined whether the dietary intake achieved the recommended nutritional guidelines and compared the intakes between both sexes. SUBJECTS/METHODS: The height, weight, and WC of four-hundred-and-ninety adults (n = 490) in Malaysia were measured using standard procedures. The three-day 24-hour dietary recalls were conducted on 422 out of the 490 adults and their dietary intakes were evaluated in detail. The selected dietary intake variables were used to determine the associations with the obesity indicators. RESULTS: Among the participants, 52.8% were overweight or obese. After data analysis, the mean energy intake was 1,550 kcal/day, in which male participants had a significantly higher energy and macronutrients intake than females. Protein consumption and its percentage of energy contribution exceeded the recommended range. The consumption of fruits, vegetables, and milk and milk products were lower than the recommended number of servings for a healthy diet. The male participants consumed significantly more servings of carbohydrate-based foods, meat, and fats, oils, and sweets than females. Among the selected dietary intake variables, only the carbohydrate intake was negatively associated with the BMI (Estimate b = -0.008) and WC measurements (Estimate b = -0.019) after adjusting for covariates. CONCLUSIONS: This study evaluated the dietary intakes of a sample of Malaysian adults and its association with the obesity indicators. The results highlight the need for improvements and modifications of the dietary intake of Malaysians to reduce the overweight and obesity rates.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.34-41
• /
• 2018

This paper studied balanced regional development focused on employment in Korea, by analyzing regional disparity between regional and industrial employment. A Gini-coefficient decomposition method and Panel Granger causality test were conducted, using raw data of the Census on Establishments reported by the Statistics Korea. The regional and industrial disparity of employment, based on the Gini-coefficient decomposition method, have increased by year. However, the growth rates of disparity are on the decrease. Most of employment disparity occurred from regional disparity between SMA (Seoul Metropolitan Area) and Non-SMA. Industrial disparity are occurred mainly by the service industry. The amount of contribution to the whole disparity of inter/intra regional employment was differed by each industrial sector. Also the causal relationship between employment growth of manufacture and that of service industry was analyzed by Panel Granger causality test. In national level, the employment growth in manufacture industry has conduced that in service industry. On the other hand, in the Non-SMA, only the employment growth in manufacture industry has augmented that in service industry. In conclusion, to reduce employment disparity, the strategy for balanced regional development should be emphasized. Different strategies are needed across regions and industries. Basically creating new job in the Non-SMA is inevitable. In view of stable employment, manufacture industry is more desirable rather than service industry.

• Journal of Technology Innovation
• /
• v.26 no.4
• /
• pp.98-121
• /
• 2018

This article analyzes the survival of Korean software firms from 1995 to 2015 by Cox regression model and product-limit method. The results show that survival rates are different for each sector: IT service, package software, game software and internet service. In addition, firm growth and investment in research and development positively affect software firm's survival, while slack resources negatively affect the software firm's survival. The implication of this study is that characteristics of the software industry and technologies should be taken into consideration in survival strategy of software firms and government policy. Previous research on survival analysis has been mainly conducted in the manufacturing industry or at the special circumstance such as the foreign exchange crisis of Korea in the late 1990s. The contribution of this study is that expanding the survival analysis to software firms in Korea which are becoming more important recently.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.2
• /
• pp.63-74
• /
• 2019

As the awareness of food security has increased, the Korean government has established national projects, such as Saemangeum proclaimed land, to secure sources of grain. Saemangeum is a large-scale agricultural area that was constructed to maintain preparedness for unstable food markets. This study aims to develop a $6^{th}$ Industrialization Model (SIM) for Saemangeum Grain Complex by applying feasible strategies to wheat and two-rowed barley which have low self-sufficiency rates. In addition, this study estimates the potential economic value of each development strategy associated with a sixth industrialization model to create higher added values from production, processing and tourism experiences. The strategic plan for primary, secondary, and tertiary industries is to combine cultivating and processing wheat and two-rowed barley for sales and linking them to tourism experience. This study shows value added from the combination of the primary, secondary and tertiary industry of wheat and two-rowed barley are 7.5 and 23.0 times more than those of the primary and tertiary industry combination, respectively. Through branding Saemangeum Grain Complex's products, such as Saemanguem bread and craft beer, would further enhance the economic benefits derived from the complex.

• New & Renewable Energy
• /
• v.18 no.3
• /
• pp.1-9
• /
• 2022

This study analyzed the anticipated supply-and-demand of forest biomass energy (through wood pellets) until 2050, in South Korea. Comparing the utilization rates of forest resources of five countries (United Kingdom, Germany, Finland, Japan, and S. Korea), it was found that S. Korea does not nearly utilize its forest resources for energy purposes. The total demand for wood pellets in S. Korea (based on a power generation efficiency of 38%) was predicted to be 3,629 and 4,371 thousand tons in 2034 and 2050, respectively. The anticipated total wood pellet power generation ratio to target power consumption is 1.13% (5,745 GWh), 1.17% (6,336 GWh), and 1.25% (7,631 GWh) in 2020, 2030, and 2050, respectively. Low value-added forest residues left unattended in forests are called "Unused Forest Biomass" in S. Korea. From the analysis, the total annual potential amount of raw material, sustainably collectible amount, and available amount of wood pellet in 2050 were estimated to be 6,877, 4,814, and 3,370 thousand tons, respectively. The rate of contribution to Nationally Determined Contributions was up to 0.64%. Through this study, the authors found that forest biomass energy will contribute to a carbon neutral society in the near future at the national level.

• Animal Bioscience
• /
• v.35 no.6
• /
• pp.804-813
• /
• 2022

Objective: A formula is needed that is practical for current livestock breeding methods and that predicts the approximate rate of inbreeding (ΔF) in populations where selection is performed according to four-path programs (sires to breed sons, sires to breed daughters, dams to breed sons, and dams to breed daughters). The formula widely used to predict inbreeding neglects selection, we need to develop a new formula that can be applied with or without selection. Methods: The core of the prediction is to incorporate the long-tern genetic influence of the selected parents in four-selection paths executed as sires to breed sons, sires to breed daughters, dams to breed sons, and dams to breed daughters. The rate of inbreeding was computed as the magnitude that is proportional to the sum of squared long-term genetic contributions of the parents of four-selection paths to the selected offspring. Results: We developed a formula to predict the rate of inbreeding in populations undergoing four-path selection on genomically enhanced breeding values and with discrete generations. The new formula can be applied with or without selection. Neglecting the effects of selection led to underestimation of the rate of inbreeding by 40% to 45%. Conclusion: The formula we developed here would be highly useful as a practical method for predicting the approximate rate of inbreeding (ΔF) in populations where selection is performed according to four-path programs.

• Atmosphere
• /
• v.33 no.4
• /
• pp.343-354
• /
• 2023

Turbulence produced on roadways is one of the major factors determining the dilution rates at the initial stage of traffic emissions of air pollutants and, thus, the distribution of air pollutants near the roadways. Field experiments were conducted on Gyeongbu Highway, one of the busiest highways in Korea, for 4~7 days in winter, spring, and summer. Two three-dimensional ultrasonic anemometers were installed on both sides of the highway to estimate turbulence intensities (vertical wind fluctuation and kinetic turbulence energy) induced by the roadway. Roadway-induced turbulence consists of three components: structural road-induced turbulence (S-RIT), thermal road-induced turbulence (T-RIT), and vehicle-induced turbulence (VIT). The contribution of T-RIT to the total RIT was insignificant (less than 10%), and the majority of RIT was S-RIT (by the highway embankment) and VIT. In this study, we propose the empirical relationships of VIT as a function of traffic density and wind speed under free-flow traffic conditions. Although this empirical relationship appears to underestimate the VIT, it can be applied to the air quality models easily because the relationship is simple and only needs readily obtainable input variables (wind speed and traffic information).