• Journal of Preventive Medicine and Public Health
• /
• v.25 no.3 s.39
• /
• pp.312-329
• /
• 1992

The purpose of this study is to estimate cesarean section rate in Korea and analyze the socioeconomic variables and health resources which affect regional variation in the rate. Samples were drawn from the record of vaginal and cesarean section deliveries based upon insurance claim bills which have been submitted to the National Federation of Medical Insurance for the first three months, January through March, 1991. The results are obtained as follows : It was found that. cesarean section rate was increasing rapidly up to 23.1% in 1991. Cesarean section per 10 thousand insured people was 4.8 and the number of cesarean section per 10 thousand insured eligible($15{\sim}49$ years old) female was 7.6. The fee for normal delivery was 109,489 won and that for cesarean section was 390,024 won. The average days of hospitalization in normal delivery was 2.3 days, and those in cesarean section was 7.6 days. On the average cesarean section has a longer of stay as much as by 4.3 days and cost 3.6 times more than normal deliveries. Cesarean section rates vary among medical facilities 19.8% at clinics 37.6% in small-scale hospitals, and 29.1% in general hospitals. The regional variation of cesarean section rates was also fairly prominent. The South Cheju Gun has the highest rate of cesarean section, 56.2%. Meanwhile no cesarean section cases has been reported in Sunchang Gun during the period of this study. The variation is noted among provinces. The rate for Cheju province has been 3.4 times higher than that for Chunnam. The number of cesarean section per 10 thousand insured people vary greatly among regions, too. This study has found that there exists significant regional variations among various geographic units in terms of average length of stay, average cost, number of obsretricians and number of beds. Multiple regression analysis was done to identify factors explaining the regional variance of various cesarean section rates : In the urban areas, no significant explaining variables were noted except the number of beds for the dependent variable of cesarean section cases per 10 thousand insured eligible females. The smaller the number of bed, the more cases of cesarean section was noted for an urban area. The is mostly because the rate of cesarean section is higher in medium-size hospitals than in large general hospitals. In the rural areas, the factor of education has been found significant for all three deplendent variables. The higher the educational level, the rate of cesarean section is most likely to rise. An income variable measured by the amount of monthly insurance contribution has been identified a powerful predictor in explaining the valiance of cesarean section rates. The same has been noted for the number of obstetricians. Similar findings are observed for the country as a whole. The income level has veen found as the most powerful explaining factor in the regional variance of cesarean section rates. In general the rate is higher in the urban areas, and lower in the area with more small hospitals. As this is the initial attempt to identify the factors relevant to the regional difference in the rates of cesarean section, more elaborated study is urgently required.

• Korean Journal of Hospice Care
• /
• v.8 no.1
• /
• pp.1-12
• /
• 2008

Perpose: The purpose of this study was to investigate the perception of death between Korean and Chinese nursing students. And it will help develop curriculum for preparing death, the quality of hospice care, as well as nursing education and practice. Methods: Data was collected from 492 nursing students participated(248 Korean and 244 Chinese) by questionnaire designed for examining Death Orientation (Thorson & Powell, 1988). They were analyzed using Cronbach's Alpha coefficients, factor analysis, t-test, ANOVA and regression analysis (SPSS; win 12.0 version) Results: More than half of the Korean nursing students followed a religion (58.5%) while the majority of Chinese nursing students did not follow a religion (93.9%). In the view of the afterlife, nursing students in China had two views. 'I really don't know what happens after a person dies (30.3%)' and ‘There is no afterlife and death is the end (29.5%)’. On the other hand the Korean nursing students’ answer were, 'After dying, a person goes to heaven or hell (27.3%)' and 'I really don't know what happens after a person dies. (22.9%)' The study also found that the average of 25 items in Death Orientation is 2.36points of nursing students in Korea and 2.50points of nursing students in China. This means that the concern, anxiety and fear were of the middle level for the Chinese Students and were higher than Korean students (t=3.51, p=.000). In the low factor of death orientation, those in Korea had higher 'anxiety of burden to family' than those in China (t=-3.50, p=.001). The nursing students in China had higher 'anxiety of the unknown (t=4.96, p=.000)', 'fear of suffering (t=6.88, p=.000), 'fear of extinction body and life (t=5.20, p=.000), 'fear of lost self-control(t=2.12, p=.034)', and 'anxiety of future existence and nonexistence (t=2.33, p=.020)' than those in Korea. There was no statistically significant difference for the 'concern of body and fear of identity lost' category. The death orientation of Korean nursing students had statistically significant differences according to age (t=3.20, p=.002), religion (t=2.56, p=.011), and afterlife (F=4.64, p=.000). The contribution of Death Orientation had a statistically significant difference, the afterlife variable (0.735, p=0.001). The death orientation of Chinese nursing students did not have any statistically significant differences. Conclusion: In conclusion, there were differences in death orientation between Korean and Chinese nursing students. In particular, those who believed in afterlife showed acceptance of death. The results of this study suggest that nursing curricula should include education program on death and spiritual nursing. Additional studies are needed to establish death education in China with careful considerations on Chinese policies, cultures and social systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.828-836
• /
• 2010

This study was conducted to evaluate soil erosion risk with a standard unit watershed in the upper Han river basin using the spatial soil erosion map according to the change of landuse. The study area is 14,577 $km^2$, which consists of 10 subbasins, 107 standard unit watersheds. Total annual soil loss and soil loss per area estimated were $895{\times}10^4\;Mg\;yr^{-1}$ and 6.1 Mg $ha^{-1}\;yr^{-1}$, respectively. A result of analysis with a subbasin as a unit showed that annual soil losses and soil loss per area in Namhan river basins was more than in Bukhan river ones. Predicted annual soil loss according to the landuse ranked as Forest & Grassland > Upland ${\gg}$ Urban & Fallow area > Paddy field > Orchard. Upland area covered 6.2% of the study area, but the contribution of total annul soil loss was 40.6% and that of Forest & Grassland was 44.2%. As a evaluation of soil erosion risk using the spatial soil erosion map, we could precisely conformed the potential hazardous region of soil erosion in each unit watersheds. The ratio of regions, graded as higher "Moderate" for annual soil loss, were respectively 8.7%, 7.9% and 7.8% in 1001, 1002 and 1003 subbasins in Namhan river basin. Most landuse of these area was upland, and these area is necessary to establish soil conservation practices to reduce soil erosion based on the field observation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.354-363
• /
• 2007

In order to investigate the optimum rate and interval of silicate fertilizer application for rice cultivation, Chucheong byeo variety, one of commonly cultivated rice cultivar in Korea was planted on two different wetland rice soils located on Hwaseong-si from 2002 to 2005; Jisan series(a member of the fine loamy, mixed, mesic family of Fluvaquentic Endoaquepts), known as "Productive Paddy Soil", without any conspicuous limiting factor, and Seokcheon series (a member of the coarse loamy, mixed, nonacid, mesic family of Fluvaquentic Endoaquetps), known as "Sandy Paddy Soil", sandiness being major limiting factor. There were three rate treatments of silicate fertilizer application; the amount of silicate fertilizers needed to adjust the available soil silicate contents to 130, 200, and $270mg\;kg^{-1}$ was applied, in the first year only. There was an additional plot; applying the amount of silicate fertilizer needed to adjust soil available silicate to 130 ppm every year, which would serve as the base for the evaluation of residual effects of silicate fertilizers in the plots where different rates of silicate fertilizer were applied. From the yield data in first year, it was found that optimum available silica in the soil are $154mg\;kg^{-1$ and $160mg\;kg^{-1}$, in Jisan and Seogcheon soils, respectably. The duration of residual effects of silicate fertilizer was different depending upon the amount of applied silicate fertilizers and the soils. The higher the application rate, the residual effect lasted longer, and the residual effect was lasted longer in Jisan(clay loam) soil than in Seogcheon(sandy loam) soil. During four years, sum of the rate of contribution to increase available soil silica of applied silicate fertilizer in different soils ranged 18.6% and 24.1% in Jisan soil and Seogcheon soil, respectively. This may suggest that much portion of applied silicate would be either lost from the soil or remain in the soil as insoluble form. This deserves further study.

• Journal of Venture Innovation
• /
• v.7 no.3
• /
• pp.65-84
• /
• 2024

This study confirms the relative influence of satisfaction with the government's start-up support project at each growth stage of start-up companies and entrepreneurs' commercialization capabilities on start-up commitment. The start-up growth stage was divided into start-up stage, initial growth stage, stagnation stage, and high growth stage, and the government's start-up support project was divided into eight types(entrepreneurship education, mentoring/consulting, facility space, commercialization support, policy funds, sales channels/marketing/overseas expansion, R&D support, and start-up events/network) and satisfaction was evaluated. The data used was the results of the Daegu Creative Economy Innovation Center's survey on entrepreneurship conditions. As a result of the analysis, it was confirmed that the entrepreneur's commercialization capabilities are more effective in increasing the entrepreneur's commitment to starting a business than the satisfaction with the government's start-up support project. Additionally, it was confirmed that relatively important factors in entrepreneurship immersion differ depending on the start-up stage. During the start-up period, the government's start-up support project was found to be an important factor in increasing entrepreneurs' commitment to starting a business, but it was confirmed that the government's start-up support project had no effect on the start-up commitment after the start-up growth stage. In addition, this study confirmed the relatively important government start-up support projects by start-up growth stage and found that satisfaction with start-up facilities can increase start-up commitment during the start-up stage, and that start-up facilities and commercialization support are important during the early growth stage. And in the Death Valley stage, startup facilities, commercialization support, and policy funds were confirmed to be relatively important factors, and in the high growth stage, mentoring was confirmed to be an important factor in increasing entrepreneurship immersion. The results of this study not only contribute theoretically to building entrepreneurship theory, but also determine the size and effective support plan for the government's entrepreneurship support project for each growth stage of startup companies, and help organizations that operate entrepreneurship policy and institutional support and startup support programs. It will have a significant contribution to management measures.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.2
• /
• pp.31-54
• /
• 2007

The exchange between buyers and sellers in the industrial market is changing from short-term to long-term relationships. Long-term relationships are governed mainly by formal contracts or informal agreements, but many scholars are now asserting that controlling relationship by using formal contracts under environmental dynamism is inappropriate. In this case, partners will depend on each other's flexibility or interdependence. The former, flexibility, provides a general frame of reference, order, and standards against which to guide and assess appropriate behavior in dynamic and ambiguous situations, thus motivating the value-oriented performance goals shared between partners. It is based on social sacrifices, which can potentially minimize any opportunistic behaviors. The later, interdependence, means that each firm possesses a high level of dependence in an dynamic channel relationship. When interdependence is high in magnitude and symmetric, each firm enjoys a high level of power and the bonds between the firms should be reasonably strong. Strong shared power is likely to promote commitment because of the common interests, attention, and support found in such channel relationships. This study deals with environmental dynamism in high-tech industry. Firms in the high-tech industry regard it as a key success factor to successfully cope with environmental changes. However, due to the lack of studies dealing with environmental dynamism and supply chain commitment in the high-tech industry, it is very difficult to find effective strategies to cope with them. This paper presents the results of an empirical study on the relationship between environmental dynamism and supply chain commitment in the high-tech industry. We examined the effects of consumer, competitor, and technological dynamism on supply chain commitment. Additionally, we examined the moderating effects of flexibility and dependence of supply chains. This study was confined to the type of high-tech industry which has the characteristics of rapid technology change and short product lifecycle. Flexibility among the firms of this industry, having the characteristic of hard and fast growth, is more important here than among any other industry. Thus, a variety of environmental dynamism can affect a supply chain relationship. The industries targeted industries were electronic parts, metal product, computer, electric machine, automobile, and medical precision manufacturing industries. Data was collected as follows. During the survey, the researchers managed to obtain the list of parts suppliers of 2 companies, N and L, with an international competitiveness in the mobile phone manufacturing industry; and of the suppliers in a business relationship with S company, a semiconductor manufacturing company. They were asked to respond to the survey via telephone and e-mail. During the two month period of February-April 2006, we were able to collect data from 44 companies. The respondents were restricted to direct dealing authorities and subcontractor company (the supplier) staff with at least three months of dealing experience with a manufacture (an industrial material buyer). The measurement validation procedures included scale reliability; discriminant and convergent validity were used to validate measures. Also, the reliability measurements traditionally employed, such as the Cronbach's alpha, were used. All the reliabilities were greater than.70. A series of exploratory factor analyses was conducted. We conducted confirmatory factor analyses to assess the validity of our measurements. A series of chi-square difference tests were conducted so that the discriminant validity could be ensured. For each pair, we estimated two models-an unconstrained model and a constrained model-and compared the two model fits. All these tests supported discriminant validity. Also, all items loaded significantly on their respective constructs, providing support for convergent validity. We then examined composite reliability and average variance extracted (AVE). The composite reliability of each construct was greater than.70. The AVE of each construct was greater than.50. According to the multiple regression analysis, customer dynamism had a negative effect and competitor dynamism had a positive effect on a supplier's commitment. In addition, flexibility and dependence had significant moderating effects on customer and competitor dynamism. On the other hand, all hypotheses about technological dynamism had no significant effects on commitment. In other words, technological dynamism had no direct effect on supplier's commitment and was not moderated by the flexibility and dependence of the supply chain. This study makes its contribution in the point of view that this is a rare study on environmental dynamism and supply chain commitment in the field of high-tech industry. Especially, this study verified the effects of three sectors of environmental dynamism on supplier's commitment. Also, it empirically tested how the effects were moderated by flexibility and dependence. The results showed that flexibility and interdependence had a role to strengthen supplier's commitment under environmental dynamism in high-tech industry. Thus relationship managers in high-tech industry should make supply chain relationship flexible and interdependent. The limitations of the study are as follows; First, about the research setting, the study was conducted with high-tech industry, in which the direction of the change in the power balance of supply chain dyads is usually determined by manufacturers. So we have a difficulty with generalization. We need to control the power structure between partners in a future study. Secondly, about flexibility, we treated it throughout the paper as positive, but it can also be negative, i.e. violating an agreement or moving, but in the wrong direction, etc. Therefore we need to investigate the multi-dimensionality of flexibility in future research.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.7-16
• /
• 1985

To grasp canonical correlations, their related backgrounds in various growth factors of stem, the characteristics of stem by synthetical dispersion analysis, principal component analysis and canonical correlation analysis as optimum method were applied to Larix leptolepis. The results are as follows; 1) There were high or low correlation among all factors (height ($x_1$), clear height ($x_2$), form height ($x_3$), breast height diameter (D. B. H.: $x_4$), mid diameter ($x_5$), crown diameter ($x_6$) and stem volume ($x_7$)) except normal form factor ($x_8$). Especially stem volume showed high correlation with the D.B.H., height, mid diameter (cf. table 1). 3) (1) Canonical correlation coefficients and canonical variate between stem volume and composite variate of various height growth factors ($x_1$, $x_2$ and $x_3$) are ${\gamma}_{u1,v1}=0.82980^{**}$, $\{u_1=1.00000x_7\\v_1=1.08323x_1-0.04299x_2-0.07080x_3$. (2) Those of stem volume and composite variate of various diameter growth factors ($x_4$, $x_5$ and $x_6$) are ${\gamma}_{u1,v1}=0.98198^{**}$, $\{{u_1=1.00000x_7\\v_1=0.86433x_4+0.11996x_5+0.02917x_6$. (3) And canonical correlation between stem volume and composite variate of six factors including various heights and diameters are ${\gamma}_{u1,v1}=0.98700^{**}$, $\{^u_1=1.00000x_7\\v1=0.12948x_1+0.00291x_2+0.03076x_3+0.76707x_4+0.09107x_5+0.02576x_6$. All the cases showed the high canonical correlation. Height in the case of (1), D.B.H. in that of (2), and the D.B.H, and height in that of (3) respectively make an absolute contribution to the canonical correlation. Synthetical characteristics of each qualitative growth are largely affected by each factor. Especially in the case of (3) the influence by the D.B.H. is the most significant in the above six factors (cf. table 2). 3) Canonical correlation coefficient and canonical variate between composite variate of various height growth factors and that of the various diameter factors are ${\gamma}_{u1,v1}=0.78556^{**}$, $\{u_1=1.20569x_1-0.04444x_2-0.21696x_3\\v_1=1.09571x_4-0.14076x_5+0.05285x_6$. As shown in the above facts, only height and D.B.H. affected considerably to the canonical correlation. Thus, it was revealed that the synthetical characteristics of height growth was determined by height and those of the growth in thickness by D.B.H., respectively (cf. table 2). 4) Synthetical characteristics (1st-3rd principal component) derived from eight growth factors of stem, on the basis of 85% accumulated proportion aimed, are as follows; Ist principal component ($z_1$): $Z_1=0.40192x_1+0.23693x_2+0.37047x_3+0.41745x_4+0.41629x_5+0.33454x_60.42798x_7+0.04923x_8$, 2nd principal component ($z_2$): $z_2=-0.09306x_1-0.34707x_2+0.08372x_3-0.03239x_4+0.11152x_5+0.00012x_6+0.02407x_7+0.92185x_8$, 3rd principal component ($z_3$): $Z_3=0.19832x_1+0.68210x_2+0.35824x_3-0.22522x_4-0.20876x_5-0.42373x_6-0.15055x_7+0.26562x_8$. The first principal component ($z_1$) as a "size factor" showed the high information absorption power with 63.26% (proportion), and its principal component score is determined by stem volume, D.B.H., mid diameter and height, which have considerably high factor loading. The second principal component ($z_2$) is the "shape factor" which indicates cubic similarity of the stem and its score is formed under the absolute influence of normal form factor. The third principal component ($z_3$) is the "shape factor" which shows the degree of thickness and length of stem. These three principal components have the satisfactory information absorption power with 88.36% of the accumulated percentage. variance (cf. table 3). 5) Thus the principal component and canonical correlation analyses could be applied to the field of forest measurement, judgement of site qualities, management diagnoses for the forest management and the forest products industries, and the other fields which require the assessment of synthetical characteristics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.124-136
• /
• 2002

As an official journal of the Asian-Australasian Association of Animal Production Societies (AAAP), the Asian-Australasian Journal of Animal Sciences (AJAS) was born in February 1987 and the first issue (Volume 1, Number 1) was published in March 1988 under the Editorship of Professor In K. Han (Korea). By the end of 2001, a total of 84 issues in 14 volumes and 1,761 papers in 11,462 pages had been published. In addition to these 14 volumes, a special issue entitled "Recent Advances in Animal Nutrition" (April, 2000) and 3 supplements entitled "Proceedings of the 9th AAAP Animal Science Congress" (July, 2000) were also published. Publication frequency has steadily increased from 4 issues in 1988, to 6 issues in 1997 and to 12 issues in 2000. The total number of pages per volume and the number of original or review papers published also increased. Some significant milestones in the history of the AJAS include that (1) it became a Science Citation Index (SCI) journal in 1997, (2) the impact factor of the journal improved from 0.257 in 1999 to 0.446 in 2000, (3) it became a monthly journal (12 issues per volume) in 2000, (4) it adopted an English editing system in 1999, and (5) it has been covered in "Current Contents/Agriculture, Biology and Environmental Science since 2000. The AJAS is subscribed by 842 individuals or institutions. Annual subscription fees of US$ 50 (Category B) or US$ 70 (Category A) for individuals and US$ 70 (Category B) or US$ 120 (Category A) for institutions are much less than the actual production costs of US$ 130. A list of the 1,761 papers published in AJAS, listed according to subject area, may be found in the AJAS homepage (http://www.ajas.snu.ac.kr) and a very well prepared "Editorial Policy with Guide for Authors" is available in the Appendix of this paper. With regard to the submission status of manuscripts from AAAP member countries, India (235), Korea (235) and Japan (198) have submitted the most manuscripts. On the other hand, Mongolia, Nepal, and Papua New Guinea have never submitted any articles. The average time required from submission of a manuscript to printing in the AJAS has been reduced from 11 months in 1997-2000 to 7.8 months in 2001. The average rejection rate of manuscripts was 35.3%, a percentage slightly higher than most leading animal science journals. The total number of scientific papers published in the AJAS by AAAP member countries during a 14-year period (1988-2001) was 1,333 papers (75.7%) and that by non- AAAP member countries was 428 papers (24.3%). Japanese animal scientists have published the largest number of papers (397), followed by Korea (275), India (160), Bangladesh (111), Pakistan (85), Australia (71), Malaysia (59), China (53), Thailand (53), and Indonesia (34). It is regrettable that the Philippines (15), Vietnam (10), New Zealand (8), Nepal (2), Mongolia (0) and Papua New Guinea (0) have not actively participated in publishing papers in the AJAS. It is also interesting to note that the top 5 countries (Bangladesh, India, Japan, Korea and Pakistan) have published 1,028 papers in total indicating 77% of the total papers being published by AAAP animal scientists from Vol. 1 to 14 of the AJAS. The largest number of papers were published in the ruminant nutrition section (591 papers-44.3%), followed by the non-ruminant nutrition section (251 papers-18.8%), the animal reproduction section (153 papers-11.5%) and the animal breeding section (115 papers-8.6%). The largest portion of AJAS manuscripts was reviewed by Korean editors (44.3%), followed by Japanese editors (18.1%), Australian editors (6.0%) and Chinese editors (5.6%). Editors from the rest of the AAAP member countries have reviewed slightly less than 5% of the total AJAS manuscripts. It was regrettably noticed that editorial members representing Nepal (66.7%), Mongolia (50.0%), India (35.7%), Pakistan (25.0%), Papua New Guinea (25.0%), Malaysia (22.8%) and New Zealand (21.5%) have failed to return many of the manuscripts requested to be reviewed by the Editor-in-Chief. Financial records show that Korea has contributed the largest portion of production costs (68.5%), followed by Japan (17.3%), China (8.3%), and Australia (3.5%). It was found that 6 AAAP member countries have contributed less than 1% of the total production costs (Bangladesh, India, Indonesia, Malaysia, Papua New Guinea and Thailand), and another 6 AAAP member countries (Mongolia, Nepal and Pakistan, Philippine and Vietnam) have never provided any financial contribution in the form of subscriptions, page charges or reprints. It should be pointed out that most AAAP member countries have published more papers than their financial input with the exception of Korea and China. For example, Japan has published 29.8% of the total papers published in AJAS by AAAP member countries. However, Japan has contributed only 17.3% of total income. Similar trends could also be found in the case of Australia, Bangladesh, India, Indonesia, Malaysia and Thailand. A total of 12 Asian young animal scientists (under 40 years of age) have been awarded the AJAS-Purina Outstanding Research Award which was initiated in 1990 with a donation of US$ 2,000-3,000 by Mr. K. Y. Kim, President of Agribrands Purina Korea Inc. In order to improve the impact factor (citation frequency) and the financial structure of the AJAS, (1) submission of more manuscripts of good quality should be encouraged, (2) subscription rate of all AAAP member countries, especially Category B member countries should be dramatically increased, (3) a page charge policy and reprint ordering system should be applied to all AAAP member countries, and (4) all AAAP countries, especially Category A member countries should share more of the financial burden (advertisement revenue or support from public or private sector).

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.108-118
• /
• 2009

Statement of problem: Volume stability, microstructure reproducibility and fluidity along with compatibility with dental stone must be in consideration in order to use tissue conditioner as a material for functional impression. There are few studies concerning the influence of time factor in oral condition on surface roughness of the stone and optimal retention period in the oral cavity considering such changes in surface roughness. Purpose: The purpose of this study was to find out the influence of various kinds of tissue conditioner, its powder/liquid ratio and immersion time on surface roughness of the stone. Material and methods: Materials used in this study were the three kinds of tissue conditioners(Coe-Comfort, Visco-Gel, Soft-Liner) and were grouped into three: group R-mixed with standard powder/liquid ratio that was recommended by the manufacturers, group M-mixed with 20% more powder, group L-mixed with 20% less powder. Specimens were made with the size of 20 mm diameter and 2 mm width. Each tissue conditioner specimens were subdivided into 5 groups according to the immersion time(0 hour, 1 day, 3 days, 5 days, 7 days), completely immersed into artificial saliva and were stored under $37^{\circ}C$. Specimens of which the given immersion time elapsed were taken out and were poured with improved stone, making the stone specimens. Surface roughness of the stone specimens was measured by a profilometer. Results: Within the limitation of this study, the following results were drawn. 1. Major influencing factor on surface roughness of the stone model made from tissue conditioner was the retention period(contribution ratio($\rho$)=62.86%, P<.05) of the tissue conditioner in oral cavity to make functional impression. 2. In case of Coe-Comfort, higher mean surface roughness value of the stone model with statistical significance was observed compared to that of Soft-Liner and Visco-Gel as immersion time changes(P<.05). 3. In case of group L(less), higher mean surface roughness value of the stone model with statistical significance was observed compared to that of R(recommended) and M(more) group as immersion time changes(P<.05). Conclusion: We may conclude that as the retention period of time in oral cavity influences surface roughness of the stone model the most and as the kind of tissue conditioner and its P/L ratio may influence also, clinician should well understand the optimal retention period in oral cavity and choose the right tissue conditioner for the functional impression, thus making the functional impression with tissue conditioner usefully.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.4
• /
• pp.1-12
• /
• 2014

It is essential factor for business operation to raise funds effectively. However, in Korea, many start-ups and small businesses have difficulties in fund-raising. In recent years, crowdfunding, a new method for funding a project of individuals or organizations by raising monetary contributions from a large number of people, has been growing up simultaneously with diffusion of social media. Crowdfunding is on early stage in Korea, and the majority of projects are focused on cultural or art categories. There is high proportion of projects that have social value in start-up sector. Crowdfunding in Korea has great potential because success rate of it is much higher than its of advanced countries, although market size is much smaller than them. The purpose of this paper is to propose success strategies of crowdfunding for start-up through case study. 5 crowdfunding platforms of Korea and Kickstarter, the platform of United States were investigated. Then we checked the figures related to the operation of the whole Korean projects on start-up. Finally, we made comparison between the cases of success and failure by analyzing 8 project characteristics. The study shows that it were the differences in trustworthiness and activeness of project creator, value of reward and efforts for interactivity that have great effects on success of the project. Whereas there was no significant influence of societal contribution and sponsor engagement. The thesis provides success strategies of crowdfunding for start-up as follows. Firstly, creator of the project should make support base by enthusiastic activites before launching funding project. Secondly, there should be contents that can easily show the process of business development in the project information. Thirdly, there must be appropriate design of rewards for each amounts of support money. Finally, efforts for interactivity, such as frequent updates, response for comments and SNS posting, should be followed after the launch of the project.