• Title/Summary/Keyword: contrast

Search Result 13,425, Processing Time 0.055 seconds

Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines (정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구)

  • No, Sang-Ha
    • Journal of Biosystems Engineering
    • /
    • v.1 no.1
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines (정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • v.1 no.1
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

Characteristics of Spatio-temporal Variation of the Water Quality in the Lower Keum River (금강 하류역에서 수질의 시공간적 변화특성)

  • YANG Han-Soeb;KIM Seong-Soo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.23 no.3
    • /
    • pp.225-237
    • /
    • 1990
  • Various chemical constituents were measured from April to August 1988 at the down-ward 20 stations of Keum River, which is located in the Midwest of Korea, to understand the characteristics of water quality with respect to spatio-temporal variations of each constituent. The 24-hrs continuous measurements with 2-hrs interval were made simultaneously at station 2 near the estuary weir and station 9(Ganggyeong) of 35 km upstream from the weir in April. By the results observed for one day in April at station 2, salinity has a range of $7.88\~22.14\%_{\circ}$ and its temporal variability is identical to the pattern of tidal cycle in the neigh-bouring Kunsan Harbor. However, turbidity shows relatively high values only at an interval of 4~5 hours after the lowest salinity time, though hourly fluctuation of pH is very small. Silicate and dissolved inorganic nitrogen have inversively linear correlationships with salinity, implying the concentration of the two nutrients strongly regulated by estuarine mixing of sea and river waters. In contrast, phosphate sustains roughly a constant level over a wide salinity range and distinctly lower values than those corresponding to nitrate in the oceans. Such distributions of phosphate have been observed in some estuaries, and interpreted as driven by removal of dissolved phosphate into bottom sediments and the bufforing of phosphate by particulate matter. COD values at station 2 are relatively high in day-time(particularly afternoon) and in high-salinity periods. At station 9, saltwater intrusion was never found but water level changed to the extent of 2.5 m for one day. Although each parameter at this station exhibits very slight variations in their abundance for 24 hours compared with station 2, the contents of COD, silicate and ammonia are significantly higher than at station 2. Concentration of suspended matter is relatively high in the brackish water region up to $\~20$ km above the river mouth, probably due to strong tidal stirring of the bottom de-posits. Also, relatively high pH, COD and $O_2$ saturation at the upward stations of $40\~50$ km from the weir are presumably attributable to active photosynthesis of plants in the region. In general, COD and nutrients except phosphate are higher values at the upper stations than in the estuary zone, and show the highest abundances in July nearly at all stations. Finally, in the estuarine region tidal mixing of sea-river waters seems to be an important factor controlling the distributions of turbidity, COD, silicate and nitrate as well as salinity. However, water quality in the upward fresh-water zone is remarkably variable according to months or seasons.

  • PDF

A Study on Air Operator Certification and Safety Oversight Audit Program in light of the Convention on International Civil Aviation (시카고협약체계에서의 항공안전평가제도에 관한 연구)

  • Lee, Koo-Hee;Park, Won-Hwa
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.28 no.1
    • /
    • pp.115-157
    • /
    • 2013
  • Some contracting States of the Convention on International Civil Aviation (commonly known as the Chicago Convention) issue FAOC(Foreign AOC and/or Operations Specifications) and conduct various safety audits for the foreign operators. These FAOC and safety audits on the foreign operators are being expanded to other parts of the world. While this trend is the strengthening measure of aviation safety resulting in the reduction of aircraft accident, it is the source of concern from the legal as well as economic perspectives. FAOC of the USA doubly burdens the other contracting States to the Chicago Convention because it is the requirement other than that prescribed by the Chicago Convention of which provisions are faithfully observed by almost all the contracting States. The Chicago Convention in its Article 33 stipulates that each contracting State recognize the validity of the certificates of airworthiness and licenses issued by other contracting States as long as they meet the minimum standards of the ICAO. Consequently, it is submitted that the unilateral action of the USA, China, Mongolia, Australia, and the Philippines issuing the FOAC to the aircraft of other States is against the Convention. It is worry some that this breach of international law is likely to be followed by the European Union which is believed to be in preparation for its own unilateral application. The ICAO established by the Chicago Convention to be in charge of safe and orderly development of the international civil aviation has been in hard work to both upgrade and emphasize the safe operation of aircraft. As the result of these endeavors, it prepared a new Annex 19 to the Chicago Convention with the title of "Safety Management" and with the applicable date 14 November 2013. It is this Annex and other ICAO documents relevant to the safety that the contracting States to the Chicago Convention have to observe. Otherwise, it is the economical burden due to probable delay in issuing the FOAC and bureaucracies combined with many different paperworks and regulations depending on where the aircraft is flown. It is exactly to avoid this type of confusion and waste that the Chicago Convention aimed at when it was adopted in 1944. The State of the operator shall establish a system for both the certification and the continued surveillance of the operator in accordance with ICAO SARPs to ensure that the required standards of operations are maintained. Certainly the operator shall meet and maintain the requirements established by the States in which it operate. The authority of a State stops where the authority of another State intervenes or where the former has yielded its power by an international agreement for the sake of international cooperation. Hence, it is not within the realm of the State to issue FAOC towards foreign operators for the reason that these foreign operators are flying in and out of the State. Furthermore, there are other safety audits such as ICAO USOAP, IATA IOSA, FAA IASA, and EU SAFA that assure the safe operation of the aircraft, but within the limit of their power and in compliance with the ICAO SARPs. If the safety level of any operator is not satisfactory, the operator could be banned to operate in the contracting States with watchful eyes until the ICAO SARPs are met. This time-honoured practice has been applied without any serious problems. Besides, we have the new Annex 19 to strengthen and upgrade with easy reference for contracting States. We don't have no reason to introduce additional burden to the States by unilateral actions of some States. These actions have to be corrected. On the other hand, when it comes to the carriage of the Personal or Pilot Log Book, the Korean regulation requiring it is in contrast with other relevant provisions of USA, USOAP, IOSA, and SAFA. The Chicago Convention requires in its Articles 29 and 34 only the carriage of the Journey Log Book and some other certificates, but do not mention the Personal Log Book at all. Paragraph 5.1.1.1 of Annex 1 to the Chicago Convention even makes it clear that the carriage in the aircraft of the Personal Log Book is not required on international flights. The unique Korean regulation in this regards giving the unnecessary burden to the national flag air carriers has to be lifted at once.

  • PDF

Effect of FK506 and Cyclosporin A on $I{\kappa}B{\alpha}$ Degradation and $IKK{\alpha}$ Pathway in Bronchial Epithelial Cells, Monocytes, Lymphocytes and Alveolar Macrophages (FK506과 cyclosporin A가 기관지상피세포, 단핵구, 림프구 및 폐포대식세포에서 $I{\kappa}B{\alpha}$ 분해 및 $IKK{\alpha}$ 활성에 미치는 효과)

  • Yoon, Ho Il;Lee, Chang-Hoon;Lee, Hee-Seok;Lee, Choon-Taek;Kim, Young Whan;Han, Sung Koo;Shim, Young-Soo;Yoo, Chul-Gyu
    • Tuberculosis and Respiratory Diseases
    • /
    • v.54 no.4
    • /
    • pp.449-458
    • /
    • 2003
  • Background : Cyclosporin A(CsA) and tacrolimus(FK506) have been widely used as immunosuppressants. The effects of CsA, or FK506, on the $I{\kappa}B/NF-{\kappa}B$ pathway have been shown to vary according to the cell type. However, their effects on the $I{\kappa}B/NF-{\kappa}B$ pathway have not been reported in bronchial epithelial cells. In this study, the effects of CsA and FK506 on the $I{\kappa}B/NF-{\kappa}B$ pathway in bronchial epithelial cells, monocytes, lymphocytes and alveolar macrophages were evaluated. The relationship between their effects on the $I{\kappa}B/NF-{\kappa}B$ pathway and $I{\kappa}B$ kinase(IKK) activity was also investigated. Methods : BEAS-2B and A549 cells, pulmonary alveolar macrophages, peripheral blood monocytes and lymphocytes were used. The cells were pre-treated with CsA, or FK506, for various time periods, followed by stimulation with TNF-${\alpha}$, LPS or IL-$1{\beta}$. The $I{\kappa}B{\alpha}$ expressions were assayed by Western blot analyses. The IKK activity was evaluated by an in vitro immune complex kinase assay, using GST-$I{\kappa}B{\alpha}$ as the substrate. Results : Neither CsA nor FK506 affected the level of $I{\kappa}B{\alpha}$ expression in any of the cell types used in this study. CsA pre-treatment inhibited the TNF ${\alpha}$-induced $I{\kappa}B{\alpha}$ degradation in bronchial epithelial cells. In contrast, the TNF ${\alpha}$-induced $I{\kappa}B{\alpha}$ degradation was not affected by FK506 pre-treatment. However, FK506 suppressed the cytokine-induced $I{\kappa}B{\alpha}$ degradation in the pulmonary alveolar macrophages, peripheral blood monocytes and lymphocytes. The inhibitory effect of CsA, or FK506, on $I{\kappa}B{\alpha}$ degradation was not related to IKK. Conclusions : CsA and FK506 suppressed the $I{\kappa}B{\alpha}$ degradation in bronchial epithelial cells, monocytes, lymphocytes and alveolar macrophages, so this may not be mediated through IKK.

Economic Sanction and DPRK Trade - Estimating the Impact of Japan's Sanction in the 2000s - (대북 경제제재와 북한무역 - 2000년대 일본 대북제재의 영향력 추정 -)

  • Lee, Suk
    • KDI Journal of Economic Policy
    • /
    • v.32 no.2
    • /
    • pp.93-143
    • /
    • 2010
  • This paper estimates the impact of Japan's economic sanction on DPRK trade in the 2000s. It conceptualizes the effects of sanction on DPRK trade, econometrically tests whether such effects exist in case of Japan's sanction using currently available DPRK trade statistics, and measures the size of the effects by correcting and reconfiguring the deficiencies of the currently available DPRK trade statistics. The main findings of the paper are as follows. First, Japan's sanction can have two different effects on DPRK trade: 'Sanction Country Effect' and "Third Country Effect.' The former means that the sanction diminishes DPRK trade with Japan while the latter refers to the effects on DPRK trade with other countries as well. The third country effect can arise not simply because the DPRK changes its trade routes to circumvent the sanction, but because the sanction forces the DPRK to readjust its major trade items and patterns. Second, currently no official DPRK trade statistics are available. Thus, the so-called mirror data referring to DPRK trading partners' statistics should be employed for the analysis of the sanction effects. However, all currently available mirror data suffer from three fundamental problems: 1) they may omit the real trade partners of the DPRK; 2) they may confuse ROK trade with DPRK trade; 3) they cannot distinguish non-commercial trade from commercial trade, whereas only the latter concerns Japan's sanction. Considering those problems, we have to adopt the following method in order to reach a reasonable conclusion about the sanction effect. That is, we should repeat the same analysis using all different mirror data currently available, which include KOTRA, IMF and UN Commodity Trade Statistics, and then discuss only the common results from them. Third, currently available mirror data make the following points. 1) DPRK trade is well explained by the gravity model. 2) Japan's sanction has not only the sanction country effect but also the third country effect on DPRK trade. 3) The third country effect occurs differently on DPRK export and import. In case of export, the mirror statistics reveal positive (+) third country effects on all of the major trade partners of the DPRK, including South Korea, China and Thailand. However, on DPRK import, such third country effects are not statistically significant even for South Korea and China. 4) This suggests that Japan's sanction has greater effects on DPRK import rather than its export. Fourth, as far as DPRK export is concerned, it is possible to resolve the abovementioned fundamental problems of mirror data and thus reconstruct more accurate statistics on DPRK trade. Those reconstructed statistics lead us to following conclusions. 1) Japan's economic sanction diminished DPRK's export to Japan from 2004 to 2006 by 103 million dollars on annual average (Sanction Country Effect). It comprises around 60 percent of DPRK's export to Japan in 2003. 2) However, for the same period, the DPRK diverted its exports to other countries to cope up with Japan's sanction, and as a result its export to other countries increased by 85 million dollars on annual average (Third Country Effect). 3) This means that more than 80 per cent of the sanction country effect was made up for by the third country effect. And the actual size of impact that Japan's sanction made on DPRK export in total was merely 30 million dollars on annual average. 4) The third country effect occurred mostly in inter-Korean trade. In fact, Japan's sanction increased DPRK export to the ROK by 72 million dollars on annual average. In contrast, there was no statistically significant increase in DPRK export to China caused by Japan's sanction. 5) It means that the DPRK confronted Japan's sanction and mitigated its impact primarily by using inter-Korean trade and thus the ROK. Fifth, two things should be noted concerning the fourth results above. 1) The results capture the third country effect caused only by trade transfer. Facing Japan's sanction, the DPRK could transfer its existing trade with Japan to other countries. Also it could change its main export items and increase the export of those new items to other countries as mentioned in the first result. However, the fourth results above reflect only the former, not the latter. 2) Although Japan's sanction did not make a huge impact on DPRK export, it might not be necessarily true for DPRK import. Indeed the currently available mirror statistics suggest that Japan's sanction has greater effects on DPRK import. Hence it would not be wise to argue that Japan's sanction did not have much impact on DPRK trade in general, simply using the fourth result above.

  • PDF

Corporate Governance and Managerial Performance in Public Enterprises: Focusing on CEOs and Internal Auditors (공기업의 지배구조와 경영성과: CEO와 내부감사인을 중심으로)

  • Yu, Seung-Won
    • KDI Journal of Economic Policy
    • /
    • v.31 no.1
    • /
    • pp.71-103
    • /
    • 2009
  • Considering the expenditure size of public institutions centering on public enterprises, about 28% of Korea's GDP in 2007, public institutions have significant influence on the Korean economy. However, still in the new government, there are voices of criticism about the need of constant reform on public enterprises due to their irresponsible management impeding national competitiveness. Especially, political controversy over appointment of executives such as CEOs of public enterprises has caused the distrust of the people. As one of various reform measures for public enterprises, this study analyzes the effect of internal governance structure of public enterprises on their managerial performance, since, regardless of privatization of public enterprises, improving the governance structure of public enterprises is a matter of great importance. There are only a few prior researches focusing on the governance structure and managerial performance of public enterprises compared to those of private enterprises. Most of prior researches studied the relationship between parachuting employment of CEO and managerial performance, and concluded that parachuting produces negative effect on managerial performance. However, different from the results of such researches, recent studies suggest that there is no relationship between employment type of CEOs and managerial performance in public enterprises. This study is distinguished from prior researches in view of following. First, prior researches focused on the relationship between employment type of public enterprises' CEOs and managerial performance. However, in addition to this, this study analyzes the relationship of internal auditors and managerial performance. Second, unlike prior researches studying the relationship between employment type of public corporations' CEOs and managerial performance with an emphasis on parachuting employment, this study researches impact of employment type as well as expertise of CEOs and internal auditors on managerial performance. Third, prior researchers mainly used non-financial indicators from various samples. However, this study eliminated subjectivity of researchers by analyzing public enterprises designated by the government and their financial statements, which were externally audited and inspected. In this study, regression analysis is applied in analyzing the relationship of independence and expertise of public enterprises' CEOs and internal auditors and managerial performance in the same year. Financial information from 2003 to 2007 of 24 public enterprises, which are designated by the government, and their personnel information from the board of directors are used as samples. Independence of CEOs is identified by dividing CEOs into persons from the same public enterprise and persons from other organization, and independence of internal auditors is determined by classifying them into two groups, people from academic field, economic world, and civic groups, and people from political community, government ministries, and military. Also, expertise of CEOs and internal auditors is divided into business expertise and financial expertise. As control variables, this study applied foundation year, asset size, government subsidies as a proportion to corporate earnings, and dummy variables by year. Analysis showed that there is significantly positive relationship between independence and financial expertise of internal auditors and managerial performance. In addition, although business expertise and financial expertise of CEOs were not statistically significant, they have positive relationship with managerial performance. However, unlike a general idea, independence of CEOs is not statistically significant, but it is negatively related to managerial performance. Contrary to general concerns, it seems that the impact of independence of public enterprises' CEOs on managerial performance has slightly decreased. Instead, it explains that expertise of public enterprises' CEOs and internal auditors plays more important role in managerial performance rather than their independence. Meanwhile, there are limitations in this study as follows. First, in contrast to private enterprises, public enterprises simultaneously pursue publicness and entrepreneurship. However, this study focuses on entrepreneurship, excluding considerations on publicness of public enterprises. Second, public enterprises in this study are limited to those in the central government. Accordingly, it should be carefully considered when the result of this study is applied to public enterprises in local governments. Finally, this study excludes factors related to transparency and democracy issues which are raised in appointment process of executives of public enterprises, as it may cause the issue of subjectivity of researchers.

  • PDF

Analysis of Dietary Habits by MDA(Mini Dietary Assessment) Scores and Physical Development and Blood Parameters in Female College Students in Seoul Area (서울 지역 여대생의 식생활 평가에 따른 식습관, 신체 발달 및 혈액 인자 비교 연구)

  • Choi, Kyung-Soon;Shin, Kyung-Ok;Huh, Seon-Min;Chung, Keun-Hee
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.19 no.6
    • /
    • pp.856-868
    • /
    • 2009
  • This study was conducted to investigate causes for health problems among college women by analyzing factors related to their dietary habits, physical development, health habits, and blood parameters. The subjects were ages 20 to 24 years, lived in the Seoul area and were randomly selected during March, 2008 to August, 2009. The average height and weight of the overall subjects were $162.02{\pm}4.89\;cm$ and $53.96{\pm}7.00\;kg$, respectively. According to a 3-point assessment scale for the subjects' dietary habits, the average point value was 21.2. The percentage of subjects that ate breakfast daily was only 30.5%, and they omitted regular meals at least once a week. Approximately 83.5% of the subjects reported eating out often or frequently, and preferred Korean foods when they ate out. The subjects had interim meals (snacks) one or two times daily, and 40.4% of them preferred unbalanced meals. As their interim meals, among the 'good' group, ate breaded potatoes (39.3%), carbonated beverages, and ice cream (36.8%), whereas the 'poor' group, drank milk and ate dairy products (38.0%) as well as fast food and fried food (22.8%). Intakes of energy, fat, vitamins $B_2$ and $B_6$, niacin, folic acid, calcium, iron, zinc, and phosphorus were higher in the 'poor' group. The average hemoglobin level ($13.77{\pm}1.00\;g/dL$) among the subjects was within normal range; while 2.7% of subjects had hemoglobin levels under 11.1 g/dL (standard value) and were examined as anemic. The degree of interest in health was 24.5% higher among the subjects who had poor dietary habits. In contrast, among those who had good dietary habits, 49.6% reported they had no interest in regular exercise. The subjects reported that regular meals, nutrient intake, sufficient rest, and sleep as necessary to maintain health. The average amount of sleep obtained by the subjects was 6~8 hours. Among the 'poor' group, 36.2% reported that they exercised regularly, whereas 18.5% of the subjects in the 'good' group reported regular exercise (p<0.05). In conclusion, it appears necessary to provide nutrition education through teaching and to promote nutrition and health to college women so they can control their individual health status and create practicable dietary plans.

  • PDF

The Results of Curative Radiotherapy for the Uterine Cervical Cancer (자궁경부암의 근치적 방사선치료 성적)

  • Kim, Hyoung-Jin;Kim, Jung-Soo;Kwon, Hyoung-Cheol;Kim, Jin-Kee;Oh, Byung-Chan
    • Radiation Oncology Journal
    • /
    • v.14 no.3
    • /
    • pp.191-199
    • /
    • 1996
  • Purpose : To evaluate 5-year survival rate, patterns of failure and complications of cervical cancer treatment, fifty nine patients treated by curative radiotherapy for the uterine cervical cancer were analyzed retrospectively. Materials and Methods : From March 1986 to May 1990, fifty nine patients with histologically proven uterine cervical cancer were analyzed. According to FIGO stage, there were 2 patients ($3.4\%$) in stage Ib, 2 patients ($3.4\%$) in stage IIa, 31 patients ($52.5\%$) in stage IIb, 15 patients ($25.4\%$) in stage IIIb, 9 patients ($15.3\%$) in stage IV. External RT was per formed by 6 MVLINAC with daily 1.8 Gy, 5 times per week and followed by ICR. A point dose of ICR was calculated to 30-43.66 Gy (median: 34.6 Gy). These techniques delivered total A Point dose of 80.4 to 109.8 Gy (median: 85 Gy). Patients had been followed up from 2 to 110 months (median: 61 months) Results : The overall 5-year survival rate & disease free survival rate were $55.9\%$ and $55.0\%$ respectively. According to FIGO stage, the 5-year survival rate for less than IIa, IIb, IIIb, IV were $75.0\%$, $74.8\%$, $26.7\%$, $33.3\%$, respectively. In univariate analysis, the 5-year survival rate for stage IIb and below versus stage IIIa and above revealed $74.8\%$, $29.2\%$ respectively (P<0.005). According to the hemoglobin level during RT, the 5-rear survival rate of was $73.3\%$ for patients with Hg 10 gm/dL or higher, in contrast to $0\%$ for those with lower than 10 gm/dL (p<0.005). In 18 patients with nonbulky tumor (<5cm), the 5-year survival rates were $71.8\%$. The 5-rear survival rates for 18 patients with 5 cm or greater in tumor diameter were $22.2\%$ (p<0.005). The 5-year survival rate for Patient age of above 50 years and below were $65.3\%$ $34.2\%$ respectively (p<0.05). ECOG performance status. pathologic finding, total dose, total treatment time were not statistically significant factors. The significant prognostic factors affecting overall 5-year survival rate by multivariate analysis showed the hemoglobin level during RT (P=0.0001), tumor size (p=0.0390), FIGO stage (p=0.0468). Total recurrence rate was $23.7\%$ local failure $15.2\%$ (9/59), distant metastasis $6.8\%$ (4/59), local and distant metastasis $1.7\%$ (1/59). According to the RTOG/EORTC Soma Scales, the late complication rate was $23.8\%$ (14/59) The late complication rate of colorectum and genitourinary tract were $15.3\%$ (9/59), $8.5\%$ (5/59), respectively: 10 patients ($17.0\%$) were grade 2, 3 Patients ($5.1\%$) were grade 3 and one patient ($1.7\%$) was grade 4. The late complications were radiation proctitis, rectal bleeding, radiation colitis, diarrhea and radiation cystitis in decreasing order. Conclusion : For improvement of therapeutic results, prospective randomized trials are recomended to discover new prognostic factors and more aggressive radiation therapeutic methods are needed for poor prognostic patients. The adjuvant chemotherapy or radiation-sensitizing agents must be considered to inhibit regional and distant metastasis.

  • PDF

Impacts of Climate Change on Rice Production and Adaptation Method in Korea as Evaluated by Simulation Study (생육모의 연구에 의한 한반도에서의 기후변화에 따른 벼 생산성 및 적응기술 평가)

  • Lee, Chung-Kuen;Kim, Junwhan;Shon, Jiyoung;Yang, Woon-Ho;Yoon, Young-Hwan;Choi, Kyung-Jin;Kim, Kwang-Soo
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.14 no.4
    • /
    • pp.207-221
    • /
    • 2012
  • Air temperature in Korea has increased by $1.5^{\circ}C$ over the last 100 years, which is nearly twice the global average rate during the same period. Moreover, it is projected that such change in temperature will continue in the 21st century. The objective of this study was to evaluate the potential impacts of future climate change on the rice production and adaptation methods in Korea. Climate data for the baseline (1971~2000) and the three future climate (2011~2040, 2041~2070, and 2071~2100) at fifty six sites in South Korea under IPCC SRES A1B scenario were used as the input to the rice crop model ORYZA2000. Six experimental schemes were carried out to evaluate the combined effects of climatic warming, $CO_2$ fertilization, and cropping season on rice production. We found that the average production in 2071~2100 would decrease by 23%, 27%, and 29% for early, middle, and middle-late rice maturing type, respectively, when cropping seasons were fixed. In contrast, predicted yield reduction was ~0%, 6%, and 7%, for early, middle, and middle-late rice maturing type, respectively, when cropping seasons were changed. Analysis of variation suggested that climatic warming, $CO_2$ fertilization, cropping season, and rice maturing type contributed 60, 10, 12, and 2% of rice yield, respectively. In addition, regression analysis suggested 14~46 and 53~86% of variations in rice yield were explained by grain number and filled grain ratio, respectively, when cropping season was fixed. On the other hand, 46~78 and 22~53% of variations were explained respectively with changing cropping season. It was projected that sterility caused by high temperature would have no effect on rice yield. As a result, rice yield reduction in the future climate in Korea would resulted from low filled grain ratio due to high growing temperature during grain-filling period because the $CO_2$ fertilization was insufficient to negate the negative effect of climatic warming. However, adjusting cropping seasons to future climate change may alleviate the rice production reduction by minimizing negative effect of climatic warming without altering positive effect of $CO_2$ fertilization, which improves weather condition during the grain-filling period.