• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.220-224
• /
• 2016

Chronic inflammation, which results from continuous exposure to antigens, is one of major reasons for tissue damage and diseases such as rheumatoid arthritis and type 2 diabetes. In this study, we investigated the anti-inflammatory effects of extracts (hexane, $CHCl_3$, MeOH, $MeOH/H_2O$, and $H_2O$) from GW10-45, which is our new cultivar of an edible mushroom Pleurotus ferulae (ASI 2803 and ASI 2778), in RAW264.7 murine macrophages. None of the extracts showed cytotoxicity in RAW264.7 cells and the hexane, CHCl and H extracts reduced nitric oxide (NO) production, an important inflammatory marker, in lipopolysaccharide (LPS)-stimulated RAW264.7 cells. Particularly, the extract (CG45) inhibited NO production more than the other extracts did. To elucidate the effects of CG45 on molecular targets involved in pro-inflammatory responses, we performed western blot analysis. Expression of inducible nitric oxide (iNOS) significantly decreased in LPS and CG45 co-incubated cells compared to that in LPS only-treated cells. Additionally, another protein thatplays a critical role in inflammation, was down-regulated in cells treated with both LPS and CG45. In the nuclear factor $(NF)-{\kappa}B$ pathway, phosphorylation of $I{\kappa}B{\alpha}$ decreased in RAW264.7 cells treated with both LPS and CG45. Furthermore, CG45 inhibited the phosphorylation of $NF-{\kappa}B$ in LPS-stimulated RAW264.7 cells. Conclusively, CG45 could suppress pro-inflammatory responses in LPS-stimulated RAW264.7 cells by down-regulating not only the phosphorylation of $NF-{\kappa}B$ and $I{\kappa}B{\alpha}$ but also the expression of iNOS and COX-2 without any cytotoxicity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.4
• /
• pp.267-273
• /
• 1977

Rainbow trout were reared in a small indoor aquarium which was equipped with a simple recirculating biofilter combined with a small amount of inflowing water for 199 days from April 25 to November 10, 1977 in Busan where very hot summer air temperature is encountered, and results obtained were promissing as following; 1. The aquarium has dimensions of $1m\;\times\;1m\;\times\;67cm(depth)$, and a bottom center sedimentation chamber of conical type through which out-flowing water is pushing fecal matter and other detritus outward. The conical sedimentation chamber measures 20 cm depth and 20 cm diameter at its upper mouth and tapers to the bottom end which is connected to 4 cm diameter draining pipe. The draining pipe goes through under the tank and then is elevated on the side. The water depth was maintained at about 40 cm depth by adjusting the heigh of draining pipe. The filter bed contained 16 l of $3\~5\;mm$ zeolite gravels, and water circulation rate was about 1030 l/hr. 2. Continuous inflowing water resulted in a good elimination of waste materials through its outflowing water thus reducing waste loading in the filter. 3. Mean temperature of water in the rearing aquarium containing about 400 l water volume was maintained at around 20 to $22^{\circ}C$ by 0.59 l/min of the inflowing well water which usually maintained the temperature of $17^{\circ}C$ during the hot summer season from the first of July to the first of October when the 10-days-mean air temperature ranged from $20^{\circ}\;to\;27.3^{\circ}C$ $(total\;mean\;24.6^{\circ}C) $ and under this condition the fish continued normal growth. 4. The production per 1 l/min of inflowing water with this simple biofilteration reached 30 hg. 5. The total cost including all feed and power during this experimental rearing period fell well within the economic establishment and if the feed and filteration system are improved the benefit-cost ratio will be much increased.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.23-32
• /
• 2010

The capacity of natural purification was limited by the interruption of natural flow and the problems such as eutrophication were occurred by nutritive salts accumulation in stagnant stream. Moreover, the inflow of non-point sources causes non-degradable materials to increase in stagnant stream. In this study, an upflow biological activated carbon (BAC) biofilm process comprised of anoxic, aerobic 1, and aerobic 2 reactors were introduced for treatment of stagnant stream and SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN, and TP were monitored in the upflow BAC biofilm reactors with continuous cycling. In order to simulate stagnant stream, the lake water of amusement park and golf course were stored as influent in a tank of $2m^3$ and hydraulic retention time (HRT) was changed into 6, 4, and 2 hours. At HRT 4hr and the lake water of amusement park as influent, the removal efficiencies of SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN, and TP showed the best water quality improvement and were 69.8, 83.0, 91.3, 74.1, 74.7, and 88.9%, respectively. At HRT 4hr and the lake water of golf course as influent, the removal efficiencies of SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN and TP were 78.5, 78.0, 80.2, 74.9, 55.6 and 97.5%, respectively. As the results of polymerase chain reaction - denaturing gel gradient electrophoresis (PCR-DGGE), microbial community was different depending on influent type. Fluorescence in situ hybridization (FISH) showed that nitrifying bacteria was dominant at HRT 4 hr. The biomass amount and microbial activities by INT-DHA test were not decrease even at lower HRT condition. In this study, the upflow BAC biofilm process would be considered to the water quality improvement of stagnant stream.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.155-160
• /
• 2005

Purpose : Many authors have been introduced field in field technique and 3-D conformal radiotherapy that increased the tumor dose as well as decreased the dose of abutting critical organ. These technique have multiple beam direction and small beam segments even below 10 MU(monitor unit)for each field. we have confirmed the influence of low MU on dose output and beam stability. Materials and Methods : To study the dose output, the dose for each field was always 90MU, but it divided into different segment size: 1, 2, 3, 5, 10, 15 segments, 90, 45, 30, 18, 9, 6 MU the measurements were carried out for X-ray energy 4 MV, 6 MV, 10 MV of three LINAC(Varian 600C, 2100C, 2100C, 2100C/D), in addition each measurement was randomly repeated three times for each energy. To study the field symmetry and flatness, X-omat V films were irradiated. After being developed, films were scanned and analyzed using densitometer. Results : Influence of low MU on dose is slightly more increase output about $1.2{\sim}2.9%$ in cGy/mu than 90MU, but may not changed beam quality(flatness or symmetry), Output stability depends on dose rate(PRF)rather than beam energy, field size. Conclusion : Presented result are under the limits(out put<3%, flatness<${\pm}3%$, symmetry<2%). The 3 accelerators are safe to use and to perform conformal radiotherapy treatments in small segments, small MU around 10MU. but Even if the result presented here under the limits, continuous adjustments and periodic QA should be done for use of small MU

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.249-259
• /
• 2018

This research had intended to find out regarding the present influences of the Smart Work on the intention to use continuously with the staff members working in the small- and medium-sized enterprises as the subject. And, finally, it had intended to find out about the Smart Work environments of the IT corporations and the non-IT corporations. For this research, the questionnaire survey data were collected from the staff members working at the small- and medium-sized enterprises. Through the questionnaire survey data that were collected, an empirical analysis was carried out. And, through the reliability analysis, the feasibility analysis, the discriminatory feasibility analysis, and the inspection of the degree of suitableness of the structural equation model, finally, the research model was verified and, finally, a difference analysis of the IT corporations and the non-IT corporations was carried out. Regarding the results of the analysis of the research, it appeared that the factors of the job efficiency and the job autonomy of the special characteristics of the job had the positive influences on the usefulness and the job satisfaction, which were the parameters and which were perceived. And it appeared that the time flexibility of the job form could not have any influences on the usefulness and the job satisfaction, which were the parameters and which were perceived. And it appeared that the spatial flexibility had the influences on the job satisfaction only. The perceived usefulness, which was a parameter, had the positive influences on the job satisfaction and the intention to use continuously. And, finally, the job satisfaction had the positive influences on the intention to use continuously. And it appeared that there were the differences, too, between the IT corporations and the non-IT corporations. It is thought that, through the results of this research and through the Smart Work environment, the positive influences on the workers and the organizations could be induced and that a better working environment than previously can be provided to the workers to fit the special characteristics of the corporations.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.419-425
• /
• 2017

In this study, the performance characteristics of the K-based sorbents (KEP-CO2P2, KEPCO RI, Korea) has been studied in relation with the heat exchanger structure and shape in a mixing zone of the carbonator in the bench-scale dry $CO_2$ capture process. Two types of heat exchangers (different structure and shape) were used in the carbonator as CASE 1 and CASE 2, in which the experiment has been continuously performed under the same operating conditions. During the continuous operation, working temperature of carbonator was 75 to $80^{\circ}C$, that of regenerator was 190 to $200^{\circ}C$, and $CO_2$ inlet concentration of the feed gas was 12 to 14 vol%. Especially, to compare the dynamic sorption capacity of sorbents, the differential pressure of the mixing zone in the carbonator was maintained around 400 to 500 mm $H_2O$. Also, solid samples from the carbonator and the regenerator were collected and weight variation of those samples was evaluated by TGA. The $CO_2$ removal efficiency and the dynamic sorption capacity were 64.3% and 2.40 wt%, respectively for CASE 1 while they were 81.0% and 4.66 wt%, respectively for CASE 2. Also, the dynamic sorption capacity of the sorbent in CASE 1 and CASE 2 was 2.51 wt% and 4.89 wt%, respectively, based on the weight loss of the TGA measurement results. Therefore, It was concluded that there could be a difference in the performance characteristics of the same sorbents according to the structure and type of heat exchanger inserted in the carbonator under the same operating conditions.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.78-90
• /
• 2013

Recently, the interest on exposure to radiation is rising. The radiation exposure of mammography is higher in absorbed dose than of X-ray, therefore unnecessary exposure needs to be reduced, and higher image quality is needed. Generally, ray quality of the radiation imaging is an important factor that determines image quality and the amount of ray exposure, and they are affected by tube voltage and added filter. The X-ray energy that is exposed from mammography device is generally a continuous spectrum, which includes low energy that has minute influence on the image quality, and high energy that hinders contrast on image. Currently, molybdenum (Mo) and rhodium (Rh) are the most used added filters for mammography device, and they are used differently according to the energy region of X-ray. This study aims to find out the degree of reduction in exposure dose according to the thickness of aluminum (Al), and to study the changes in image quality and dose when the added filter plates that are made with niobium (Nb) or zirconium (Zr) are used, other than molybdenum (Mo) and rhodium (Rh), the two most used added filters that have similar atomic number and K-absorption regions as Nb and Zr. In this study, single-added filters of molybdenum (Mo), niobium (Nb), and zirconium (Zr) are used, and in some cases, Aluminum (Al) is combined with the single filters. In this case, image quality is considered to be improved depending on the type of added filters, and by using Aluminum (Al) filter together with the others, unnecessary X-ray of low energy would be absorbed, therefore the dose is expected to decrease without any influence when the concentration level becomes identical.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.2
• /
• pp.131-141
• /
• 2008

Purpose : To investigate the feasibility and accuracy of Proton Resonance Frequency (PRF) shift based magnetic resonance (MR) temperature mapping utilizing the self-developed center array-sequencing phase unwrapping (PU) method for non-invasive temperature monitoring. Materials and Methods : The computer simulation was done on the PU algorithm for performance evaluation before further application to MR thermometry. The MR experiments were conducted in two approaches namely PU experiment, and temperature mapping experiment based on the PU technique with all the image postprocessing implemented in MATLAB. A 1.5T MR scanner employing a knee coil with $T2^*$ GRE (Gradient Recalled Echo) pulse sequence were used throughout the experiments. Various subjects such as water phantom, orange, and agarose gel phantom were used for the assessment of the self-developed PU algorithm. The MR temperature mapping experiment was initially attempted on the agarose gel phantom only with the application of a custom-made thermoregulating water pump as the heating source. Heat was generated to the phantom via hot water circulation whilst temperature variation was observed with T-type thermocouple. The PU program was implemented on the reconstructed wrapped phase images prior to map the temperature distribution of subjects. As the temperature change is directly proportional to the phase difference map, the absolute temperature could be estimated from the summation of the computed temperature difference with the measured ambient temperature of subjects. Results : The PU technique successfully recovered and removed the phase wrapping artifacts on MR phase images with various subjects by producing a smooth and continuous phase map thus producing a more reliable temperature map. Conclusion : This work presented a rapid, and robust self-developed center array-sequencing PU algorithm feasible for the application of MR temperature mapping according to the PRF phase shift property.

• Korea journal of population studies
• /
• v.25 no.2
• /
• pp.5-40
• /
• 2002

Using detailed data of women's work history, this study analyses the transition process between employment and non-employment over the life history in order to identity individual and structural determinants in the processes. Korean women comprise very heterogeneous groups in terms of work continuity: one group having a continuous work history and another having an interrupted work experience. While 4.0% of total women have stayed in the labor market since leaving school, 17.3% have not worked outside at all and remaining 87.9% have experienced into and out of the labor market at least once. On the average, the cumulated time of employment per woman is 8.2 years and the cumulated time of unemployment is 13.1 years. Thus Korean women work a total of only 38.5% of their whole lifetime after leaving school. We can conclude that the increase of the employment rate of married women in Korea since the 1970s has been due to the increase of the new entrants with short or little working careers into the labor market, not to the increase of women's work continuity on the whole. A women's educational achievement does not seem to be positively related to employment duration, contrary to the suggestion of the human capital theory, Rather, family variables, especially the existence of the child under 6 yens old, is a more significant determining factor for an individual's exit from employment. And there is little difference among different age cohorts which implies little improvement in the employment continuity of younger women. This study also documents the importance of structural variables, such as the type of occupation, as significant determining factors for the hazard rate. Specially women with professional jobs tend to stay longer in the labor market. Therefore, women's entry into more professional occupations is expected to contribute to the continuity of employment. Our results also show that duration-dependence is not spurious. When unobserved heterogeneity is controlled, the negative relation between the rate from employment and the duration of employment does not disappear.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.113-130
• /
• 2002

In this paper, we developed DNL(Dynamic Network Loading) model based on Moving cell theory to analyze the dynamic characteristics of traffic flow in congested network. In this paper vehicles entered into link at same interval would construct one cell, and the cells moved according to Cell following rule. In the past researches relating to DNL model a continuous single link is separated into two sections such as running section and queuing section to describe physical queue so that various dynamic states generated in real link are only simplified by running and queuing state. However, the approach has some difficulties in simulating various dynamic flow characteristics. To overcome these problems, we present Moving cell theory which is developed by combining Car following theory and Lagrangian method mainly using for the analysis of air pollutants dispersion. In Moving cell theory platoons are represented by cells and each cell is processed by Cell following theory. This type of simulation model is firstly presented by Cremer et al(1999). However they did not develop merging and diverging model because their model was applied to basic freeway section. Moreover they set the number of vehicles which can be included in one cell in one interval so this formulation cant apply to signalized intersection in urban network. To solve these difficulties we develop new approach using Moving cell theory and simulate traffic flow dynamics continuously by movement and state transition of the cells. The developed model are played on simple network including merging and diverging section and it shows improved abilities to describe flow dynamics comparing past DNL models.