• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.129-134
• /
• 2021

Recently, the demand for electricity is gradually increasing due to the rapid industrial development and the improvement of living standards. In the case of Korea, which is highly dependent on fossil fuels due to such a surge in electricity demand, reduction and freezing of greenhouse gas emissions due to international environmental regulations will immediately lead to a contraction in industrial activities. Accordingly, there are many difficulties in competition with advanced countries that want to link the environment with the country's industrial production activities, and the development of alternative energy as a countermeasure is of great interest around the world. Among these new power generation methods, small-scale power generation facilities with relatively small capacity include photovoltaic generation, wind power generation, and fuel cell generation. Among them, the fuel cell attracts the most attention in consideration of continuous operation, high power generation efficiency, and long-term durability, which are important factors for practical use. Therefore, in this paper, the fuel cell power generation system was researched and constructed by designing the power conversion circuit necessary to finally obtain the AC power used in our daily life by using the DC power generated from the fuel cell as an input.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.269-274
• /
• 2009

The main objective of this study was to establish optimum condition of wet grinding process for manufacturing microparticulated seaweed calcium. Process parameters such as concentration of forming agent, rotor speed, bead size, feed rate, and grinding time were adapted during wet-grinding of seaweed calcium. The particle size range of the raw seaweed calcium was 10-20 $\mu$m. The calcium particles were reduced to under 1 $\mu$m as nano scale after grinding. Gum arabic was suitable for forming agent and 5%(w/v) concentration was the most effective in grinding efficiency. A wet-grinding process operated at 4,000 rpm rotor speed, 0,4 mm bead size, and 0.4 L/hr feeding rate, respectively, produced less than 600 mm(>>90%)-sized particles. In batch systems, 8 cycles of grinding showed higher efficiency, but 20 min of grinding time in continuous processing was more efficient to reduce particle size than the batch processing. Based on the result, the optimum conditions of the wet grinding process were established: operation time of 20 minutes, rotor speed of 4,000 rpm, bead size of 0.4 mm, feed rate of 40 mL/min and 30% mixing ration with water. The size of the resulting ultra fine calcium particles ranged between 40 and 660 mm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.299-305
• /
• 2019

This study was initiated to solve the difficulties of aged and female workers in agriculture society due to aging and demise of young people. In the case of the conventional elevated lift, the risk of exposure to uneven road or work environment, not the difficulty of professional qualification and operation, and the risk of exposure to the uneven road or working environment, were also studied based on previous researches so that women could easily and efficiently perform productive agriculture. First, the simulation was carried out through the prediction model of traction performance using the object of agricultural forklift, and the soil of the Kimhae city in Gyeongnam (34.125kPa, internal friction angle 35.294deg, external friction angle 13.620deg, Adhesion force 5.750 kPa, average cone index 0-15 cm cl, 1001.8 kPa). In the case of the forklift for simulation, the driving force and the kinetic resistance prediction modeling of the agricultural electric forklift are modeled. Based on this model, the motor control drive adopts the 1232E model, which is a drive dedicated to AC motor, and divides the two drivers into master and slave And the model for the simulation was designed to control motor drive, hydraulic drive, and various outputs on the main PCB. The simulation model is undergoing continuous simulation, modification and supplementation. Based on this research, we will continue research for development of safer and more efficient agricultural electric forklift.

• Clean Technology
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2019

Effects of the Cu and K addition and the reduction condition of Fe-based catalysts for Fischer-Tropsch reaction are studied in a continuous flow reactor in this research. The catalysts for the reaction were prepared by homogeneous precipitation followed by incipient wetness impregnation. Physicochemical properties of the $Al_2O_3$ supported Fe-based catalysts are characterized by various methods including X-ray diffraction (XRD), temperature programmed reduction (TPR), and scanning electron microscopy (SEM). Catalytic activities and stabilities of the Fe/Cu/K catalyst are investigated in time-on-stream for an extended reaction time over 216 h. It is found that a reduction of the catalysts using a mixture of CO and $H_2$ can promote their catalytic activities, attributed to the iron carbides formed on the catalysts surface by X-ray diffraction analysis. The addition of Cu induces a fast stabilization of the reaction reducing the time to reach at the steady state by enhancement of catalytic reduction. The addition of K to the catalysts increases the CO conversion, while the physical stability of catalyst decreases with potassium loading up to 5%. The Fe/Cu (5%)/K (1%) catalyst shows an enhanced long term stability for the Fischer-Tropsch reaction under the practical reaction condition, displaying about 15% decrease in the CO conversion after 120 h of the operation.

• Journal of Industrial Convergence
• /
• v.17 no.2
• /
• pp.29-34
• /
• 2019

The purpose of this study is to analyze the achievements of employment support by the government support specialization project. The data used in this study are based on the comparison of 5 - year employment support field and the operation results of the program until 2014-2018. The results of the study are as follows. First, the overall employment rate of the university has been continuously increased. Especially, the employment rate of the specialization department has been higher than the employment rate of the non - specialization department. Second, as a result of the analysis of the employment capacity strengthening index and the learning capacity strengthening index, it showed a steady increase in each year and contributed to the cultivation of customized talents required by the local society and the national industry. Third, as a result of analyzing the satisfaction of students who are business users, it was confirmed that the business reflecting the demands of the consumers was realized. Fourth, the continuous improvement of the business and the reflux have made the infrastructure of the employment support project more advanced and the system of supporting employment of the university systematically established. In conclusion, the result of the employment support project according to the specialization program showed excellent results and it is necessary to complement theses results when establishing related business plan in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.542-549
• /
• 2019

Maritime accidents, such as the collision of a fishing boat in Incheon's Yeongheung Island, result in several casualties and property damage, even if they occur just once. To prevent such accidents, the Incheon Metropolitan Government is implementing safety management policies; further, they will provide ship collision warning services to prevent collisions on WAVE (Wireless Access in Vehicular Environment) communication-based ship safety operation pilot projects. However, to realize these objectives, a service standardization method is required that defines specific service types, configurations, and systems, which should be prepared based on user requirement analyses. In this study, a standardization method of WAVE communication-based collision warning service was developed by analyzing the requirements of the vessel operators subject to the services and related authorities. This will help improve the quality of service, ensuring professionalism and reliability through continuous improvement and efforts for standardization, as well as data derived from demonstration projects. Therefore, it is expected to help prevent maritime accidents to a considerable extent.

• The Korean Journal of Archival Studies
• /
• no.33
• /
• pp.39-84
• /
• 2012

Maul is a rural community with common culture and self-government system and generally consists of tens of houses living together in Korea. Maul is different from a village in the West. Maul archive is a community archive of a maul. It is not only the space to record the life of residents, history and culture of a maul but also the space to realize democracy by the participation of maul residents and to satisfy the cultural life of current residents. Nowadays, it is very important to establish maul archives to connect mauls and to communicate with the outside world, to reinforce the orignal form in maul culture and revive the alienated maul culture. To establish the maul archives, it is necessary to draw the recognition and continuous interest of the central and local government and scientifical study of scholars. The first step to found maul archives is to organize a committee. Then the committee will benchmark the preceding practices, collect, record and manage the maul archives. The maul archives is recommended to be housed in an existent traditional house with some remodeling for spaces of display and education, preservation and management. I believe that the maul archive is culturally meaningful for the resident. They will enjoy and develop their lives better, connected to outside world. The co-operation of the scholar, the resident, and the government will foster the maul archive to a success.

• Membrane Journal
• /
• v.31 no.5
• /
• pp.343-350
• /
• 2021

In this study the suction pressure was measured with respect to operational time by submersing the multi-bore capillary membrane module in membrane bioreactor(MBR). The hexagonal shape capillary module which has the nominal pore size of 0.2 ㎛, outer diameter of 6.4 or 4.2 mm was immersed in MLSS 8,000 mg/L active sludge aqueous solution, and confirmed changes with respect to permeation flux and air flow rate. It was operated by the filtration/relaxation(FR), FR with backwashing(FR/BW), and sinusoidal flux continuous operation(SFCO) modes. The suction pressure for the SFCO and FR modes was lower at 30 and 50 L/m²·hr, respectively. In addition, the suction pressure of the module with a small outer diameter was relatively low. The suction pressure of a large outer diameter was greatly increased, but it could be reduced by more than 40% by backwashing.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.177-189
• /
• 2021

Defense R&D is a key process for securing weapons systems determined by mid- and long-term needs to cope with changing future battlefield environments. In particular, the test and evaluation provides information necessary to determine whether or not to switch to mass production as the last gateway to research and development of weapons systems and plays an important role in ensuring performance linked to the life cycle of weapons systems. Meanwhile, if you look at the recent changes in the operational environment of the Korean Peninsula and the defense acquisition environment, you can see three main characteristics. First of all, continuous safety accidents occurred during the operation of the weapon system, which increased social interest in the safety of combatants, and the efficient execution of the limited defense budget is required as acquisition costs increase. In addition, strategic approaches are needed to respond to future battlefield environments such as robots, autonomous weapons systems (RAS), and cyber security test and evaluation. Therefore, in this study, we would like to present strategies for improving the testing and evaluation of weapons systems by considering the characteristics of the security environment that has changed recently. To this end, the improvement strategy was derived by analyzing the complementary elements of the current weapon system operational test and evaluation system in a multi-dimensional model and prioritized through the hierarchical analysis method (AHP).

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.207-224
• /
• 2020

With the gradual improvement of China's residents' economic level, the continuous improvement of the holiday system, and the main purpose of relaxing mood and experiencing life, rural tourism has developed rapidly. In order to further achieve the goals of farmers' entrepreneurship, agricultural income increase, rural prosperity, and tourism management departments and tourism enterprises' management and operation objectives, this paper puts forward research hypotheses on the basis of relevant literature review and references. Based on the previous research results, this paper designs a questionnaire on Residents' rural tourism behavior intention, and uses SPSS23.0 to conduct correlation analysis and hypothesis test on the sample data, and draws the following conclusions: (1) rural tourism attitude, subjective norms, and perceived behavior control have a significant positive impact on rural tourism behavior intention; (2) policy system and resource conditions have a significant positive impact on rural tourism behavior intention; (3) policy system has a significant positive impact on subjective norms and perceived behavior control, and resource conditions have a significant positive impact on rural tourism attitude, subjective norms, and perceived behavior control.