• 대한물리의학회지
• /
• 제14권4호
• /
• pp.19-27
• /
• 2019

PURPOSE: This study examined which stretching exercise had the most positive effect on increasing the range of motion (ROM) of the knee joint in healthy people and whether there was a difference between continuous stretching and intermittent stretching. METHODS: This study included 30 healthy university students from OOO University. The subjects were asked to sit on a mat and perform hamstring-stretching exercise during which the ROM and muscle tone were measured with pre and post-tests. Each subject was assigned randomly to a continuous stretching group (stretching without relaxation time group, n=10, G1) or intermittent stretching group (stretching with 10s relaxing time group, n=10, G2; and stretching with 20s relaxing time group, n=10, G3). The participants conducted hamstring stretching exercises with a sit-and-reach box at three different rest times (0s, 10s, and 20s). Subsequently, they underwent passive knee extension (PKE) tests, in which the ROM of the knee joint was measured with a goniometer, and the muscle tone was evaluated using a MyotonPro. RESULTS: Significant differences in muscle tone, stiffness, and ROM were observed between pre-test and post-test in each groups (p<.05). Although the post hoc tests indicated no significant differences in muscle tone and ROM between the continuous stretching group and intermittent stretching group (p>.05), the rate of change of the ROM showed that the intermittent stretching group developed more effective maintenance of the hamstring flexibility. CONCLUSION: No significant differences in the muscle tone of the hamstring and ROM of the knee joint were observed according to the hamstring stretching exercises with three different rest times. On the other hand, the rate of change of the ROM showed that intermittent stretching maintained the hamstring flexibility more effectively.

• 대한족부족관절학회지
• /
• 제21권3호
• /
• pp.113-116
• /
• 2017

Synovial fistula of the ankle joint is an uncommon complication from an ankle sprain. This may likely result in an unhealed wound around the ankle joint due to continuous leakage of joint fluid. However, in the event of an open wound on the lower leg, and not on the joint, it may be difficult to consider synovial fistula as a cause of the open wound. We experienced an interesting case with an unhealed open wound on the lower leg due to a synovial fistula of the ankle joint following an ankle sprain. We obtained good results after a treatment using a self-produced suction drainage device on the unhealed open wound.

• Smart Structures and Systems
• /
• 제12권3_4호
• /
• pp.415-426
• /
• 2013

Condition assessment and monitoring of bridges is critical for safe passenger travel, public transportation, and efficient freight. In monitoring, displacement measurement capability is important to keep track of performance of bridge, in part or as whole. One of the most important parts of a bridge is the expansion joint, which accommodates continuous cyclic thermal expansion of the whole bridge. Though expansion joint is critical for bridge performance, its inspection and monitoring has not been considered significantly because the monitoring requires long-term data using cost intensive equipment. Recently, a wireless smart sensor network (WSSN) has drawn significant attention for transportation infrastructure monitoring because of its merits in low cost, easy installation, and versatile on-board computation capability. In this paper, a rapid wireless displacement monitoring system, wireless hybrid sensor (WHS), has been developed to monitor displacement of expansion joints of bridges. The WHS has been calibrated for both static and dynamic displacement measurement in laboratory environment, and deployed on an in-service highway bridge to demonstrate rapid expansion joint monitoring. The test-bed is a continuous steel girder bridge, the Founders Bridge, in East Hartford, Connecticut. Using the WHS system, the static and dynamic displacement of the expansion joint has been measured. The short-term displacement trend in terms of temperature is calculated. With the WHS system, approximately 6% of the time has been spent for installation, and 94% of time for the measurement showing strong potential of the developed system for rapid displacement monitoring.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.733-738
• /
• 2004

Recently continuous welded rail is generally used to ensure running performances and to overcome the problems such as structural vulnerability and fastener damage at the rail expansion joint. Though the use of continuous welded rail on bridge has the advantage of decreasing the vibration and damage of rail, it still the risk of buckling and breaking of rail due to change of temperature, starting and/or breaking force, axial stress concentration and so on. So, VIC code and many methods has been developed by researchers considering rail-bridge interaction. Although there are many research concerning stability of continuous welded rail about temperature change on bridge and starting and/or breaking force, the study of continuous welded mil for earthquake load is still unsufficient. In this study, the nonlinear seismic response analysis of continuous welded rail on bridge considering soil-structure interaction, geotechnical characteristic of foundation and earthquake isolation equipment has been performed to examine the stability of continuous welded rail.

• 대한치과의사협회지
• /
• 제50권5호
• /
• pp.256-261
• /
• 2012

Temporomandibular joint (TMJ) prosthesis have been hesitated to use because of bitter memories about Proplast-Teflon interpositional TMJ implants. Many clinicians, however, are trying to use total TMJ prosthesis with getting continuous long-term follow-up results. Alloplastic total TMJ replacement have been applied to much more patients who have failed previous TMJ prostheses or TMJ implants, fibrous/bony ankylosis, severe osteoarthritis, degenerative joint disease, idiopathic condylar resorption, condyle loss by trauma or tumor resection, and other bony destructive diseases. Nowadays three types of total TMJ prosthesis are widely used. In this article, indications, types of prosthesis, safety and stability would be demonstrated with a case report.

• Computers and Concrete
• /
• 제22권3호
• /
• pp.319-326
• /
• 2018

RC (Reinforced Concrete) members are always subjected to loading conditions and have construction joints when constructed on a big scale. Service life for RC structure exposed to chloride attack is usually estimated through chloride diffusion test in sound concrete, however the test is performed without consideration of effect of loading and joint. In the present work, chloride diffusion coefficient is measured in concrete cured for 1 year. In order to evaluate the effect of applied load, cold joint, and mineral admixtures, OPC (Ordinary Portland Cement) and 40%-replaced GGBFS (Ground Granulated Blast Furnace Slag) concrete are prepared. The diffusion test is performed under loading conditions for concrete containing cold joint. Investigating the previous test results for 91 days-cured condition and the present work, changing diffusion coefficients with applied stress are normalized considering material type and cold joint. For evaluation of service life in RC continuous beam with 2 spans, non-linear analytical model is adopted, and service life in each location is evaluated considering the effects of applied stress, cold joint, and GGBFS. From the work, varying service life is simulated under various loading conditions, and the reduced results due to cold joint and tensile zone are quantitatively evaluated. The effect of various conditions on diffusion can provide more quantitative evaluation of chloride behavior and the related service life.

• The Journal of Korean Physical Therapy
• /
• 제11권1호
• /
• pp.95-102
• /
• 1999

In hemiplegic gait, walking speed is an important factor to evaluate treatment effect. The purpose of this study was to describe and compare kinematic variables during differant speed hemiplegic gaits. Six hemiplegic patients(47-69 years old) after stroke and age - matched six volunteers in good health(51-61 years old) were studied. The patients were sorted into two groups, depending on their self - speed of walking : fast speed group(3 patients, $0.74\pm0.14m/s$) and slow speed group(3 patients, $0.29\pm0.09m/s)$. The results were following. 1. In the hip joint, the fast group had lower mean value than normal but had similar pattern to normal. The slow group had continuous flexed pattern. 2. In the knee joint, the fast group had similar mean value and pattern to normal. The slow group had continuous flexed pattern. 3. In the ankle joint, the two group had dorsiflexed pattern. The fast group had similar pattern to normal. Thus, the fast group was similar gait pattern to normal.

• 한국기계가공학회지
• /
• 제13권2호
• /
• pp.1-7
• /
• 2014

Recent experimental observations support the hypothesis that mechanical stimuli play a role in regulating the specialized molecular expression of articular cartilage in vitro and in vivo. Other studies have demonstrated that the continuous passive motion(CPM)bioreactor for whole joints can provide a platform for possible future in vitro studies and applications, including possible interactions of bio-mechanical and biochemical signals. In this study, we have developed acustom-made bioreactor capable of bending and stretching with circular type motion, and a biomimetic knee joint model, using a 3D printer. This system could be used to investigate the effects of rehabilitative joint motion of dynamic culture.

• 한국철도학회논문집
• /
• 제3권1호
• /
• pp.19-26
• /
• 2000

The rail temperature is important to preserve the joint gap for standard length of rail and to determine the installation temperature which has direct influence on the rail buckling and failure in welded part for continuous welded rail(CWR), Therefore, we have measured and investigated various characteristics of rail temperature for each kind of rail. As the results of this, the correlation between the atmosphere temperature and the rail temperature which is commonly used by Korean Railway should be reconsidered. Also, the daily highest '||'&'||' lowest rail temperature was occurred when each temperature is higher and when it's lower. For the light rail, the rail temperature by the sun-light increases quickly and decreases late. But the time where the highest temperature is attained is same. There are some differences between the shade and sunny place about 3.0∼4.0$\^{C}$. The temperature of rail web is almost close to the conversion rail temperature for rail expansion. The wind of 1 m/s has an influence on the rail temperature around 5$\^{C}$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권3호
• /
• pp.1140-1155
• /
• 2021

Up to now, many state-of-arts have been proposed for two-way relaying system with linear modulations. The performances of antenna selection (AS) at both transmit and relay nodes need to be investigated in some two-way relaying multiple-input multiple-output (TWRM) systems. In this paper, the goal is focused on the study of nonlinear modulations, i.e., continuous phase modulation (CPM) in TWRM systems. Firstly, the joint phase trellis are simplified by reversed Rimoldi processing so as to reduce the systems' complexity. Then the performances of joint transmit and receive antenna selection (JTRAS) with CPM modulations in two-way relaying MIMO systems are analyzed. More exactly, the pair wise probability (PEP) is used to evaluate the error performance based on the CPM signal matrix, which is calculated in terms of Laurent expression. Since the channels subject to two terminal nodes share common antennas at relay node R in multiple-access scheme, we revise the JTRAS algorithm and compare it to existing algorithm via simulation. Finally, the error performances for various schemes of antenna selection are simulated and compared to the analysis in this paper.