Browse > Article
http://dx.doi.org/10.12989/cac.2018.22.3.319

Effects of loading conditions and cold joint on service life against chloride ingress  

Yang, Keun-Hyeok (Department of Plant Architectural Engineering, Kyonggi University)
Mun, Ju-Hyun (Department of Plant Architectural Engineering, Kyonggi University)
Yoon, Yong-Sik (Department of Civil and Environmental Engineering, Hannam University)
Kwon, Seung-Jun (Department of Civil and Environmental Engineering, Hannam University)
Publication Information
Computers and Concrete / v.22, no.3, 2018 , pp. 319-326 More about this Journal
Abstract
RC (Reinforced Concrete) members are always subjected to loading conditions and have construction joints when constructed on a big scale. Service life for RC structure exposed to chloride attack is usually estimated through chloride diffusion test in sound concrete, however the test is performed without consideration of effect of loading and joint. In the present work, chloride diffusion coefficient is measured in concrete cured for 1 year. In order to evaluate the effect of applied load, cold joint, and mineral admixtures, OPC (Ordinary Portland Cement) and 40%-replaced GGBFS (Ground Granulated Blast Furnace Slag) concrete are prepared. The diffusion test is performed under loading conditions for concrete containing cold joint. Investigating the previous test results for 91 days-cured condition and the present work, changing diffusion coefficients with applied stress are normalized considering material type and cold joint. For evaluation of service life in RC continuous beam with 2 spans, non-linear analytical model is adopted, and service life in each location is evaluated considering the effects of applied stress, cold joint, and GGBFS. From the work, varying service life is simulated under various loading conditions, and the reduced results due to cold joint and tensile zone are quantitatively evaluated. The effect of various conditions on diffusion can provide more quantitative evaluation of chloride behavior and the related service life.
Keywords
service life; chloride ingress; stress; cold joint; GGBFS;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 RILEM (1994), "Durability design of concrete structures", Report of RILEM Technical Committee 130-CSL, E&FN, 28-52.
2 Song, H.W. and Kwon, S.J. (2009), "Evaluations of chloride penetration in high performance concrete using neural network algorithm and micro pore structure", Cement Concrete Res., 39(9), 814-824.   DOI
3 Tang, L. and Joost, G. (2007), "On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete", Cement Concrete Res., 37(4), 589-595.   DOI
4 Tang, L. and Nilsson, L.O. (1992), "Rapid determination of the chloride diffusivity in concrete by applying an electrical field", ACI Mater. J., 89(1), 49-53.
5 Thomas, M.D.A. and Bamforth, P.B. (1999), "Modeling chloride diffusion in concrete: Effect of fly ash and slag", Cement Concrete Res., 29(4), 487-495.   DOI
6 Thomas, M.D.A. and Bentz, E.C. (2002), Computer Program for Predicting the Service Life and Life-Cycle Costs of Reinforced Concrete Exposed to Chlorides, Life365 Manual, SFA, 12-56.
7 Tsao, W.H., Huang, N.M. and Liang, M.T. (2015), "Modelling of chloride diffusion in saturated concrete", Comput. Concrete, 15(1), 127-140.   DOI
8 Yang, K.H. and Kang, T.H.K. (2011), "Equivalent-strain distribution factor for unbonded tendon stress at ultimate", ACI Struct. J., 108(2), 217-226.
9 Yang, K.H., Cheon, J.H. and Kwon, S.J. (2017), "Modeling of chloride diffusion in concrete considering wedge-shaped single crack and steady-state condition", Comput. Concrete, 19(2), 211-216.   DOI
10 Yang, K.H., Mun, J.H., Cho, M.S. and Kang, T.H.K. (2014), "A stress-strain model for various unconfined concrete in compression", ACI Struct. J., 111(4), 819-826.
11 Choi, S.J., Kang, S.P., Kim, S.C. and Kwon, S.J. (2015), "Analysis technique on water permeability in concrete with cold joint considering micro pore structure and mineral admixture", Adv. Mater. Sci. Eng., 2015, 1-10.
12 Ye, H., Fu, C., Jin, N. and Jin, X. (2015), "Influence of flexural loading on chloride ingress in concrete subjected to cyclic drying-wetting condition", Comput. Concrete, 15(2), 183-198.   DOI
13 Yoo, S.Y. and Kwon, S.J. (2016), "Effects of cold joint and loading conditions on chloride diffusion in concrete containing GGBFS", Constr. Build. Mater., 115(2016), 247-255.   DOI
14 Abe, Y. (1999), "Result of reference review on crack width effect to carbonation of concrete", Proc. Symp.: Rehab. Concrete Struct., 1(1), 7-14.
15 ACI 224.3R-95 (2001), Joints in Concrete Construction, USA, American Concrete Institute, 389, Reapproved.
16 Arya, C. and Newmann, J.B. (1990), "Assessment of four methods of determining the free chloride content of concrete", Mater. Struct., 23(5), 319-330.   DOI
17 Banthia, N., Biparva, A. and Mindess, S. (2005), "Permeability of concrete under stress", Cement Concrete Compos., 35(9), 1651-1655.   DOI
18 Broomfiled, J.P. (1997), Corrosion of Steel in Concrete: Understanding, Investigation and Repair, E&FN, London.
19 Erdem, T.K. and Kirca, O. (2008), "Use of binary and ternary blends in high strength concrete", Constr. Build. Mater., 22(7), 1477-1483.   DOI
20 Escalante, J.I., Gomez, L.Y., Johal, K.K., Mendoza, G., Mancha, H. and Mendez, J. (2001), "Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions", Cement Concrete Res., 31(10), 1403-1409.   DOI
21 Hoseini, M., Bindiganabile, V. and Banthia, N. (2009), "The effect of mechanical stress on permeability of concrete: a review", Cement Concrete Compos., 31(4), 213-220.   DOI
22 Kwon, S.J. and Na, U.J. (2011), "Prediction of durability for RC columns with crack and joint under carbonation based on probabilistic approach", Int. J. Concrete Struct. Mater., 5(1), 11-18.   DOI
23 Ishida, T. and Maekawa, K. (2003), "Modeling of durability performance of cementitious materials and structures based on thermohygro physics", Proceedings of the 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures, Paris, France.
24 Ishida, T., Maekawa, K. and Kishi, T. (2007), "Enhanced modeling of moisture equilibrium and transport in cementitious materials under arbitrary temperature and relative humidity history", Cement Concrete Res., 37(4), 565-578.   DOI
25 JSCE- Japan Society of Civil Engineering (2000), Concrete Library, Concrete Cold Joint Problems and Countermeasures.
26 JSCE- Japan Society of Civil Engineering (2007), Standard Specification for Concrete Structures-Materials and Construction.
27 Kim, D.H., Lim, N.G. and Horiguchi, T. (2009), "Effect of compressive loading on the chloride penetration of concrete mixed with granulated blast furnace slag", J. Korea Inst. Build. Constr., 9(6), 71-78.   DOI
28 Kwon, S.J., Na, U.J., Park, S.S. and Jung, S.H. (2009), "Service life prediction of concrete wharves with early-aged crack: Probabilistic approach for chloride diffusion", Struct. Saf., 31(1), 75-83.   DOI
29 Lee, B.Y., Ismail, M.A., Kim, H.J., Yoo, S.W. and Kwon, S.J. (2017), "Numerical technique for chloride ingress with cover concrete property and time effect", Comput. Concrete, 20(2), 185-196.   DOI
30 Mun, J.M. (2016), Evaluation of Chloride Diffusion Coefficients in Cold Joint Concrete Considering Loading Conditions and Slag, Master's Degree, Hannam University.
31 Oh, K.S. and Kwon, S.J. (2017), "Chloride diffusion coefficient evaluation in 1 year-cured OPC concrete under loading conditions and cold joint", J. Korea Inst. Struct. Maint. Insp, 21(5), 21-29.   DOI
32 Poulsen, E. (1993), "On a model of chloride ingress into concrete, nordic miniseminar-chloride transport", Department of Building Materials, Chalmers University of Technology, Gothenburg.
33 Jang, S.Y., Karthick, S. and Kwon, S.J. (2017), "Investigation on durability performance in early aged high-performance concrete containing GGBFS and FA", Adv. Mater. Sci. Eng., 2017, 1-11.