• Proceedings of the Microbiological Society of Korea Conference
• /
• 2009.05a
• /
• pp.78-78
• /
• 2009

$^1H$ NMR spectroscopy coupled with multivariate statistical analysis was used for the first time to investigate metabolic changes in musts during alcoholic fermentation and wines during ageing. Three Saccharomyces cerevisiae yeast strains (RC-212, KIV-1116 and KUBY-501) were also evaluated for their impacts on the metabolic changes in must and wine. Pattern recognition (PR) methods, including PCA, PLS-DA and OPLS-DA scores plots, showed clear differences for metabolites among musts or wines for each fermentation stage up to 6 months. Metabolites responsible for the differentiation were identified to valine, 2,3-butanediol (2,3-BD), pyruvate, succinate, proline, citrate, glycerol, malate, tartarate, glucose, N-methylnicotinic acid (NMNA), and polyphenol compounds. PCA scores plots showed continuous movements away from days 1 to 8 in all musts for all yeast strains, indicating continuous and active fermentation. During alcoholic fermentation, highest levels of 2,3-BD, succinate and glycerol were found in musts with the KIV-1116 strain, which showed the fastest fermentation or highest fermentative activity of the 3 strains, whereas the KUBY-501 strain showed the slowest fermentative activity. This study highlights the applicability of NMR-based metabolomics for monitoring wine fermentation and evaluating the fermentative characteristics of yeast strains.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.104-107
• /
• 1994

A cone-type tower fermentor packed with Sacchromyces uvarum was employed to examine the continuous ethanol fermentation process. The maximum yeast concentration in the cone-type tower fermentor was 37.5-39.5g/$\ell$, the maximum ethanol productivity at the dilution rate of $hr^{-1}$ was 16.3g/$\ell$ . hr and the average ethanol yield was 0.48g EtOH/g glucose, which was 94% of the maximum theoretical yield. It was concluded that a cone-type tower fermentor might offer better perspectives for continuous ethanol fermentation.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.276-281
• /
• 2008

A flow injection analysis method (FIA), which analyzes sample conditions after injecting a sample and reagents into a continuous stream, are recognized as the most adequate analyzing method according to the increase of sampling frequency, the decrease of measuring time and the diversity of measuring targets. Specially, the FIA is considered to be used effectively for the control of a fermentation process to produce fermentation food and useful microbial production by activation of a fermentation industry for development of biological materials. In this study, a flow injection analysis sensor unit was developed for on-line monitoring of the fermentation process. The performance was verified by on-line measuring the concentration of glucose of the fermentation process of wine. The glucose concentrations of the samples were measured every 12 hours during the whole fermentation process and compared with those by a HPLC. The concentration relative errors of glucose on the fermentation process of wine showed below 30% within 72 hours and over 50% after the 72 hours. The sensor unit had potential to on-line monitoring of the fermentation process but some problems to overcome for an commercial application.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.4
• /
• pp.275-287
• /
• 2000

Fermentation strategies for recombinant protein production in Pichia pastoris have been investigated and are reviewed here. Characteristics of the expression system, such as phenotypes and carbon utilization, are summarized. Recently reported results such as growth model establishment, app58lication of a methanol sensor, optimization of substrate feeding strategy, DOstat controller design, mixed feed technology, and perfusion and continuous culture are discussed in detail.

• KSBB Journal
• /
• v.10 no.3
• /
• pp.231-236
• /
• 1995

For continuous ethanol production In an immobilized cell reactor consisting of Saccharomyces sake, feedings of one tenth to three tenths times diluted fermentation media were effective for maintaining the high ethanol productivity and physical stability of immobilized beads. In case two tenths times dilltued one of the fermentation medium supplemented with egg albumin hydrolysate(0.5%) and phosphatidylcholine(0.5%) was fed, a maximum ethanol productivity of $69 g/\ell$-hr was attained at a dilution rate of$1.1lhr^{-1}$, and it was 50% higher than that of the two tenths times diluted one of the fermentation medium without any supplement, $46 g/\ell$-hr.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.927-933
• /
• 2007

Waste activated sludge (WAS) was thermally pretreated to enhance hydrolysis and ultimately methane yield. Batch and semi-continuous anaerobic digestion were conducted to evaluate the performance of methane fermentation of the hydrolyzed sludge and to investigate the kinetics of sludge fermentation. Thermal pretreatment remarkably enhanced digestion performances particularly the methane fermentation with three times more methane production than before the pretreatment. Gas production and kinetic parameters in the semi-continuous anaerobic digestion were estimated using Chen Hashimoto model. The model simulation fitted well the experimental results and the model was shown to be suitable for evaluating the effects of disintegration of WAS in anaerobic digestion. Three parameters ($B_o$, K, and ${\mu}_m$) determined by model simulation were $0.0807L-CH_4/g-VS$, 0.453 and $0.154d^{-1}$ for control sludge, and $0.253L-CH_4/g-VS$, 0.835 and $0.218d^{-1}$ for thermally pretreated sludge, respectively.

• Microbiology and Biotechnology Letters
• /
• v.20 no.3
• /
• pp.324-328
• /
• 1992

In order to develop more economic processes, continuous ethanol fermentation from starchy raw materials in a pilot scale multi-stage CSTR was investigated. Ethanol fermentation could be successfully operated for 30 days with naked barley and 60 days with cassava, respectively. Starchy raw materials used for this study were ground and passed through a 20-mesh sieve for low temperature cooking. Under the optimized conditions, the overall productivity of cassava was $1.27g/{\ell}{\cdot}h$ with an ethanol concentration of 9.51% (v/v), which was higher about 2 times than that obtained from a conventional batch system in industrial scale.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.139-151
• /
• 2017

This study was conducted to confirm the rumen fermentation characteristics of large-scale CoenzymeQ10(CoQ10) producing bacteria R. spharoides in rumen. We conducted in vitro continuous culture test to investigate the characteristics of rumen fermentation with 5% R. spharoides as a direct fed microorganism. A rumen microbial fermentation characteristic has stability at after 12 days for 15 day of experimental period. pH value, NH₃-N, microbial protein synthesis, ADF digestibility and NDF digestibility were not shown significantly differences between control and treatment. However, UDP was significantly higher in treatment than control (p<0.05). CoQ10 concentration was 336.0mg/l with 5% R. spharoides. On the other hands, CoQ10 was not detected without R. spharoides. Our study was shown that R. spharoides can produce CoQ10 in rumen environment without harmful effects on rumen fermentation parameter. CoQ10 in rumen may transfer into cow milk through cow metabolism. This strategy might be helpful for producing functional dairy cow milk.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.961-965
• /
• 2007

In this study, degradation of carbohydrates and composition of fermentative products were investigated in semi-continuous acid fermenter varying hydraulic retention time (HRT). Rice soup was used as a sole substrate for the acid fermentation. Solubilization efficiency of the substrate was higher than 70% for all HRT, however the gas conversion was ignorable implying that most of organic contents in the influent remained in the form of volatile fatty acids (VFAs) and ethanol after acid fermentation. The VFAs were the predominant product and the VFAs conversion increased as the HRT decreased. The VFAs conversion reached the maximum value at 12 hr HRT accounting for 70% of the influent COD. Similar to VFAs, ethanol conversion was increased with the decrease of HRT and the maximum ethanol conversion efficiency was 8% at the HRT of 12 hr. Composition of VFAs was markedly dependent on HRT. As HRT increased, the composition of acetic acid was increased as a product of acetogenesis from butyrate, valerate and ethanol. This study demonstrated that HRT affected acid fermentation of a carbohydrate containing organic wastes producing VFAs and ethanol which could be effectively used to compensate the lack of carbon in wastewater for biological nutrient removal.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.147-156
• /
• 1994

A study was carried out for production of a pigment : bluish purple, using a mutant Streptomyces californicus KS-89-7. The mutant was induced from Streptomyces californicus KS-89 with N-methyl-N-nitro-N-nitrosoquanidin(MNNG). It was immobilized on an inert substance made of colloidal sillica and 3.5% sodium alginate with 1 to 10 ratio. The diameter of inert bead was 2mm, and number of immobilized mutant spore was approximately $1.0{\times}10^7$/ml. It was packed in a column reactor and fermentation was conducted with a substrate made of soluble starch 1%, glycerol 1.0%, sodium glutamate 0.1%, sodium nitrate 0.05%, L-prolin 0.025% and with some trace elements. The aeration for production of the pigment was 2.5m1/min with semi-continuous fermentation. The pigment production reached at peak on 8 days of fermentation, and the mutant produced the pigment 1.8 times more than its parent strain with the maximum pigment production of $1.72g/\ell$. The pigment production continued for 24 hours of fermentation, and at the end of the fermentation the mutant produced the pigment $1.52g/\ell$.