• 생명과학회지
• /
• 제21권1호
• /
• pp.127-133
• /
• 2011

${\beta}$-galactosidase를 공유결합으로 키토산 담체에 고정화하여 고정화 효소의 특성을 조사하였다. 또한 충진층 반응기에서 연속 조업을 실시하여 공정 최적화를 실시하였다. 키토산 담체에 대한 효소 고정화 효율은 최대 75%을 나타내었다. 고정화 효소에 대한 최적의 pH는 7.0이었고 최적의 온도는 $50^{\circ}C$였다. pH와 온도의 실험 범위에서 고정화 효소가 자유 효소에 비해 넓은 분포를 보여 pH와 온도에 덜 민감하게 작용하였다. 충진층 반응기에서 고정화 효소의 운전에 대한 수학적 모델을 세우고 수치적으로 해를 구하였다. 투입되는 유당의 농도와 유량에 대해서 충진층 반응기의 출구에서 유당의 전환율을 측정하였다. 실험 결과를 경쟁적 저해 효소 반응식과 물질전달 저항을 고려한 수학적 모델의 결과와 비교하였다. 모델의 결과는 실험 결과를 5% 이내의 오차로 잘 예측하였다. 그리고 충진층 반응기의 길이에 따른 유당 전환율과 연속운전 시간에 따른 효소의 비활성화를 고려한 전환율을 모델로부터 예측하였다.

• 한국시뮬레이션학회논문지
• /
• 제6권2호
• /
• pp.1-14
• /
• 1997

The characteristics of the flow and energy conversion in OMACON liquid-metal MHD system are investigated. Numerical simulation of two-phase flow in the OMACON system without magnetic field was carried out by the Phoenics code and the energy conversion characteristics are studied in association with the fact that the mechanical energy loss at the nozzle of the OMACON system are to be converted into electrical energy. In this system, working fluid (gas) is injected through the mixer located at the bottom of the riser, and is mixed with hot liquid metal. Therefore in the riser two-phase flow is developed under the influence of the gravity. In this study, the interaction between the gas and liquid is considered by the use of IPSA(InterPhase Slip Algorithm) where standard drag coefficient has been used. It has been assumed that in the flow regime the liquid is continuous and the gas is dispersed. For the liquid and gas, the continuity equations, momentum equations and energy equations are solved respectively in association with void fraction in the flow field. In order to calculate the energy conversion efficiency, firstly the ratio of the mechanical energy loss of liquid metal flow at the nozzle to the input thermal energy is considered. Secondly flow pattern of liquid metal in the generator has been analyzed, and the characteristics of the conversion of the mechanical energy into the electrical energy has been investigated. For an representative case where Hartmann number is 540 and magnetic field is 0.35 T, the present analysis shows that the energy conversion efficiency is 0.653. This result is considered to be reasonable in comparison with published experimental results.

• 한국표면공학회지
• /
• 제44권3호
• /
• pp.82-88
• /
• 2011

A uniform chromium-free conversion coating treated with an alkaline phosphate- permanganate solution was formed on the AZ 31 magnesium alloy. The effect of acid pickling on the morphology and on the corrosion resistance of the alkaline phosphate-permanganate conversion coating was investigated. The chemical composition and phase structure of conversion coating layer were determined via optical microscopy, SEM, EDS, XPS and XRD. Results show that the conversion coatings are relatively uniform and continuous, with thickness 1.8 to $2.4\;{\mu}m$. The alkaline phosphate-permanganate conversion coating was mainly composed of elements Mg, O, P, Al and Mn. The conversion-coated layers were stable compounds of magnesium oxide and spinel ($MgAl_2O_4$). These compounds were excellent inhibitors to corrosion. The electrochemical corrosion behaviors of coatings in 3.5 wt.% NaCl solutions were evaluated by electrochemical impedance spectroscopy, potentiodynamic polarization technique. EIS results showed a polarization resistance of $0.1\;k{\Omega}$ for the untreated Mg and $16\;k{\Omega}$ for the alkaline phosphate-permanganate conversion treatment sample, giving an improvement of about 160 times. The results of the electrochemical measurements demonstrated that the corrosion resistance of the AZ 31 magnesium alloy was improved by the alkaline phosphate-permanganate conversion treatment.

• 한국미생물·생명공학회지
• /
• 제19권1호
• /
• pp.70-75
• /
• 1991

Continuous and simultaneous production of gluconic acid and sorbitol from glucose and fructose was carried out by using glucose-fructose oxidoreductase and glucanolactonase of Zymomonas mobilis. In order to utilize the enzymes without purification, Zymomonas mobilis was permeabilized with toluene. Optimum conditions for permeabilization and reaction kinetics of permeabilized Zymomonas mobilis were studied. In batch operation with the permeabilized cells immobilized in alginate beads, about 90% conversion was obtained within 35 h reaction. Continuous production of gluconic acid and sorbitol using the immobilized permeabilized cells was carried out. Optimum conditions for continuous operation with the imn~obilized cells were; pH 6.2 and temperature $40^{\circ}C$. Maximum productivities for gluconic acid and sorbitol were about 14.5 g/l/h and 14.8 g/l/h respectively at the dilution rate of 0.075 $h^{-1}$ when 300 g/l each of substrates was fed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.468-473
• /
• 1998

A mathematical model was developed for a continuous re-actor in which free radical polymerization of methyl methacrylate (MMA) occurred. Elementary reactions considered in this study were initiation, propagation, termination, and chain transfers to monomer and solvent. The reactor model took into account the density change of the reactor contents and the gel effect. A control system was designed for a continuous reactor using extended Kalman filter (EKF) based non-linear model predictive controller (NLMPC) to control the conversion and the weight average molecular weight of the polymer product. Control input variables were the jacket inlet temperature and the feed flow rate. For the purpose of validation of the control strategy, on-line digital control experiments were conducted with densitometer and viscometer for the measurement of the polymer properties. Despite the com-plex and nonlinear features of the polymerization reaction system, the EKF based NLMPC performed quite satisfactorily for the property control of the continuous polymerization reactor.

• Journal of Radiation Protection and Research
• /
• 제6권1호
• /
• pp.8-24
• /
• 1981

This paper presents flux-to-dose-rate conversion factors for neutrons and gamma rays based on the American National Standard Institute(ANSI) N666. These data are used to calculated the dose rate distribution of neutron and gamma ray in radiation fields. Neutron flux-to-dose-rate conversion factors for energies from $2.5{\times}10^{-8}$ to 20 MeV are presented; the corresponding energy range for gamma rays is 0.01 to 15 MeV. Flux-to-dose-rate conversion factors were calculated, under the assumption that radiation energy distribution has nonlinearity in the phantom, have different meaning from those values obtained by monoetiergetic radiation. Especially, these values were determined with the cross section library. The flux-to-dose-rate conversion factors obtained in this work were in a good agreement to the values presented by ANSI. Those data will be a useful for the radiation shielding analysis and the radiation dosimetry in the case of continuous energy distributions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권8호
• /
• pp.3420-3436
• /
• 2020

Due to the increasing number of malicious software (also known as malware), methods for sharing threat information are being studied by various organizations. The Malware Attribute Enumeration and Characterization (MAEC) format of malware is created by analysts, converted to Structured Threat Information Expression (STIX), and distributed by using Trusted Automated eXchange of Indicator Information (TAXII) protocol. Currently, when sharing malware analysis results, analysts have to manually input them into MAEC. Not many analysis results are shared publicly. In this paper, we propose an automated MAEC conversion technique for sharing analysis results of malicious Android applications. Upon continuous research and study of various static and dynamic analysis techniques of Android Applications, we developed a conversion tool by classifying parts that can be converted automatically through MAEC standard analysis, and parts that can be entered manually by analysts. Also using MAEC-to-STIX conversion, we have discovered that the MAEC file can be converted into STIX. Although other researches have been conducted on automatic conversion techniques of MAEC, they were limited to Windows and Linux only. In further verification of the conversion rate, we confirmed that analysts could improve the efficiency of analysis and establish a faster sharing system to cope with various Android malware using our proposed technique.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.96-104
• /
• 2015

Reactivity of commercial WGS catalyst and four new catalysts(RMC-3, PC-73, PC-67SU, PC-59) manufactured with various compositions by Korea Electric Power Research Institute(KEPCO RI) were compared to select suitable WGS catalyst for SEWGS system. Steam/CO ratio, gas velocity, flow rates of syngas, and temperature were considered as operating variables. As a result, commercial catalyst showed the highest CO conversion and RMC-3 catalyst showed also high CO conversion. Therefore, commercial and RMC-3 catalysts were selected as applicable catalysts. However, PC-73 catalyst showed low CO conversion at low temperature($200^{\circ}C$) but showed good reactivity at high temperature($225{\sim}250^{\circ}C$), and therefore, PC-73 catalyst was selected as applicable catalyst for high temperature operation. Continuous operations up to 24 hours for those three catalysts(commercial, RMC-3, PC-73) were conducted to check reactivity decay of catalysts. All three catalysts maintained their original reactivity.

• Journal of Microbiology and Biotechnology
• /
• 제2권4호
• /
• pp.278-283
• /
• 1992

Aldehyde production by cells of a methanol utilizing yeast, Hansenula nonfermentans KYP-1 was improved when they were grown in a methanol-limited continuous culture, in comparison with cells grown in a batch culture. A higher cell yield was also obtained in continuous culture than in batch culture. This could be due to the fact that a lower methanol concentration was maintained in the jar fermentor to minimize growth inhibition by methanol. A maximum cell productivity of 0.219 g.$liter^{-1}.hr^{-l}$ and a cell yield of 47% were obtained at dilution rates of 0.1 $hr{-1}$ and 0.06 hr{-1}, respectively. The greatest amount of aldehyde was measured at a dilution rate of 0.08 $hr{-1}$. Under optimum reaction conditions, 915.7 mM of acetaldehyde was produced from 1.5 M ethanol after 21 hours reaction, with a conversion rate of 61%. Propionaldehyde and acrolein were produced with conversion rates of 32.7% and 44%, respectively.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1001-1009
• /
• 2000

본 연구는 온도와 pH변화에 따른 처리특성을 S-COD, T-COD, SS, 처리율의 경시변화, 슬러지전환율, SVI 및 유출수 pH의 변화 등을 중심으로 연속포기식과 간헐포기식의 활성슬러지법의 처리특성을 비교하였다. 실험결과 온도보청계수($\theta$)는 연속포기시 1.0~1.061, 간헐포기시는 1.0~1.086으로 나타나 극미하기는 하나 간헐포기시가 온도에 민감한 것으로 나타났으며, 슬러지전환율은 간헐포기시가 연속포기시에 비해 적은 것으로 나타나 보다 경제적이었다. 한편 pH를 변화시킬 경우 양 반응기 모두 산 쪽에서 미미한 악화를 보이나 알칼리 쪽에서는 개선됨을 보여주었고, 전체적으로 처리수의 수질과 유출수의 pH 변화폭 등을 고려할 때 연속포기시에 비해 간헐포기시가 양호하였다.