• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.249-260
• /
• 2004

The longitudinal steel connection of reinforced concrete bridge column is sometimes practically unavoidable, however the current Korean bridge design specifications have no special provisions about lap-splices of longitudinal steel. This paper reports experimental results of a research program investigating the seismic performance of circular RC bridge columns with respect to longitudinal steel connection detailing. Twenty-one circular column specimens were tested under quasi-static test. The columns with the entire longitudinal steel lap-spliced within plastic hinge region show relatively sudden strength degradation and low ductility than the columns with continuous longitudinal steel and the columns with half of longitudinal steel lap-spliced. However, the seismic performance of the column with mechanically connected longitudinal steel is similar to that of the column with continuous longitudinal steel. The final objectives of this study are to suggest appropriate longitudinal reinforcement connection details for the limited ductility design concept and to provide quantitative reference data and tendency for performance or damage assessment based on the performance levels such as cracking, yielding, collapse, etc. Ultimate displacement/drift ratio, displacement ductility, response modification factor, equivalent viscous damping ratio, residual deformation index, and effective stiffness are investigated and discussed in this paper.

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.625-633
• /
• 2003

For the construction of open-topped steel box girder bridges, prefabricated concrete slab could offer several advantages over cast-in-situ deck including good quality control, fast construction, and elimination of the formwork for concrete slab casting. However, precast decks without reinforcements at transverse joints between precast slabs should be designed to prevent the initiation of cracking at the joints, because the performance of the joint is especially crucial for the integrity of a structural system. Several prestressing methods are available to introduce proper compression at the joints, such as internal tendons, external tendons and support lowering after shear connection. In this paper, experimental results from a continuous composite bridge model with precast decks are presented. Internal tendons and external tendons were used to prevent cracking at the joints. Judging from the tests, precast decks in negative moment regions have the whole contribution to the flexural stiffness of composite section under service loads if appropriate prestressing is introduced. The validity of the calculation of a cracking load fur serviceability was presented by comparing an observed cracking load and the calculated value. Flexural behavior of the continuous composite beam with external prestressing before and after cracking was discussed by using the deflection and strain data.

• Agribusiness and Information Management
• /
• v.11 no.2
• /
• pp.16-24
• /
• 2019

BRIS has been established by the Ministry of Agriculture, Food and Rural Affairs since 2011 under Article 21 of the Act on the Preservation, Management and Utilization of Agricultural Life Resources. It is an information service that provides information related to agricultural life resources in connection with the Rural Development Administration, the Forest Service, and Korea Seed & Variety Service, Agricultural Resources and Agricultural and Livestock Quarantine Headquarters. The purpose of this study is to evaluate how the users assess the information system quality (information quality, system quality) for the current Bio Resource Information Service (BRIS). Ultimately, the structural equation modeling analyzes the causal relationship between each variable and how it responds to the user's continuous use intention. As a result, information quality among information system quality and information quality among system quality used as the main variables for the evaluation of BRIS were statistically positively influenced by users' perceived usefulness, while system quality It has been analyzed to have a positive effect on the sustained use intention. The user's continuous use intention is positively influenced by the information system quality and perceived usefulness at a statistically significant level. Especially, the perceived usefulness plays a role in mediating the user's continuous use intention.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.949-960
• /
• 2002

Flat plate structures under lateral load are susceptible to punching shear failure of the slab-column connection. To prevent such brittle failure, strength and ductility of the connection should be ensured. However, due to complexity in the behavior and difficulty in simulating the actual load and boundary conditions of the flat plate system, it is not easy to obtain reliable data regarding to the strength and ductility from the previous experimental studies. In the present study, a numerical study was performed for interior connections of continuous flat plate. For the purpose, a computer program for nonlinear FE analyses was developed, and the validity was verified by comparisons with the existing experimental results. Through the parametric studies, the variations of bending moment, shear, and torsional moment around the connection were investigated. Based on the findings of the numerical studies, the aspects which need to be improved in current design methods were discussed. The results of the present study will be used for developing a design method for the flat plate-column connection in the companion paper.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.796-805
• /
• 2005

Most rockfall prevention net among the rockfall prevention equipment that is constructed in around the road is actuality lack of function by quantitative research insufficiency etc.. Most of rockfall prevention net are composed to setting needle, perpendicular and horizontal wire rope and wire net. Also, function of rockfall prevention net depend on setting needle and the wire net and perpendicular and horizontal wire rope are fixed by setting needle. when unreasonable load is offered setting needle, rockfall prevention net can lose the function and happen continuous falling off of rockfall prevention net. Because rockfall prevention net have a such structural defect, improvement had been required in reply. So in this paper, spot application of Rock Bolt & Net Connection method and falling rock support ability are estimated by numerical analysis. As a result, when Rock Bolt & Net Connection Method is applied to cutting slope, decreases of stress and displacement is examined than current rockfall prevention net.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.464-468
• /
• 2008

The purpose of this study was to analyze the meaning about community and programs of community cases for community activation program development. Data were collected from literature and internet about community. Analyze community connection virtue research and domestic outside community cases and used content analysis method. The results of this study were showed as followings ; First, community which could preserve social interaction and continuous relation developing community activation program. Second, community could divide to ecotype community, life style community, school style community, bloc economy type community. Third, program of enforcing community activation was education, residing, employment connection program mainly.

• Computers and Concrete
• /
• v.19 no.4
• /
• pp.405-411
• /
• 2017

Carbon Fiber Reinforced Plastic (CFRP) has commonly been used to strengthen existing RC structures. Wrapping the whole component with CFRP is an effective method and simple to execute. Besides, specific configuration of CFRP sheets (L, X and T shape) has also been considered in some experiments to examine CFRP effects in advance. This study aimed to provide an optimal CFRP configuration to effectively retrofit the beam-column connection using continuous material topology optimization procedure. In addition, Moved and Regularized Heaviside Functions and penalization factors were also considered. Furthermore, a multi-material procedure was also used to compare with the results from the single material procedure.

• Journal of Chest Surgery
• /
• v.19 no.3
• /
• pp.528-533
• /
• 1986

Total anomalous pulmonary venous connection is relatively rare cyanotic congenital heart diaease, which represents 1-4% of all congenital cardiac defects. Generally in the majority cases, severe heart failure and cyanosis develops in the early infancy. Because of high mortality in the untreated infants and surgical risk, there are still many things to be improved. Two patients with total anomalous pulmonary venous connection are presented, which we recently experienced. The one was 10 year old female with supracardiac type drained through left innominate vein, and survived the operation and continuous to do well for 1 year. The other 5 year old female with mixed type (right pulmonary vein drained via coronary sinus and left pulmonary vein through left innominate vein) was operated successfully under hypothermia and extracorporeal circulation, and followed up for 6 months without problem. It was very rare case in the literature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.127-132
• /
• 2003

The purpose of current study is about how to construct wall-type APT in slip form and Deck plate applied different connection of materials that wall and slab. A proposal construct's solution is using the continuous a binding string that the main of contents are slab or stairs which horizon structure part construction is joined the vertical structure part, new we Proposed of 2 solution that new technology development. We'll suggest that the development is in the construct of higher stories APT more better other construction method. We expect that the new method is good but we have many things to solute themes. Thus, we decided that this development contents are needed that correct structural investigation and constructor's security of speciality and through a fact construct, correct verification.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.3
• /
• pp.61-68
• /
• 2019

A tensegrity module structure is suitable type for spatial structures. Because the tensegrity is composed of set of discontinuous compressive elements (struts) floating within a net of continuous tensile elements (cables), the system can provide the basis for lightweight and strong. However, despite the advantages of tensegrities, design and fabrication of the systems have difficulty because of form-finding methods, pin-connection and the control of prestress. In this paper, the new pin-connection method was invented to make the tensegrity module. The production process and practical implementation of uniformly compressed the tensegrity structures by using a UTM are described. Experiments showed the mechanical response and failure aspects of the tensegrity system.