Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Single and multi-material topology optimization of CFRP composites to retrofit beam-column connection

  • Dang, Hoang V. (Department of Architectural Engineering, Sejong University) ;
  • Lee, Dongkyu (Department of Architectural Engineering, Sejong University) ;
  • Lee, Kihak (Department of Architectural Engineering, Sejong University)
  • Received : 2015.10.05
  • Accepted : 2017.01.10
  • Published : 2017.04.25
⟨ Previous Next ⟩

Abstract

Carbon Fiber Reinforced Plastic (CFRP) has commonly been used to strengthen existing RC structures. Wrapping the whole component with CFRP is an effective method and simple to execute. Besides, specific configuration of CFRP sheets (L, X and T shape) has also been considered in some experiments to examine CFRP effects in advance. This study aimed to provide an optimal CFRP configuration to effectively retrofit the beam-column connection using continuous material topology optimization procedure. In addition, Moved and Regularized Heaviside Functions and penalization factors were also considered. Furthermore, a multi-material procedure was also used to compare with the results from the single material procedure.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea (NRF)

References

  1. Andreassen, E., Clausen, A., Schevenels, M., Lazarov, B.S. and Sigmund, O. (2011), "Efficient topology optimization in MATLAB using 88 lines of code", Struct. Multidiscipl. Optim., 43(1), 1-16. https://doi.org/10.1007/s00158-010-0594-7
  2. Antonopoulos, C.P. and Triantafillou, T.C. (2003), "Experimental investigation of FRP-strengthened RC beam-column joints", J. Compos. Constr., 7(1), 39-49. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:1(39)
  3. Bendsoe, M.P. (1989), "Optimal shape design as a material distribution problem", Struct. Optim., 17, 193-202.
  4. Bendsoe, M.P. and Kikuchi, N. (1988), "Generating optimal topologies in optimal design using a homogenization method", Comput. Meth. Appl. Mech. Eng., 71(2), 197-224. https://doi.org/10.1016/0045-7825(88)90086-2
  5. Bendsoe, M.P. and Sigmund, O. (1999), "Material interpolation schemes in topology optimization", Arch. Appl. Mech., 69(9), 635-654. https://doi.org/10.1007/s004190050248
  6. Bendsoe, M.P. and Sigmund, O. (2003), Topology Optimization:Theory, Methods and Applications, Springer, New York, U.S.A.
  7. Bruggi, M. (2010), "On the automatic generation of strut and tie patterns under multiple load cases with application to the aseismic design of concrete structures", Adv. Struct. Eng., 13(6), 1167-1181. https://doi.org/10.1260/1369-4332.13.6.1167
  8. Bruggi, M. and Taliercio, A. (2013), "Topology Optimization of the fiber-reinforcement retrofitting existing structures", J. Sol. Struct., 50(1), 121-136. https://doi.org/10.1016/j.ijsolstr.2012.09.009
  9. Buehler, M.J., Bettig, B. and Parker, G. (2004), "Topology optimization of smart structures using a homogenization approach", J. Intell. Mater. Syst. Struct., 15(8), 655-667. https://doi.org/10.1177/1045389X04043944
  10. Ghobarah, A. and Said, A. (2002), "Shear strengthening of beamcolumn joint", Eng. Struct., 24, 881-888. https://doi.org/10.1016/S0141-0296(02)00026-3
  11. Kim, Y., Ghannoum, W.M. and Jirsa, J.O. (2015), "Shear behavior of full-scale reinforced concrete T-beams strengthened with CFRP strips and anchors", Constr. Build. Mater., 94, 1-9. https://doi.org/10.1016/j.conbuildmat.2015.06.005
  12. Le-Trung, K., Lee, K., Lee, J., Lee, D.H. and Woo, S. (2010), "Experimental study of RC beamcolumn joints strengthened using CFRP composites", Compos. Part B-Eng., 41(1), 76-85. https://doi.org/10.1016/j.compositesb.2009.06.005
  13. Le-Trung, K., Lee, K., Shin, M. and Lee, J. (2011), "Analytical assessment and modeling of RC beam-column connections strengthen with CFRP composites", Compos. Part B-Eng., 42(7), 1786-1798. https://doi.org/10.1016/j.compositesb.2011.07.002
  14. Lee, E. and Martins, J.R. (2012), "Structural topology optimization with design-dependent pressure loads", Comput. Meth. Appl. Mech. Eng., 233, 40-48.
  15. Luo, Y.J., Kang, Z. and Yue, Z.F. (2012), "Maximal stiffness design of two-material structures by topology optimization with non-probabilistic reliability", Aiaa J., 50(9), 1993-2003. https://doi.org/10.2514/1.J051629
  16. Luo, Z., Wang, M.Y., Wang, S.Y. and Wei, P. (2008), "A level setbased parameterization method for structural shape and topology optimization", J. Numer. Meth. Eng., 76(1), 1-26. https://doi.org/10.1002/nme.2092
  17. Luo, Z., Zhang, N., Wang, Y. and Gao, W. (2013), "Topology optimization of structures using meshless density variable approximants", J. Numer. Meth. Eng., 93(4), 443-464. https://doi.org/10.1002/nme.4394
  18. Mlejnek, H.P. (1992), "Some aspects of the genesis of structures", Struct. Optim., 5(1), 64-69. https://doi.org/10.1007/BF01744697
  19. Pantelides, C.P., Gergely, J., Reaveley, L.D. and Nuismer, R. (1997), "Rehabilitation of cap beam-column joints with carbon fiber jackets", Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, Sapporo, Japan.
  20. Pantelides, C.P., Gergely, J., Reaveley, L.D. and Volnyy, V.A. (1999), "Retrofit of RC bridge pier with CFRP advanced composites", J. Struct. Eng., 125(10), 1094-1099. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:10(1094)
  21. Park, J. and Sutradhar, A. (2015), "A multi-resolution method for 3D multi-material topology optimization", Comput. Meth. Appl. Mech. Eng., 285, 571-586. https://doi.org/10.1016/j.cma.2014.10.011
  22. Rahimipour, A., Hejazi, F., Vaghei, R. and Jaafar, M.S. (2016), "Finite element development of a beam-column connection with CFRP sheets subjected to monotonic and cyclic loading", Comput. Concrete., 18(6), 1083-1096.
  23. Sigmund, O. (2001), "A 99-line topology optimization code written in Matlab", Struct. Multidisc. Optim., Springer-Verlag., 21(2), 120-127. https://doi.org/10.1007/s001580050176
  24. Sigmund, O. (2001), "Design of multiphysics actuators using topology optimization, part II: Two-material structures", Comput. Meth. Appl. Mech. Eng., 190(49), 6605-6627. https://doi.org/10.1016/S0045-7825(01)00252-3
  25. Sigmund, O. and Petersson, J. (1998), "Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh dependencies and local minima", Struct. Optim., 16(1), 68-75. https://doi.org/10.1007/BF01214002
  26. Song, L. and Yu, Z. (2015), "Fatigue performance of corroded reinforced concrete beams strengthened with CFRP sheets", Constr. Build. Mater., 90, 99-109. https://doi.org/10.1016/j.conbuildmat.2015.05.024
  27. Stainko, R. (2006), "An adaptive multilevel approach to the minimal compliance problem in topology optimization", Commun. Numer. Meth. Eng., 22(2), 109-118. https://doi.org/10.1002/cnm.800
  28. Tavakoli, R. (2014), "Multi material topology optimization by volume constrained allen-cahn system and regularized projected steepest descent method", Comput. Meth. Appl. Mech. Eng., 276, 534-565. https://doi.org/10.1016/j.cma.2014.04.005
  29. Tavakoli, R. and Mohseni, S.M. (2014), "Alternating active-phase algorithm for multimaterial topology optimization problems: A 115-line MATLAB implementation", Struct. Multidiscip. Optim., 49(4), 621-642. https://doi.org/10.1007/s00158-013-0999-1
  30. Wang, M.Y. and Wang, X.M. (2004), "Color level sets: A multiphase method for structural topology optimization with multiple materials", Comput. Meth. Appl. Mech. Eng., 193(6-8), 469-496. https://doi.org/10.1016/j.cma.2003.10.008
  31. Wang, Y., Luo, Z., Kang, Z. and Zhang, N. (2015), "A multimaterial level set-based topology and shape optimization method", Comput. Meth. Appl. Mech. Eng., 283, 1570-1586. https://doi.org/10.1016/j.cma.2014.11.002
  32. Xia, Q. and Shi, T.L. (2016), "Optimization of structures with thinlayer functional device on its surface through a level set based multiple-type boundary method", Comput. Meth. Appl. Mech. Eng., 311, 56-70. https://doi.org/10.1016/j.cma.2016.08.001
  33. Xia, Q., Shi, T., Liu, S. and Wang, M.Y. (2013), "Shape and topology optimization for tailoring stress in a local region to enhance performance of piezoresistive sensors", Comput. Struct., 114, 98-105.
  34. Xia, Q., Wang, M.Y. and Shi, T.L. (2014), "A level set method for shape and topology optimization of both structure and support of continuum structures", Comput. Meth. Appl. Mech. Eng., 272, 340-353. https://doi.org/10.1016/j.cma.2014.01.014
  35. Xia, Q., Wang, M.Y. and Shi, T.L. (2015), "Topology optimization with pressure load through a level set method", Comput. Meth. Appl. Mech. Eng., 283, 177-195. https://doi.org/10.1016/j.cma.2014.09.022
  36. Yao, J., Teng, J.G. and Chen, J.F. (2005), "Experimental study on FRP-to-concrete bonded joints", Compos. Part B-Eng., 36(2), 99-113. https://doi.org/10.1016/j.compositesb.2004.06.001
  37. Yurdakul, O. and Avsar, O. (2015), "Structural repairing of damage reinforced concrete beam-column assemblies with CFRPs", Struct. Eng. Mech., 54(3), 521-543. https://doi.org/10.12989/sem.2015.54.3.521
  38. Zhou, M. and Rozvany, G.I.N. (1991), "The COC algorithm, part II: Topological, geometry and generalized shape optimization", Comput. Meth. Appl. Mech. Eng., 89(1-3), 197-224.
  39. Zhou, S.W. and Wang, M.Y. (2007), "Multi-material structural topology optimization with a generalized cahn-hilliard model of multiphase transition", Struct. Multidiscip. Optim., 33(2), 89-111. https://doi.org/10.1007/s00158-006-0035-9

Cited by

  1. New form of perforated steel plate shear wall in simple frames using topology optimization vol.74, pp.3, 2017, https://doi.org/10.12989/sem.2020.74.3.325
  2. Study on the performance of concrete-filled steel tube beam-column joints of new types vol.26, pp.6, 2020, https://doi.org/10.12989/cac.2020.26.6.547