• Structural Engineering and Mechanics
• /
• v.89 no.2
• /
• pp.213-223
• /
• 2024

This paper proposes a composite design of fuzzy adaptive control scheme based on TMD RC structural system and the gain of two-dimensional fuzzy control is controlled by parameters. Monitoring and learning in LMI then produces performance indicators with a weighting matrix as a function of cost. It allows to control the trade-off between the two efficiencies by adjusting the appropriate weighting matrix. The two-dimensional Boost control model is equivalent to the LMI-constrained multi-objective optimization problem under dual performance criteria. By using the proposed intelligent control model, the fuzzy nonlinear criterion is satisfied. Therefore, the data connection can be further extended. Evaluation of controller performance the proposed controller is compared with other control techniques. This ensures good performance of the control routines used for position and trajectory control in the presence of model uncertainties and external influences. Quantitative verification of the effectiveness of monitoring and control. The purpose of this article is to ensure access to adequate, safe and affordable housing and basic services. Therefore, it is assumed that this goal will be achieved in the near future through the continuous development of artificial intelligence and control theory.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.556-567
• /
• 2019

As the number of skyscrapers in micro water grid units such as green building and smart building is increasing in the world, the green building certification system is being implemented to solve problems such as increased demand for water resources and energy. However, researches on the use of sustainable water resources like water reuse and water conservation through linkage and continuous use of water resources, while the power and energy sectors are actively conducting R&D projects in the green building certification system on the micro water grid level. Therefore, this paper analyzes the characteristics and limitations of the water resources sector for the continuous utilization of multiple water sources in the green building certification system, due to the inadequate consideration of sustainability. Then investigates whether various water resources such as constants, nature, and alternative water resources are continuously used in and out of the green building or smart building and complex in the micro water grid unit to suggest evaluation methods and performance evaluation standards.

• Science of Emotion and Sensibility
• /
• v.23 no.2
• /
• pp.51-60
• /
• 2020

This study aimed to develop a modular smart clothing system for heart rate monitoring that reduces the inconvenience caused by battery charging and the large size of measurement devices. The heart rate monitoring system was modularized into a temporary device and a continuous device to enable heart rate monitoring depending on the requirement. The temporary device with near-field communication (NFC) and heart rate sensors was developed as a clothing attachment type that enables heart rate monitoring via smart phone tagging when required. The continuous device is based on Bluetooth Low Energy (BLE) communication and batteries and was developed to enable continuous heart rate measurement via a direct connection to the temporary device. Furthermore, the temporary device was configured to connect with a textile electrode made of a silver-based knitted fabric designed to be located below the pectoralis major muscle for heart rate measurement. Considering the user-experience factors, key functions, and the ease of use, we developed an application to automatically log through smart phone tagging to improve usability. To evaluate the accuracy of the heart rate measurement, we recorded the heart rate of 10 healthy male subjects with a modular smart clothing system and compared the results with the heart rate values measured by the Polar RS800. Consequently, the average heart rate value measured by the temporary system was 85.37, while that measured by the reference device was 87.03, corresponding to an accuracy of 96.73%. No significant difference was found in comparison with the reference device (T value = -1.892, p = .091). Similarly, the average heart rate measured by the continuous system was 86.00, while that measured by the reference device was 86.97, corresponding to an accuracy of 97.16%. No significant difference was found in terms of the heart rate value between the two signals (T value = 1.089, p = .304). The significance of this study is to develop and validate a modular clothing system that can measure heart rates according to the purpose of the user. The developed modular smart clothing system for heart rate monitoring enables dual product planning by reducing the price increase due to unnecessary functions.

• Korea journal of population studies
• /
• v.11 no.1
• /
• pp.58-75
• /
• 1988

1.Objectives of the Study It is a well known fact that a prompt and reliable data on demographic information is essential in a proper planning and evaluation of any program of national or community level. Especially vital statistics are an important demographic component among demographic information. Realizing the importance of vital statistics, the government has made some efforts for years to improve the vital registration system which has a close relationship with the production of vital statistics. However, it is still observed that there are some limitations in utilizing vital registration data due to considerable amount of vital events which are never registered and registered but not in time or inaccurately, even though vital registration system in Korea has sound legal basis. In this connection, the objectives of the study is as follows :(1) To examine some problems of the vital registration system in various aspects, (2) To make improvement programme of continuous Demographic Survey as a supplementary source of vital statistics, and (3) To find out some alternatives for making it possible to produce and utilize the reliable vital statistics by developing analytical methodologies on that. 2. Current Situation of Vital Registration System All the vital events, i.e. births, deaths, marriages and divorces, are to be registered in time under the Civil Registration Law, Statistics Law and Regulation on Vital Statstics as a duty of people. Some recent tendencies in each of recent registration are summarized as below: (1) The completeness of vital registration .Out of all births which are occurred during a year, around 75% of those compared to the estimates are registered in the year of occurrence. .In case of death registration, the percentage of registration in the year of occurrene has been gradually increased from 86.2% in the year of 1980, but it is still below the level of 90% compared to the estimates. .The percentage of registration for marriages and divorces in the year of occurrence out of total registered numbers was revealed to be 69% and 73% respectively in 1985. (2) Continuous Demographic Survey .It is a kind of sample survey for the purpose of producing reliable vital statistics which could not be provided by the vital registration. .It covers about 17, 000 sample households at national level and important information for vital events are collected in every month by 323 expertized enumerators who are regular staff of the government. .Although the result of the survey seems to be more reliable than of vital registration, the reliability of the data is still bellow the acceptable level if compared with relevant information from other sources such as population census or special surveys. 3. Problems of Vital Registration System There are four major obstacles in improving vital registration system in Korea; (1) In general, policy priority is not given on any programme of improving vital registration system. It is, therefore, very difficult to formulate comprehensive programme through having cooperation from related authorities and sufficient financial assistance. (2) In all the laws related and system itself, there is substantial degree of overlap and irrationality. Registration of each vital event is maintained according to several laws and regulation such as Civil Registration Law, Statistics Law, Resident Registration Law and Regulation on Vital Statistics. However they are mutually overlapped and overall supervision can not be done systematically due to lack of co-operation among the authorities concerned. (3) The administration of vital registration system seems to be working inefficiently, because of most of civil servants who are in charge of vital registration are lacking of conception on vital statistics and also there is a certain extent of regidity in handling the works. Therefore, they are doing their jobs in a passive way. (4) A substantial proportion of vital events occurred is not registered within the legal time limit (i.e. within one month after the occurrence in case of birth and death) or not registered forever. Some of social customs and superstitution seem to be the potential causes especially in case of births and deaths. 4. Recommendations for the Improvement of Vital Statistics (1) Reporting systems such as civil registration, vital statistics and resident registration should be integrated under the single law. Also, administrative supervision, personnel and budget with regard to the registration system should be under the control of a single ministry. (2) It is necessary to simplify the procedures and methods of reporting vital events, i.e., reducing number of sheets of the form, making corrections easily, reducing registration items, etc. (3) Continuous Demographic Survey as a supplementary source of vital registration should be improved and special ad-hoc surveys should be conducted wth regular interval. (4) In-depth analysis should be done using various sources of data on vital statistics. 5. Concluding Remarks From this study, we can notice that temporary campaign and motivation programs are not sufficient to improve the quality of vital statistics. Strong intentions and continuous efforts of the government are needed for the improvement of the vital registration system. Furthermore, most of the data collected through the registration are not properly analyzed and utilized, partly due to the lack of appreciation among high-level governmental officials of the need for vital statistics. It is, therefore, requested that long-term improvement programs of vital statistics be implemented with policy priority and continuous efforts be given to this purpose as a long-term goal of development in Korea.

• The Korean Journal of Elementary Counseling
• /
• v.11 no.2
• /
• pp.193-217
• /
• 2012

The purpose of this study was to investigate and suggest directions and assignments of elementary school counseling based on positive psychology. For this purpose, the goal, contents, techniques and effects of counseling based on positive psychology were examined. Based on this review, the suggested implications for directions and assignments of elementary school counseling as follows; In connection with the directions of elementary school counseling, first, it was suggested that problem-focused counseling approaches centered a small number of problem children should be changed to strength based counseling approaches facilitating all children's whole development, happiness and well-being. Second, it was suggested that continuous and systematic counseling helps should be served to all children so that they can aware, experience and use their character strengths in their all lives at the inside and outside of their school. In connection with the assignments of elementary school counseling, first, increasing children's understanding on happiness, developing counseling programs for enhancing happiness and verifying their effects were discussed. Second, developing effective applying plans of positive counseling techniques and verifying their effects were discussed. Finally, making researches on our children's character strengths and interventions for developing their character strengths were discussed.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.79-87
• /
• 2017

Sandwich panels which are having the both sides are bonded with a heat insulating material with an iron plate are used as factories, warehouse structures as advantages of convenience in construction at economic efficiency of material cost. However, in a panel structure constructed by continuous joining of sandwich panels, a joint portion where a panel and a panel are connected is generated. The joint part is a part which is easily vulnerable to fire because flames easily flow into the melting and deformation of the iron plate during fire. The flames flowing into the panel induce diffusion of fire by rapid burning, causing damage of human life and property. In this research, we developed a flame spread prevention plate to prevent spreading of sandwich panel. This is an improvement of the workability by the anti-spreading construction method of the existing previous research, it can be applied independently to the connecting part where the panel and the panel are coupled, designed to prevent inflow and spreading of flame did. The actual fire test of the test method of KS F ISO 13784-1 of the sandwich panel specimen was conducted and the burning behavior corresponding to the presence or absence of application of the flame spread prevention plate was grasped at the panel connection part and its effect was measured. Inserting a fire spreading plate into the test result panel connecting part is measured by delaying the flashover, prevention of collapse of the specimen, and temperature rise of the opening, effectively improving the fire safety of the panel structure It was confirmed as a method that can be secured. It is judged that panel structure will contribute to ensuring fire safety by applying the fire spread prevention construction method of various methods ensuring the workability and economy of panel connection vulnerable to fire.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.92-99
• /
• 2013

As a recent cyber attack has a characteristic that is intellectual, advanced, and complicated attack against precise purpose and specified object, it becomes extremely hard to recognize or respond when accidents happen. Since a scale of damage is very large, a corresponding system about this situation is urgent in national aspect. Existing data center or integration security framework of computer lab is evaluated to be a behind system when it corresponds to cyber attack. Therefore, this study suggests a better sophisticated next generation convergence security framework in order to prevent from attacks based on advanced persistent threat. Suggested next generation convergence security framework is designed to have preemptive responses possibly against APT attack consisting of five hierarchical steps in domain security layer, domain connection layer, action visibility layer, action control layer and convergence correspondence layer. In domain connection layer suggests security instruction and direction in domain of administration, physical and technical security. Domain security layer have consistency of status information among security domain. A visibility layer of Intellectual attack action consists of data gathering, comparison, decision, lifespan cycle. Action visibility layer is a layer to control visibility action. Lastly, convergence correspond layer suggests a corresponding system of before and after APT attack. An introduction of suggested next generation convergence security framework will execute a better improved security control about continuous, intellectual security threat.

• Journal of Internet Computing and Services
• /
• v.20 no.5
• /
• pp.113-119
• /
• 2019

The key features of 5G mobile communications recently commercialized can be represented by High Data Rate, Connection Density and Low Latency, of which the features most distinct from the existing 4G will be low Latency, which will be the foundation for various new service offerings. AR and self-driving technologies are being considered as services that utilize these features, and 5G Network Latency is also being discussed in related standards. However, it is true that the discussion of E2E Latency from a service perspective is much lacking. The final goal to achieve low Latency at 5G is to achieve 1ms of air interface based on RTD, which can be done through Ultra-reliable Low Latency Communications (URLLC) through Rel-16 in early 20 years, and further network parity through Mobile Edge Computing (MEC) is also being studied. In addition to 5G network-related factors, the overall 5G E2E Latency also includes link/equipment Latency on the path between the 5G network and the IDC server for service delivery, and the Processing Latency for service processing within the mobile app and server. Meanwhile, it is also necessary to study detailed service requirements by separating Latency for initial setup of service and Latency for continuous service. In this paper, the following three factors were reviewed for initial setup of service. First, the experiment and analysis presented the impact on Latency on the Latency in the case of 1 Data Lake Setup, 2 CRDX On/Off for efficient power, and finally 3H/O on Latency. Through this, we expect Low Latency to contribute to the service requirements and planning associated with Latency in the initial setup of the required services.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.33-40
• /
• 2021

In recent years, many construction projects become large and complicated, and construction accidents also steadily increase, which grows interest in the safety and maintenance during construction. Many of the construction accidents are related to temporary construction and structures, but the safety evaluation and management during construction are unclear and indefinite due to the short operating period and continuous change in the formation of the temporary structure. The system support, which is one of the temporary structures to support the pouring load of concrete, was proposed to easily install and dismantle members with connection parts pre-manufactured. The use of the system support is increasing to improve the safety of the temporary structure during construction. However, the system support, which consists of multiple members, still has uncertainties in connectivity between members and supports of vertical members. Therefore, this study analyzed the structure, load, and accident cases of the system support to define the damage scenarios for member connection, support condition, and lateral displacement. The decrease rate of the critical load was analyzed according to the damage scenarios based on the defined unit structure of the system support. In addition, this study provided vulnerable members for each damage scenario, which could induce instability of the temporary structures during design, construction, and operation of the structure.

• Journal of Environmental Science International
• /
• v.32 no.12
• /
• pp.899-914
• /
• 2023

Various seeding materials for cloud seeding are being used, and sodium chloride powder is one of them, which is commonly used. This study analyzed the experimental results of multi-aircraft cloud seeding in connection with Republic of Korea Air Force (CN235) and KMA/NIMS(Korea Meteorological Administration/National Institute of Meteorological Sciences) Atmospheric Research Aircraft. Powdered sodium chloride was used in CN235 for the first time in South Korea. The analysis of the cloud particle size distributions and radar reflectivity before and after cloud seeding showed that the growth efficiency of powdery seeding material in the cloud is slightly higher than that of hygroscopic flare composition in the distribution of number concentrations by cloud aerosol particle diameter (10 ~ 1000 ㎛). Considering the radar reflectivity, precipitation, and numerical model simulation, the enhanced precipitation due to cloud seeding was calculated to be a maximum of 3.7 mm for 6 hours. The simulated seeding effect area was about 3,695 km², which corresponds to 13,634,550 tons of water. In the precipitation component analysis, as a direct verification method, the ion equivalent concentrations (Na⁺, Cl^-, Ca²⁺) of the seeding material at the Bukgangneung site were found to be about 1000 times higher than those of other non-affected areas between about 1 and 2 hours after seeding. This study suggests the possibility of continuous multi-aircraft cloud seeding experiments to accumulate and increase the amount of precipitation enhancement.