• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.141-147
• /
• 1998

Under high temperature and high pressure, cyanogen disinter gration distruction mechanism brought followings results through continuous plug flow reactor system. 1. The temperature was a important reacting factor in cyanogen disintegration. Over $612.8^{\cird}K$ high disintegration rate or 99.99% was shown even under $2000{\;}mg/{\ell}$ cyanogen density. 2. The conditions of cyanogen disintegration was gained through experimenting the supercrietical condition of water in basic. To gain 99.99% disintegration rate under $1000{\;}mg/{\ell}$ early cyanogen density, the pressure showed 52.8 seconds at $523^{\cird}K$ and 84.2 atm and gained $0.56{\;}mg/{\ell}$ operating density. 3. Here is the reaction velocity formula of cyanogen disintegration by hydrolysis: This formula indicates the high possibility of cyanogen disintegration within a short time. And it also implys the potential possibility on treating NBDICOD and the technology in developing the environment cleaning progress as small size automatic controlling equipment.

• Korean journal of food and cookery science
• /
• v.19 no.1
• /
• pp.24-33
• /
• 2003

The purpose of the study was to investigate the HACCP systems of contract foodservice establishments by surveying HACCP plans and prerequisite programs from the twelve HACCP-implemented contract foodservice establishments appointed by KFDA. All the subjects (100%) appeared to develop HACCP plans with their own hazard analysis. Except the two giving no response, it turned out that two establishments had 2 CCPs (20%), four had 4∼5 CCPs (40%) and another four had 9 CCPs (40%). Especially, 'cleaning and sanitizing of raw vegetables and fruits (90%)' and 'cooking (temperature) (100%)' were monitored as CCPs by all the subjects. Only one subject (8.3%) answered that continuous monitoring was not conducted. But the verification, record keeping and internal audits were maintained by all the subjects (100%). Most of the surveyed foodservice establishments maintained various prerequisite programs enough to back up HACCP system.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.143-146
• /
• 1996

A continuous potential pulse is applied to a silver-working electrode on a pulsed amperometric detector (PAD) for detection of free cyanide and sulfide. The moving phase is 0.1 M sodium hydroxide, 0.5 M sodium acetate and 5% (v/v) ethylenediamine mixture, and the flow rate is 0.7 mL/min. Optimized pulse conditions include a -200 mV (vs. Ag/AgCl reference electrode) detection potential(Ed) for 60 msec and 50 mV cleaning potential (Ec) for 120 msec. The silver working electrode surface is not poisoned by cyanide or sulfide, and the PAD maintains long-term stability without loss of sensitivity and reproducibility at these pulse conditions. The detection limit of cyanide and sulfide separated by ion chromatography using an anion exchange column is 0.1 ppm and 0.05 ppm, respectively.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.3
• /
• pp.7-16
• /
• 2020

Purpose: As communicable disease, COVID-19, pandemic strikes over the world, it is critically bewared that air travel possibly be a major pass way to deliver the infectious disease virus. Especially the airplane could be an unique environment to cultivate the virus spreaders. In order to keep the continuous safe airway as well as the industry, related international associations and organizations have been published the guidelines for the prevention and control the infectious disease through the all aspects of aviation. By reviewing the guidelines, focusing on the in-flight infection prevention and control, this study would not only inform a summary of the international guidelines but also provide an essential and general consideration for related research or guideline study. Methods: Guidelines of 5 major countries are reviewed, which has been seriously influenced by COVID-19 : U.S., Canada, E.U., Australia and China. The items of the guidelines are re-categorized as its similarity and structure by applicable cases. Results: The result of this study shows that each guideline seems to share a major structure and issue such as identifying sick traveler, sick passenger care, and cleaning even though that of China has a different since it used to consider the flight conditions based on 3 levels of infection risk. For sick passenger care, the guidelines includes crew safety, service level, sick passenger isolation, and cleaning. Implications: A published guideline as a public manual could be to prevent and control the in-flight infection efficiently and promptly. It also could provide a confidence of knowledge and educate for all users to prepare the in-flight emergency as well.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.10-19
• /
• 2006

Despite several recent attempts to measure the concentration of individual catechins by HPLC, it has not been so easy to separate catechins accurately. The aim of the present work is to provide a proper condition for separating each component of catechins by HPLC analysis, and also to evaluate the experimental variables including color differences, and metal ion contents after dyeing and mordanting. Four kinds of Catechins, (-)-epicatechin(EC), (-)-epicatechin gallate(ECG), (-)-epigallocatechin(EgC), (-)-epigallocatechin gllate(EgCG) were isolated from the residues after dyeing. Catechins in Korean green tea leaves are richer when e tea leaves are younger. Higher concentration of catechins owes it to e way it is processed. The contents of catechins adsorbed in silk fabrics after dyeing were in order of EGCG>ECG>EGC>EC. We have found $68\%$ uptake of EGCG, and 116.8mg of EGCG in the silk fabrics after it was dyed with $1\%$ Korean green tea extracts. The absorbance intensity and K/S values of dyed silk fabrics were increased with dyeing temperature and time. Only the surface color of the silk fabric dyed with green tea extracts was yellowish red, but it changed from yellowish red to red with an increase in the mordant concentration. Post-mordanted silk fabrics with ferrous sulfate changed from yellowish red to red and purple color shade. In a practical evaluation, there is no significant change in color after twenty times of the continuous dry cleaning process. However, post-mordanted fabrics with ferrous sulfate faded the brightness of color after dry cleaning. Dyeing silk fabrics with a Korean tea extract reduced the metal ion contents in the silk fabrics when compared to the untreated silk fabrics. Metal contents in silk fabrics dyed and post-mordanted with $1\%$ each metal solution were 0.194 ppm for Aluminum, 1.601ppm for Copper, and 0.334 ppm for Iron. After the post-mordanting process, the heavy metal ion absorption increased, which was mainly attributed to the catechins and polyphenols in dyed silk fabrics.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.361-366
• /
• 2001

It is difficult to obtain high Cu nucleation density and continuous Cu films in Cu-MOCVD without cleaning the TiN substrate prior to Cu deposition. In this study effects of plasma precleaning on the Cu nucleation density were investigated using SEM, XPS, AES, AFM analyses. Direct plasma pretreatment is much more effective than remote plasma pretreatment in enhancing Cu nucleation. Cleaning effects are enhanced with increasing the rf-power and the plasma exposure time in hydrogen plasma pretreatment. The mechanism through which Cu nucleation is enhanced by plasma pretreatment is as follows: Hydrogen ion\ulcorner in the hydrogen plasma react with TiN to form Ti and $NH_3$ Cu nucleation is easier on the Ti substrate than TiN substrate.

• Journal of Periodontal and Implant Science
• /
• v.32 no.3
• /
• pp.615-630
• /
• 2002

Various long-term studies have shown that titanium implants as abutments for different types of prostheses have become a predictable adjunct in the treatment of partially or fully edentulous patients. The continuous exposure of dental implants to the oral cavity with all its possible contaminants creates a problem. A lack of attachment, together with or caused by bacterial insult, may lead to peri-implantitis and eventual implant failure. Removal of plaque and calculus deposits from dental titanium implants with procedures and instruments originally made for cleaning natural teeth or roots may cause major alterations of the delicate titanium oxide layer. Therefore, the ultimate goal of a cleaning procedure should be to remove the contaminants and restore the elemental composition of the surface oxide without changing the surface topography and harming the surrounding tissues. Among many chemical and mechanical procedure, air-powder abrasive have been known to be most effective for cleaning and detoxification of implant surface. Most of published studies show that the dental laser may be useful in the treatment of pen-implantitis. $CO_2$ laser and Soft Diode laser were reported to kill bacteria of implant surface. The purpose of this study was to obtain clinical guide by application these laser to implant surface by means of Non-contact Surface profilometer and X-ray photoelectron spectroscopy(XPS) with respect to surface roughness and atomic composition. Experimental rough pure titanium cylinder models were fabricated. All of them was air-powder abraded for 1 minute and they were named control group. And then, the $CO_2$ laser treatment under dry, hydrogen peroxide and wet condition or the Soft Diode laser treatment under Toluidine blue O solution condition was performed on the each of the control models. The results were as follows: 1. Mean Surface roughness(Ra) of all experimental group was decreased than that of control group. But it wasn't statistically significant. 2. XPS analysis showed that in the all experimental group, titanium level were decreased, when compared with control group. 3. XPS analysis showed that the level of oxygen in the experimental group 1, 3($CO_2$ laser treatment under dry and wet condition) and 4(Soft Diode laser was used under toluidine blue O solution) were decreased, when compared with control group. 4. XPS analysis showed that the atomic composition of experimental group 2($CO_2$ laser treatment under hydrogen peroxide) was to be closest to that of control group than the other experimental group. From the result of this study, this may be concluded. Following air-powder abrasive treatment, the $CO_2$ laser in safe d-pulse mode and the Soft Diode laser used with photosensitizer would not change rough titanium surface roughness. Especially, $CO_2$ laser treatment under hydrogen peroxide gave the best results from elemental points of view, and can be used safely to treat peri-implantitis.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.159-169
• /
• 2016

Objectives: The objective of this study was to evaluate the generating characteristics of VOCs and the exposure effect to chemicals among laundry workers and to identify the current status of occupational safety and health through health check-ups. Methods: During the six-month period from April to September 2015, this study quantitatively measured seven VOCs in ten laundries and carried out health examinations on 35 workers. Results: Comparing the monitoring results for the ten laundries, they were classified into three groups by ventilation system, dry-cleaning and size of shop. The average concentration of toluene, chlorobenzene, xylene, ethylbenzene, benzene, styrene and TCE were 23.9, 15.6, 5.5, 2.8, 0.9, 0.3 and $1.3{\mu}g/m^3$, respectively. During dry-cleaning, VOC concentrations were 1.3-8.9 times higher than usual. On the other hand, at night the concentrations of toluene, chlorobenzene, xylene, ethylbenzene, benzene, styrene and TCE were 64.3, 41.5, 12.2, 6.3, 1.1, 1.2 and $6.6{\mu}g/m^3$, respectively. The health checkup results for the 35 workers showed that 13 workers were diagnosed as normal, while 22 workers were diagnosed as requiring continuous monitoring or re-checkup of liver and hematogenous functions. Conclusions: Although the results of exposure evaluation to VOCs did not exceed reference value and items had a low correlation with health checkup items, it is necessary to improve indoor air quality due to VOC volatilization from clothes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.1
• /
• pp.64-78
• /
• 2011

Surface of hydrophobic polyethylene membrane was modified to become hydrophilic by ion beam irradiation. Submerged membrane filtration reactors contained pristine membrane or surface-modified membrane and the influent to reactors was pickled radish wastewater. The objectives of this study was to investigate the variation of flux and pressure and the characteristics of pollutant removal such as organics, suspended solids and nutrients with time. The result of experiments using intermittent pristine membrane showed the occurrence of severe fouling by increasing permeate pressure rapidly in case of pickled radish wastewater but in synthetic wastewater, this phenomenon was not occurred. In experiments of variation flux after chemical cleaning and water cleaning in pristine membrane, chemical cleaning must be necessary for renewals of pollutant membrane. Performance of intermittent operation is higher than that of continuous operation. Reaching fouling time in the case of surface-modified membrane is 6 times as long as pristine membrane. According this reason, replacement expense of surface-modified membrane could be 1/6 of that of pristine membrane. Effluent from this process was relatively good water quality and performance in the removal efficiency of SS, nitrogen and phosphorus was particularly higher.

• Journal of Agricultural Extension & Community Development
• /
• v.11 no.1
• /
• pp.53-65
• /
• 2004

The purposes for this study was to provide information for developing educational programs for U-turn farmers' based on their needs on rural settlement. Special objectives of the study were; 1) to survey the general characteristics of U-turn farmers including motives. preparation, and education, 2) to investigate problems and difficulties of the U-turn farmers in rural settlement 3) to identify the reasons for success and failure in U-turn filming, and 4) to provide information in developing programs for U-turn farmers. Data for the study were collected from 526 U-turn farmers throughout the country, and after data cleaning, 494 questionnaires were used for data analysis. Based on the results of this study, the following were recommended for further development of U-turn farming programs; 1) to facilitate and expand continuous surveys on the motives. preparation, education and information for U-turn farmers will be neceassary to update the important and current information on U-turn farming. 2) Further examination of the problems and difficulties of U-turn farmers would be necessary to develop appropriate policies and educational programs for U-turn farming. 3) continuous investigations on the reasons for success and failure of U-turn farming would be necessary to develop appropriate apicultural policies. 4) for more effective educational programs for U-turn farmers. selection of educators, institution, curricular and timing etc. Should be carefully designed to meet the practical needs of the U-turn farmers. 5) more research activities should be encouraged to improve program development and implementation of U-turn farming.