• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.379-381
• /
• 1989

• Journal of Microbiology
• /
• v.44 no.4
• /
• pp.439-446
• /
• 2006

In this study, the growth kinetics of Lactobacillus rhamnosus and lactic acid production in continuous culture were assessed at a range of dilution rates $(0.05 h^{-1}\;to\;0.40h^{-1})$ using a 2L stirred tank fermenter with a working volume of 600ml. Unstructured models, predicated on the Monod and Luedeking-Piret equations, were employed to simulate the growth of the bacterium, glucose consumption, and lactic acid production at different dilution rates in continuous cultures. The maximum specific growth rate of L. rhamnosus, ${\mu}_{max}$, was estimated at $0.40h^{-1}$I, and the Monod cell growth saturation constant, Ks, at approximately 0.25g/L. Maximum cell viability $(1.3{\times}10^{10}CFU/ml)$ was achieved in the dilution rate range of $D=0.28h^{-1}\;to\;0.35h^{-1}$. Both maximum viable cell yield and productivity were achieved at $D=0.35h^{-1}$. The continuous cultivation of L. rhamnosus at $D=0.35h^{-1}$ resulted in substantial improvements in cell productivity, of 267% (viable cell count) that achieved via batch cultivation.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.329-331
• /
• 2000

A marine bacterium, Pseudomonas aeruginosa BYK-2 KCTC 18012P was immobilized in modified polyvinyl alcohol for the continuous production of rhamnolipids. The stability of rhamnolipids production, the mechanical strength of beads and the scanning electron microscope of immobilized cell were determined in a repeated batch culture. The rhamnolipids production was maintained $80{\sim}90%$ stability of initial production, and the mechanical strength also was stable during the repeated batch culture more than 14 cycles. In the case of SEM studies, the internal distribution pattern of the cell entrapped in modified PVA beads was observed. On the basis of optimal conditions, the continuous culture was investigated in 1.8L air lift bioreactor. The result suggested 0.1g/h rhamnolipids was obtained from 1%(v/v) fish oil continuously in conditions of 1.2L working volume, 0.5vvm and 20ml/h flow rate.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.597-606
• /
• 1992

Effects of dilution rate, inlet glucose and ammonium chloride concentrations on ,he performance of continuous culture of Alcaligenes eutrQPhus for poly-p-hydroxybutyrate (PHB) production were investigated. When inlet substrate concentrations were maintained constant (inlet glucose concentration = 20 g/l, inlet ammonium chloride concentration = 2 g/l), growth rate of residual biomass and PHB production rate showed its maximum at $0.1h^{-1}$ and $0.06h^{-1}$, respectively, and washout at $0.13h^{-1}$. PHB content decreased from 50% to 25% by increasing dilution rate, while specific PHB production rate increased continuously. Cell mass and PHB concentration gave its maximum values at inlet ammonium chloride concentration of 2 g/l and thereafter decreased, which showed the existence of substrate inhibition by ammonium. When inlet glucose concentration was 30 g/l, cell mass reached its maximum value, while PHB concentration increased continuously. The parameters of kinetic model were evaluated by the graphical and parameter estimation methods. The computer simulation results for the effects of dilution rate, inlet glucose and ammonium chloride concentrations fitted the experimental data very well.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.3
• /
• pp.374-380
• /
• 2006

In this study, glucose, sucrose, and dextrin were found to be better carbon sources for the production of pullulan by Aureobasidium pullulans HP-2001. Maximal production of pullulan with 200 g/l sucrose as a carbon source was 54.2 g/l. The highest yield of pullulan from sucrose was 0.40, when the sugar concentration was 100 g/1. Optimal conditions for the continuous production of pullulan by A. pullulans HP-2001 in a 7-1 bioreactor were determined by studying the effects of composition of feed solution, dilution rate, and concentration of sucrose in the feed solution. Pullulan concentration and productivity with 100 g/l glucose and 2.5 g/l yeast extract were 38.1 g/l and 0.53 g/l h for 72 h, respectively, in a batch culture of A. pullulans HP-2001. When the substituted medium contained 100 g/l sucrose, 2.5 g/l yeast extract, and mineral salts, which is the same composition as the medium for the production of pullulan, the pullulan concentration and productivity were 74.9 g/l and 0.55 g/l h for 120 h, respectively. The production of pullulan at the steady state increased with a dilution rate up to 0.015/h, and its concentration was 78.4 g/l with a weight average molecular weight ($M_w$) of $4.0{\times}10^5$. Unlike a batch culture, however, the decline of the $M_w$ and the number average molecular weight ($M_n$) of pullulan was not found in the continuous culture of A. pullulans HP-2001. When the concentration of sucrose in the feed solution was 200 g/l, 113.5 g/l of pullulan was obtained at the steady state. The steady state was maintained longer in the continuous culture fed with the feed solution containing 200 g/l sucrose than when fed with the feed solutions containing either 100 or 150 g/l sucrose.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.458-463
• /
• 2005

[ $H_2$ ] from CO and water was continuously produced in a trickle bed reactor(TBR) using Citrobacter amalonaticus Y19. When the strain C. was cultivated in a stirred-tank reactor under a chemoheterotrophic and aerobic condition, the high final cell concentration of 13 g/L was obtained at 10 hr. When the culture was switched to an anaerobic condition with the continuous supply of gaseous CO, CO-dependent hydrogenase was fully induced and its hydrogen production activity approached 16 mmol/g cell/hr in 60 hr. The fully induced C. amalonaticus Y19 cells were circulated through a TBR packed with polyurethane foam, and the TBR was operated for more than 20 days for $H_2$ production. As gas retention time decreased or inlet CO partial pressure increased, $H_2$ production rate increased but the conversion from CO to $H_2$ decreased. The maximum $H_2$ production rate obtained was 16 mmol/L/hr at the gas retention time of 25 min and the CO inlet partial pressure of 0.4 atm. The high $H_2$ production rate was attributed to the high cell density in the liquid phase circulating the TBR as well as the high surface area of polyurethane foam used as packing material of the TBR.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.2
• /
• pp.98-101
• /
• 1992

Continuous production of fructo-oligosaccharides employing a packed bed reactor charged with immobilized cells of Aureobasidium pullulans was investigated. The optimum conditions for reactor operation were a feed concentration of 860 g/l; a feed rate, expressed as superficial space velocity of $0.2\;h^{-1}$, and a temperature of $50^\circ{C}$. Under these optimum conditions, the productivity of the reactor was $180\;g/l\cdot{h}$. Initial activity was maintained for more than 100 days. The reactor was successfully scaled up to a production scale of 1000l.

• KSBB Journal
• /
• v.6 no.3
• /
• pp.249-254
• /
• 1991

Permeabilization of Zymomonas mobilis with CTAB(Cetyltrimethylammoniumbromide) was investigated in order to obtain stable process for sorbitol production in the immobilized system. The optimum conditions for sorbitol formation were obtained in the case of using cells treated with 0.2% CTAB at$ 4^{\circ}C$ for 10 min. Permeabilized cells were treated with glutaraldehyde to cross-link the internal enzyme for the improvement of the enzyme stability. In this way, no significant loss of enzyme activity was apparent during 30-day operation in a continuous process. The productivity of the continuous process at dilution rate 0.2h-1 was 6.51g/1/h for sorbitol. The CTAB permeabilized cells could be used to produce sorbitol in the long term continuous process.

• KSBB Journal
• /
• v.23 no.3
• /
• pp.199-204
• /
• 2008

Culture conditions for biological hydrogen production were investigated in wastewater of Takju manufacturing factory. Rhodobacter spaeroides KCTC1425, photosynthesis bacteria, and Enterobacter cloacae YJ-1, anaerobic bacteria were used. The hydrogen production were $195.3m{\ell}{\cdot}H_2/{\ell}$ broth for Rhodobacter spaeroides KCTC1425 and $271.8m{\ell}{\cdot}H_2/{\ell}$ broth for Enterobacter cloacae YJ-1 during 36 h. The hydrogen production increased with light intensity, and were highest over 12000Lux. In mixed culture of Rhodobacter spaeroides KCTC1425 and Enterobacter cloacae Y J-1, the optimum mixing ratio of hydrogen production was 20 and 80. Adding volume of yeast extract for maximum hydrogen production was 15 $g/{\ell}$, but there was no effect over that. $Na_2MoO_4$ was most effective among the inorganic salts, and the optimum volume was 0.4 $g/{\ell}$. In semi-continuous culture, total hydrogen production was $13086m{\ell}{\cdot}H_2/{\ell}$ broth for 144 h with operating period of 24 h.

• Journal of Environmental Health Sciences
• /
• v.30 no.2
• /
• pp.149-153
• /
• 2004

The influences of pH on hydrogen production were also investigated over the pH range from 4.1 to 8.0 at HRT 10 hours. The hydrogen content for the produced gas was changed from 41 to 71% with corresponding pHs throughout this experiment. The produced hydrogen/carbon dioxide ratio was not vary significantly up to 6.0, then steepenly increased with increases in the pH. The maximal hydrogen yield was found to be 3.16 $\ell$/g sucrose at pH 5.0. Acetate production yield increased with increased pH, but butyrate production yield decreased with increased pH. Biomass yield increased with increased pH.