• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.199-204
• /
• 2014

In binary solidification compositional convection in a porous mushy layer influences the quality of the final products. We consider the mushy layer solidifying from below with a constant solidification velocity. The disturbance equations for the mushy layer are derived using linear stability theory. The basic-state temperature fields and the distribution of the porosity in the mushy layer are investigated numerically. When the superheat is large, the thickness of the mushy layer is relatively small compared to the thickness of the thermal boundary layer. With decreasing the superheat the critical Rayleigh number based on the thickness of the mushy layer increases and the mushy layer becomes stable to the compositional convection. The critical Rayleigh number obtained from the continuity conditions of temperature and heat flux at the mush-liquid interface is smaller than that from the isothermal condition at the upper boundary of the mushy layer.

• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.193-215
• /
• 1991

This study is aimed at providing basic information applicable to setting up the education programs and strategies to prevent smoking among high school students by analysing smoking behavior and influencing factors. The samples consisted of 814 students, 557 parents and 362 teachers selected randomly from 8 high schools, one from each school district in Seoul. Date Analyses were made through Chi-Square test, Factor Analysis, One Way ANOVA, Multiple Regression, Correlation. SPSS/$PC^+$program was utilized. Smoking behavior (continuous smoking, re-smoking, ex-smoking, never smoking, daily smoking, occasional smoking) were used as dependent variables. Influencing factors (male students, habits, attitudes and knowledge toward smoking, home life, school life, juvenile delinquency, friendship, demographic parent's and teacher's recognition toward male students smoking) were used as in dependent variables. The major findings of the study are as follows : 1. The total smoking rate occupies 41.1% whereas the continuous smoking rate stands at 19.2%, re-smoking rate 9.5%, ex-smoking rate 12.4% and never smoking rate 58.9%. 2. The total smoking rate among high school students is significantly correlated with their monthly expenditures and type of school (p<0.001). The continuous smoking rate also shows the same tendency. As the length of butt get shorter, the current smoking rate increase. The duration of smoking is in proportion to its continuity. The major motive of smoking is curiousity whereas that re-smoking is to follow friend's behavior. The study shows that peer pressure is the most powerful factor influencing smoking behavior of students. Friends and fellow students encourage to pick up smoking and resume smoking even alter one stops smoking. 3. The correlationship between favorable attitudes toward smoking and the current smoking rate and its continuity is statistically significant(p<0.05, p<0.01, p<0.001). 4. The stability and harmony of family life and the current smoking rate show negative correlationship. The daily smoking amount of father is in proportion to the continuity of students' smoking. When parents are in favor of smoking, it is more likely that the experimental smoking rate increase the smoking rate increases, and vice versa. The more acceptable attitudes toward smoking among siblings is also one of the factors to increase the smoking rate and continuity (p<0.001). The more lenient the attitudes of parents toward their children's association with smoking friends, the higher the smoking rate. When students have difficulties in adjusting to school life, it is more likely that the current smoking rate and continuity increase. 5. The continuity of smoking and friendship are significantly correlated (p<0.05, p<0.01, p<0.001). 6. The continuity of smoking and juvenile delinquency are significantly correlated (p<0.001). 7. The difference in attitudes and smoking reasons of parents and students is significantly correlated to different smoking behavior (p<0.01, p<0.001). While smoking knowledge does not significantly influence their smoking behavior, it is noted that in the case of teachers, smoking reason (p<0.05), attitudes (p<0.001) and knowledge (p<0.05) strongly influence their smoking behavior. 8. There is a significantly correlation among the smoking reasons, attitudes and knowledge between students and parents(p<0.001). As for the correlationship between regularity and smoking amount and other influencing factors, the daily smoking amount is in proportion to depth of inhalation and duration of smoking, negative attitudes of parents unstability of family, dissatisfaction of family members, juvenile delinquency, strong smoking reasons and positive attitudes towards smoking. 9. In the case of daily smokers depth of inhalation is significantly correlated to the duration of smoking, juvenile delinquency, acceptability of parents, dissatisfaction of family members and smoking reasons. The duration of smoking motives is significantly correlated to juvenile delinquency, high acceptability of parents, strong smoking motive and positive attitudes toward smoking. 10. It is noted that 40% of parents and 30% of teachers do not recognize the significant correlationship between and the relative influencing factors mentioned above.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.160-170
• /
• 2006

If hydraulic pump controlled by mechanical type regulator has more than one control function, the construction of regulator will be very complicated and control performance falls drastically. It is difficult to have more than one control function for hydraulic pump controlled by electronic type hydraulic valve due to the inconsistency of controllers. This paper proposes a multi-function control technique which controls continuously flow, pressure and power by using EPPR(Electronic Proportional Pressure Reducing) valve in swash plate type axial piston pump. Nonlinear mathematical model is developed from the continuity equation for the pressurized control volume and the torque balance for the swash plate motion. To simplify the model we make the linear state equation by differentiating the nonlinear model. A reaction spring is installed in servo cylinder to secure the stability of the control system. We analyze the stability and disturbance by using the state variable model. Finally, we review the control performances of flow, pressure and power by tests using PID controller.

• Journal of Multimedia Information System
• /
• v.7 no.1
• /
• pp.55-72
• /
• 2020

As the IT service environment grows, it is critical in terms of IT service quality to minimize the occurrence of failures due to changes in applications and to diagnose and recover in a short period of time how failure will affect the business. Thus, the Defense Acquisition Program Administration (DAPA) has been building and operating ITSMs to implement IT service management in a leading manner. Information Technology Service Management (ITSM) is divided into events, obstacles, changes, versions and setup management to ensure flexibility and stability in service delivery. It is also operated separately from service level, availability, capacity, financial and IT service continuity management to ensure service quality and cost efficiency. Based on ITSM military service history, this study looks at the impact of quality of service on value, satisfaction, and trust. The results of the analysis are highly valuable for future ITSM implementation and operation.

• Economic and Environmental Geology
• /
• v.16 no.4
• /
• pp.257-268
• /
• 1983

The Cretaceous sandstone and felsite distributed in north-western border part of Taegu city were studied in the viewpoint of engineering geology with an emphasis of their discontinuities. The probability of continuity of sandstone is 0.69 and that of felsite is 0.56. The correlation coefficients of sandstone are 0.52 and 0.54. Those of felsite are 0.47 and 0.48. These values reflect that the rocks have been strongly jointed. $K_0$ value of the sandstone is close to its $K_a$ value and the test suggests that the sandstone has been in active state. On the other hand, $K_0$ value of the felsite is close to its $K_p$ value, which reflects that the felsite has been in passive state, in order to maintain the stability of the sandstone. $\delta$ value should be changed to be less than 13.2.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.4
• /
• pp.8-14
• /
• 2007

The electro-hydraulic pump is usually used in testing equipments which require one control function. But until now, it is not applied to industrial equipments which are exposed to severe working environment and require various control functions. This paper proposes a technique which controls continuously flow, pressure and power by utilizing switching control mode. Mathematical model is developed from the continuity equation for the pressurized control volume and the torque balance for the swash plate motion. To simplify the model we make the linear state equation by differentiating the nonlinear model. We analyze the stability and disturbance by using the state variable model. Finally, we review the control performances of flow, pressure and power by tests using PID controller.

• Journal of the Korean Mathematical Society
• /
• v.45 no.5
• /
• pp.1323-1339
• /
• 2008

In this paper, a new class of $(h,{\eta})$-proximal for proper functionals in Hilbert spaces is introduced. The existence and Lip-schitz continuity of the $(h,{\eta})$-proximal mappings for proper functionals are proved. A class of generalized nonlinear quasi-variational-like inclusions in Hilbert spaces is introduced. A perturbed three-step iterative algorithm with errors for the generalized nonlinear quasi-variational-like inclusion is suggested. The existence and uniqueness theorems of solution for the generalized nonlinear quasi-variational-like inclusion are established. The convergence and stability results of iterative sequence generated by the perturbed three-step iterative algorithm with errors are discussed.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.19-24
• /
• 2004

Frequency-space domain full-wave tomography is a promising technique for delineating detailed subsurface structure with high resolution. However, this method requires criteria for the selection of a set of optimal temporal frequency components, to achieve stability in the sequence of inversion processes together with computational efficiency. We propose a method of selecting optimal temporal frequencies, based on wavenumber continuity. The proposed method is tested numerically and is shown to be able to select an optimal set of frequency components that are sufficient to image the anomalies.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1057-1059
• /
• 1993

Some interested phenomena, which were appeared near the bonding interface, were investigated by angle lapping and delineation method, SEM, and TEM observations. Voids, defects, material continuity, and interfacial oxide stability were observed and discussed in the fusion-bonded Bi-Si or Si-$SiO_2$/Si wafer pairs.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.2
• /
• pp.41-48
• /
• 2023

In this study, simplified linear numerical method that can simulate wave generation and transformation by a moving bottom is introduced. Numerical analysis is conducted in wave number domain after continuity equation, linear dynamic and kinematic free surface boundary conditions and linear kinematic bottom boundary condition are Fourier transformed, and the results are expressed in space domain by an inverse Fourier transform. In the wavenumber domain, the dynamic free water surface boundary condition and the kinematic free water surface boundary condition are numerically calculated, and the velocity potential in the mean water level (z = 0) satisfies the continuity equation and the kinematic bottom boundary condition. Wave generation and transformation are investigated when the triangular and rectangular shape of bottoms move periodically. The results of the simplified numerical method are compared with the results of previous analytical solutions and agree well with them. Stability of numerical results according to the calculation time interval (Δt) and the calculation wave number interval (Δk) was also investigated. It was found that the numerical results were appropriate when Δt ≤ T(period)/1000 and Δk ≤ π/100.