• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.93-98
• /
• 1991

An improved and flexible matrix algorithm for solving interlinked separation problems which is based on the homotopy continuation method has been developed. A flexible model of the interlinked stream in standardized matrix form and JACOBIAN generation I algorithm for homotopy continuation are suggested. Also DOF analysis is performed for easy-understanding of equation based simulation of complex column systems. The Algorithm is tested on several problems of interlinked separation processes and some of results are documented.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.3
• /
• pp.190-196
• /
• 1999

Continuation power flow has been developed to remove the ill-condition problem caused by singularity of power flow Jacobian at and near at steady-state voltage instability point in conventional power flow. Continuation power flow consists of predictor and corrector. In prddictor, the direction vector at the resent solution is caluculated and the initial guess of next solution is determined at the distance of step length. The selection of step length is a very important part, since computational speed and convergence performance are both greatly affected by the choice of the step length. This paper presents the practical step length selection algorithm using the reactive power generation sensitivith. In numulation, the proposed algorithm is compared with step length selection algorithm using TVI(tangent vector index).

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.111-117
• /
• 2008

This paper presents a new continuation-based quasi-steady-state(CQSS) time-domain simulation algorithm incorporating a multiplicative aggregated load model for power systems. The authors' previous paper introduced a CQSS algorithm, which has the robust convergent characteristic near the singularity point due to the application of a continuation method. The previous CQSS algorithm implemented the load restoration in power systems using the exponent-based load recovery model that is derived from the additive dynamic load model. However, the reformulated exponent-based model causes the inappropriate variation of short-term load characteristics when switching actions occur, during time-domain simulation. This paper depicts how to incorporate a multiplicative load restoration model, which does not have the problem of deforming short-term load characteristics, into the time simulation algorithm, and shows an illustrative example with a 39-bus test system.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.899-901
• /
• 1998

Continuation power flow is a tool that can trace the path of the solution from the base stable solution. However, the base stable solution cannot be calculated when the initial system load is too large to operate at a stable operating point. This case is called as unsolvable case. This paper presents implementation of the optimal load shedding algorithm on continuation power flow. It performs steady-state analysis of power systems at unsolvable case that can occur in contingency analysis. Numerical simulation on 20-bus test system demonstrates that the continuation power flow applying the optimal load shedding algorithm is robust at solvable and unsolvable cases.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.553-558
• /
• 1995

The purpose of this paper is recovery of the profiles of the wave speed and density from the reflection coefficients of the continuously layered acoustic medium with depth dependent density and wave speed at various angles of incidence. A downward continuation or layer stripping algorithm, which recursively reconstructs the medium in increasing depth and then strips away the effects of the reconstructed portion of the medium, is the method with fewer computations than integral equation procedures. This paper implements an improved downward continuation algorithm that uses reflection data at several angles of incidence and performs a least-squares fitting at each depth. The result is a considerable improvement in performance over the usual downward continuation algorithm.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.13-16
• /
• 2000

Continuation power flow has been developed to remove the ill-condition problem caused by singularity of power flow Jacobian at and near steady-state voltage instability point in conventional power flow. When solving large-scale power transmission systems, continuation power flow require large computational costs. Therefore, technique to improve the speed of continuation power flow system was required. In this paper Decoupled Power Flow Method (DPFM), Enhanced Decoupled Power Flow Method (EDPFM), Robust Fast Decoupled Power Flow Method (RFDPFM) are applied to continuation power flow algorithm to improve the speed of continuation power flow system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.2
• /
• pp.78-84
• /
• 2000

This paper introduces a method of determining the maximum real power transfer limit of interface lines, which connect two areas of a power system, using locally parameterized continuation algorithm. This method traces the path of power flow solutions as interface flow is gradually increased under a certain load demand condition and finds the steady state voltage stability limit, the interface flow limit. Voltage stability index is used to indicate how close the maximum limit is reached. Also, this study presents a procedure to determine the security-constrained interface flow limit using the above method. Contingency ranking index is proposed to identify the severity of contingencies. The case study is performed according to the suggested procedure.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.894-896
• /
• 1997

This paper presents the continuation power flow system that is under development. The continuation power flow system provides robust solutions of power flow equations at any operating point. The robust convergency enables one to find solutions even at the point where power flow jacobian becomes singular. Basic concept of an algorithm and its application to static voltage stability analysis are presented.

• Journal of Information Technology Services
• /
• v.12 no.3
• /
• pp.331-343
• /
• 2013

In RFID systems, the anti-collision algorithm is being improved to recognize Tag's ID within recognition area of the reader quickly and efficiently. This paper focuses on Tag collision. Many studies have been carried out to resolve Tag collision. This paper proposes a new N-ary Query Tree Algorithm to resolve more than Tag collision simultaneously, according to the value of m(2 ~ 6). This algorithm can identify more tags than existing methods by treating a maximum 6 bit collision, regardless of the continuation/non-continuation Tag's ID patterns. So, it extracts maximumly different $2^6$ bit patterns per single prefix in recognition process. The performance of N-ary Query Tree Algorithm is evaluated by theoretical analysis and simulation program.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.643-648
• /
• 2011

This paper deals with the ESM(equivalent source method) with the continuation of acoustic near-field for NAH(near-field acoustic holography) to overcome the finite measurement aperture effect and reconstruct the normal velocity on an arbitrarily shaped structure surface. The continuation method is an extension of the measured sound field into a region outside and is based on the Green's function relating acoustic quantities on the two conformal surfaces. This algorithm is not limited to planar surfaces and can be applied to arbitrarily shaped surfaces. The ESM is an alternative approach of BEM-based NAH for the reconstruction on a general structure. In ESM the acoustic field is represented by a set of point sources located over a surface that is close to the structure surface. The simulation results of this study shows that the reconstruction error of particle velocity on the source surface is 11% and 16% for planar and cylindrical sources separately.