• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.458-463
• /
• 2009

This study was conducted to find out some conditions for optimum cultivation of Angelica gigas Nakai by the investigation of root yield and decursin content from different seeding sizes and accumulative temperature. Accumulative temperature from April to October was $4,309^{\circ}C$ on altitude 100 m, $4,242^{\circ}C$ on 250 m, $3,662^{\circ}C$ on 530 m, $3,435^{\circ}C$ on 730 m, and altitude 530~730 m was less $650{\sim}870^{\circ}C$ than altitude 100 m cultivation areas of A. gigas. Seedling stand rate was increased from 86.4% to more than 90% as accumulative temperature decreases, and was increased in above 7 mm of seedling size, and 10% in non-mulching more than PE film mulching. Yield was increased as accumulative temperature decreases and in PE film mulching as 310.2 kg/10a. Also, Yield was increased in 7~9 mm than seedling diameter 5~7 mm as 313.0 kg/10a. Decursin content of primary roots was increased as altitude rises, ie, as 2.55% on altitude 100 m, 3.33% on 250 m, 5.51% on 530 m, and 6.24% on 730 m. Decursinol angelate content appeared little than decursin content as 1.08% on altitude 100 m, 1.37% on 250 m, 1.99% on 530 m, 2.38% on 730 m, and as altitude was heightened, content was increased.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.4
• /
• pp.368-377
• /
• 2015

Bunker C fuel oil is a high-viscosity oil obtained from petroleum distillation as a residue. The sulfur content of bunker C fuel oil is limited to 4.0% or even lower to protect the environment. Because bunker C fuel oil is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, carbon dioxide is emitted as a result of combustion. The objective of this study is to investigate $CO_2$ emission characteristics of bunker C fuel oil by sulfur contents. Calorific values and carbon contents of the fuels were measured using the oxygen bomb calorimeter method and the CHN elemental analysis method, respectively. Sulfur and hydrogen contents, which were used to calculate the net calorific value, were also measured and then net calorific values and $CO_2$ emission factors were determined. The results showed that hydrogen content increases and carbon content decreases by reducing sulfur contents for bunker C fuel oil with sulfur contents less than 1.0%. For sulfur contents between 1.0% and 4.0%, carbon content increases as sulfur content decreases but there is no evident variation in hydrogen content. Net calorific value increases by reducing sulfur contents. $CO_2$ emission factor, which is calculated by dividing carbon content by net calorific value, decreases as sulfur content decreases for bunker C fuel oil with sulfur contents less than 1.0% but it showed relatively constant values for sulfur contents between 1.0% and 4.0%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.6
• /
• pp.914-918
• /
• 2018

Objective: The relationship between water-holding capacity (WHC) and intermuscular fat (IMF) was studied in Japanese commercial pork. Methods: Longissimus muscles of pigs (n = 62), obtained from two meat packing plants, were analyzed for IMF content, moisture content, drip loss, cooking loss, and pH. Pairwise relationships among these traits were determined using correlation analyses. Results: IMF content was significantly correlated with moisture content (r = -0.88; p<0.01) and pH (r = 0.32; p<0.05), but not with drip loss (r = -0.23; p = 0.07) or cooking loss (r = -0.10; p = 0.42). In contrast, drip loss was significantly (and negatively) correlated with pH (r = -0.57; p<0.01). Conclusion: IMF content was not significantly correlated with WHC in pork, and so ultimately, we consider pH to be one of the most important factors influencing WHC in pork meat.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.111-114
• /
• 2006

An alternative human interface enabling people with severe motor disabilities to control an assistive system is presented. Since this interface relies on the biosignals originating from the contraction of muscles on the face during particular movements, even individuals with a paralyzed limb can use it with ease. For real-world application, a dedicated hardware module employing a general-purpose digital signal processor was implemented and its validity tested on an electrically powered wheelchair. Furthermore, an additional attempt to reduce error rates to a minimum for stable operation was also made based on the entropy information inherent in the signals during the classification phase. In the experiments, most of the five participating subjects could control the target system at their own will, and thus it is found that the proposed interface can be considered a potential alternative for the interaction of the severely disabled with electronic systems.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.35-43
• /
• 2015

In this study, it was performed in characteristics of settlement of roadbed materials with variation of water content using cylinder model device. The ratio of settlement ($R_e$) of subgrade soils in the initial water content were about 2.08, whereas it was increased about 4.06 which resulted in increase two times in the initial water content. Also, it was monitoring long-term to measure variation of the field water contents at concrete track using rainfall measuring sensors. The water content at directly underneath of concrete track rarely seems to affect the variation of water content, but it was increased by about 4% than intial water content with 20 mm/hr rainfall index at slope section. As for the result from the field date, it was determined that the water content of the inner subgrade layer was rarely affect caused by more than 20 mm/h rainfall index during if good drainage system at concrete track properly maintained.

• Research in Mathematical Education
• /
• v.17 no.1
• /
• pp.47-61
• /
• 2013

This paper aims to explore whether Learning Study improves teachers' subject content knowledge, pedagogical content knowledge, and attitude toward teaching mathematics. A Learning Study was conducted in a Hong Kong primary school for a research lesson on comparing the size of fractions to explore the new teacher roles.

• 보존과학연구
• /
• s.31
• /
• pp.131-140
• /
• 2010

This study shows the comparison of chemical compositions of main component with other bronze bells after the research on the component analysis by non-destructive XRF analysis. There are shrinkage cavities caused by the shrinkage defect and pores with pollutants on Bronze Bell of Heungguksa Temple with gamma radiation images and 77.3% of copper, 8.4% of tin and 10.9% of lead were determined as the main components of it with XRF analysis The tin content of Brozen Bell of Heungguksa Temple is less than those (11~18%) of other bronze bells but the lead content of that is higher. The lead content of it shows 10.91% which is quite high while generally the lead contents of other bells were controlled lower than 2.1%. Buddhist bells have the different lead content according to the period. The lead content was low until Silla Dynasty and Unified Silla period but it has been getting higher since some point of Koryo Dynasty. It is assumed that expensive copper and tin were replaced with lead.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.55-55
• /
• 2022

Purple com Saekso 1 was developed by Maize Research Institute (Hongcheon, Gangwon, Korea) and registered in 2011. Saekso 1 is a anthocyanin-rich hybrid variety that is yellow grain, purple husk and cob. Purple husk and cob of Saekso 1 is as a resource for the bioactive material by health food. In order to investigate optimum sowing date and planting density of Saekso 1. Agronomic characteristics were compared by sowing times April 25, May 15 and June 5. Husk dry weight were 68,72 and 70kg·10a-1, respectively. Cob dry weight were 90, 92 and 92kg·10a-1, respectively. Content of cyanidin-3-glucoside in husk were 0.56, 0.62 and 0.56% and in cob were 0.19, 0.14 and 0.17%. Therefore, the sowing time to increase husk and cob weight and content of cyanidin-3-glucoside is appropriate for planting in mid-May. The number of plants in planting density trial was 9,400, 7,000, 5,700 and 4,700 plants in 10a area. Plant height at each trial were 249, 250, 246 and 248cm, respectively. Husk dry weight were 76, 67 and 63 and 60kg·10a-1, respectively. Cob dry weight were 112, 92, 87 and 81kg·10a-1, respectively. Content of cyanidin-3-glucoside in husk were 0.70, 0.71, 0.71 and 0.75% and in cob were 0.21, 0.28, 0.26 and 0.20%. Therefore, appropriate sowing time was in mid-May and planting density was 5,700~7,000 plants·10a-1 in order to increase the yield and content of cyanidin-3-glucoside of purple com in South Korea.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.865-867
• /
• 2008

A conventional environment adaptation for robust speech recognition is usually conducted using transform-based techniques. Here, we present a discriminative adaptation strategy based on a multi-condition-trained model, and propose a new method to provide universal application to a new environment using the environment's specific conditions. Experimental results show that a speech recognition system adapted using the proposed method works successfully for other conditions as well as for those of the new environment.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1153-1154
• /
• 2006

Effects of sintering conditions such as sintering temperature and heating rate on oxygen content, density, microstructure and toughness of sintered Mo were investigated. The oxygen content of the sintered Mo significantly depended on the sintering conditions. The oxygen content of the primary sintered(below 1673 K) Mo influenced the densifications. The number of pores at grain boundaries of the secondary sintered(at 2073 K)Mo depended on the oxygen content of the primary sintered Mo. Grain growth of the secondary sintered Mo was inhibited by the existence of pores at the grain boundaries. The secondary sintered Mo having larger number of pore and smaller grain size demonstrated higher strength.