의료 관련 감염을 예방하기 위한 필수적 방법은 일관성이 있는 감염감시 시스템을 구축하고 효율적인 감시 통제를 수행하기 위해 신뢰할 수 있는 상황에 대해 진단을 향상시켜나가는 것이다. 또한 의료 종사자의 손과 의복 및 장비는 환자 관리 및 환경과 접촉하여 병원체가 오염되는 요인이다. 병원체를 가진 시설 표면(예: 침대 레일, 침대 옆 탁자), 음용수, 냉각탑용수, 내시경기구, 급식위생, 공기매개, 멸균검사, 내독소검사, 및 의료 장비를 포함한 의료 환경의 오염은 일반적으로 발생한다. 또한 이러한 감염원을 활동 감시를 통해 MLST, PFGE의 기법으로 역학분석을 수행한다. 따라서 HAI 예방을 위한 환경 감시배양 검사는 환자의 안전과 감염원의 차단을 향상시킬 뿐만 아니라 국가의 감염관리 시스템을 통제하여 최적의 효율적인 감염관리 예방을 가능케 하고 국가의 감염관리 시스템의 안전을 향상시킨다. 결론적으로 감시배양 검사의 표준화를 통해 실효성 있는 감염관리체계에 이바지하고 감염관리 전문인력으로서의 전문성을 확보하고자 한다. 이를 통해 표준화 마련의 일차적인 목표는 의료관련 감염을 줄이고 국가적 의료관리 체계를 향상시키는데 있다.
Atomic force microscopy/friction force microscopy (AFM/FFM) techniques are increasingly used for tribological studies of engineering surfaces at scales, ranging from atomic and molecular to microscales. These techniques have been used to study surface roughness, adhesion, friction, scratching/wear, indentation, detection of material transfer, and boundary lubrication and for nanofabrication/nanomachining purposes. Micro/nanotribological studies of single-crystal silicon, natural diamond, magnetic media (magnetic tapes and disks) and magnetic heads have been conducted. Commonly measured roughness parameters are found to be scale dependent, requiring the need of scale-independent fractal parameters to characterize surface roughness. Measurements of atomic-scale friction of a freshly-cleaved highly-oriented pyrolytic graphite exhibited the same periodicity as that of corresponding topography. However, the peaks in friction and those in corresponding topography were displaced relative to each other. Variations in atomic-scale friction and the observed displacement has been explained by the variations in interatomic forces in the normal and lateral directions. Local variation in microscale friction is found to correspond to the local slope suggesting that a ratchet mechanism is responsible for this variation. Directionality in the friction is observed on both micro- and macro scales which results from the surface preparation and anisotropy in surface roughness. Microscale friction is generally found to be smaller than the macrofriction as there is less ploughing contribution in microscale measurements. Microscale friction is load dependent and friction values increase with an increase in the normal load approaching to the macrofriction at contact stresses higher than the hardness of the softer material. Wear rate for single-crystal silicon is approximately constant for various loads and test durations. However, for magnetic disks with a multilayered thin-film structure, the wear of the diamond like carbon overcoat is catastrophic. Breakdown of thin films can be detected with AFM. Evolution of the wear has also been studied using AFM. Wear is found to be initiated at nono scratches. AFM has been modified to obtain load-displacement curves and for nanoindentation hardness measurements with depth of indentation as low as 1 mm. Scratching and indentation on nanoscales are the powerful ways to screen for adhesion and resistance to deformation of ultrathin fdms. Detection of material transfer on a nanoscale is possible with AFM. Boundary lubrication studies and measurement of lubricant-film thichness with a lateral resolution on a nanoscale have been conducted using AFM. Self-assembled monolyers and chemically-bonded lubricant films with a mobile fraction are superior in wear resistance. Finally, AFM has also shown to be useful for nanofabrication/nanomachining. Friction and wear on micro-and nanoscales have been found to be generally smaller compared to that at macroscales. Therefore, micro/nanotribological studies may help def'me the regimes for ultra-low friction and near zero wear.
The Seokgatap pagoda composed of mainly alkali granite and other minor pink-feldspar granite, fine-grained granite, granodiorite, diorite, gabbro, and tuff. Despite the small loss and damage derived from joints, its peel-off and exfoliation are serious enough to cause the heavy deterioration on the stone surface. The chemical and petrological weathering has partly replaced the original rock-forming minerals with clay minerals and iron oxyhydroxides. Based on the petrogenesis, rock materials of the pagoda is very similar to rocks of Dabotap pagoda and the Namsan granite in the Gyeongju. The central fart of the pagoda has sunken highly, which caused all the corners to split and the structural transformation to become worse. The reverse V-shaped gaps between the materials have broken stones filled in a coarse way. The iron plates inserted between the upper flat stone laid on other stones and tile pagoda body in the north and east side has been exposed in the air and corroded, discoloring of the adjacent stones. The overall diagnosis of the Seokgatap pagoda is the deteriorated functions of the stone materials, which calls for a long-term monitoring and plans to reinforce the stone surfaces. But the main body including the pagoda roof stone needs washing on a regular basis, and the many different cracks should be fixed with glue by using the fillers or hardeners designed for stone cultural properties after removing the cement mortar. In case of the replacement of the stone materials with new stones, it's necessary to examine the pagoda for the center of gravity and support intensity of the materials. The structural stability of the pagoda can be attained by taking a reinforce measure in geotechnical engineering and making a drainage. The ground humidity, which has aggravated weathering and structural instability, should be resolved by setting up a humidity reduction facility. The contamination of lichens and bryophyte around the pagoda and on the surface is serious. Thus biochemical treatments should be given too in order to prevent further biological damages and remove the vegetation growing on the discontinuous planes.
부산시내 초등학교 4곳을 방문하여 급식소 환경 , 기계, 기구에 대해 HACCP 적용시 중점관리점을 파악하기 위하여 위생평가를 실시하였다. 환경에 대한 위해 요소분석 결과 위해도가 높은 지역과 낮은 지역이 확실히 드러났으며 위생에 특별한 주의를 기울여야 할 장소가 확인되었다. 위생평가시 조사한 21곳의 시료장소 중에서 급식소의 바닥과 스테인레스 스틸제재로 된 배수설비 표면에서 높은 수의 세균과 대장균 군이 관찰되었다. 또한 덤웨이터에서 가장 높은 수의 세균과 대장균군이 발견되었고 밥통, 칼, 도마, 고무장갑, 운반대, 비닐앞치마, 플라스틱 소쿠리, 프라이 팬, 냉장고내부에서도 높은 수의 미생물이 검출되었으며 특히 기구들을 건조시키는 공기건조대에서도 오염도가 심해 특별히 관리 해야되는 부분으로 확인되었다. 또한 급식소의 내부에서 사용되는 물건 중 스테인레스 스틸로 만들어진 운반대, 선반, 식판, 국통 등에서도 단위면적당 수천 마리의 미생물이 오염된 것으로 나타나 용기를 통한 식중독균의 오염이 우려되고 있다. 따라서 단체 급식소의 HACCP의 적용에 앞서 이들 장소에 대해 위생표준 관리기준(SSOP)에 의한 중점관리가 수행되어져야 하며 주기적인 미생물 검사를 실시하여 미생물의 오염상태를 점검해야 할 것이다. 또한 주방기구나 용기는 이물질을 먼저 제거하고 세척제를 사용하여 세척한 다음 소독제를 사용한 소독을 실시한 후 말려 재사용하는 방법 이 철저히 적용되어야 할 것이다.
The air abrasive technique is a non-mechanical method by which teeth are treated before restoration and stains and calculi are removed from tooth surfaces using the kinetic energy of small particles. The air abrasive technique in dentistry was first introduced in the 1950's with as instrument called 'Airdent'. But, as the main restorative materials of the period were amalgam and gold, and the instrument's inability to control the flow of particles caused the particles to be spread throughout the clinics, widespread use was not possible. In the 1990's, as these techincal problems were solved and more interest in new restorative materials rose in an effort to preserve sound tooth structure, new developements took place in instruments related to the air abrasive technique. The air abrasive technique produces less pressure, vibration and heat that might cause patient discomfort and facilitates the preservation of sound tooth structure. It also reduces the need for anesthesia and is less harmful to the pulp. Other advantages include increase in dentin bonding strength of composite resin, lower possibility of saliva contamination and maintenance of a dry field. But there is not direct contact between the nozzle and the tooth, the operator cannot use his or her tactile sense and must rely solely upon visual input. Other disadvantages are: the tooth preparation depends on the operator's ability; alpha-alumina particles, after bouncing off the tooth surface, cause damage to dental mirrors; the equipment is expensive and takes up a certain amount of space in the clinic. The author conducted case report using the air abrasive technique on patient visiting the Department of Pediatric Dentistry at Seoul National University Dental Hospital and arrived at the following conclusions. 1. The tooth preparation capability of different air abrasive devices varied widely among manufacturers. 2. It was more effective in treating early caries lesions and stains compared to lesions where caries had already progressed to produce soft dentin. 3. The cold stream and noise caused by the evacuation system was a major cause of discomfort to pediatric patients. 4. As there is no direct contact with tooth surface when using the air abrasive technique for tooth preparation, considerable experience and skill is required for proper tooth preparation.
우강 호상철광상은 북중국 남쪽 끝 부분의 타이후아 복합체에 위치 하고 있다. 본 연구에서는 우강 호상철광상에서 산출되는 철광석 시료의 전암 분석 결과의 해석을 통하여 우강 호상철광상의 유형과 성인을 이해하고자 하였다. 이 광상의 철광석의 조직은 밴딩 구조가 약하게 나타나는 것과, 밴딩 구조가 나타나지 않는 것 두 가지로 분류할 수 있다. 주요 구성 광물들은 조립질의 자철석, 석영, 휘석, 각섬석 등이다. 지구화학적 연구 결과 우강 호상철광상은 해수와 0.1~1 %를 차지하는 열수로부터 철을 공급받아 형성 되었다. 또한 이 과정에서 육지성 물질로부터의 철 공급이 있었음을 확인하였다. 이전 연구 결과와 종합해 보았을 때, 대부분의 철광석에서 Ce 이상치는 뚜렷하게 나타나지 않지만 일부 철광석에서는 음의 Ce 이상치를 보였다. 이러한 결과는 우강 호상철광상은 환원 환경이 우세한 해양 환경에서 형성되었지만, 상대적으로 산화된 해양의 표층 환경의 가능성을 제시해 준다. 이러한 지구 화학적 특징을 바탕으로 우강 호상철광상이 형성된 지구조적인 환경은 대륙붕 연안이나 후열도 분지환경이라 생각된다. 또한 우강 호상철광상은 혼성암, 각섬석 편마암, 규암, 대리암이 함께 산출되는데, 이는 연구 광상이 화산 활동과 밀접한 연관성이 없음을 지시한다. 본 연구에서는 지금까지 보고된 지구화학적 분석 결과와 이번 연구 결과를 종합해 우강 호상철광상이 슈피리어 유형 호상철광상의 특징을 보임을 확인하였다.
금속, 세라믹스, 플라스틱 등 고체의 표면에 적용되는 접착제와 페인트 도장막의 수요와 중요성은 점점 증가하고 있다. 본 연구에서는 금속 피착재에 고분자 재료인 접착제 혹은 페인트 도장막을 적용할 때, 이들 고분자 코팅층과 금속 피착재 사이의 접착강도 측정시 영향인자에 대한 연구를 돌리테스트로 수행하였다. 접착제로는 2액형 에폭시 접착제가 사용되었으며, 페인트로는 방청용 2액형 에폭시 페인트인 EH2350가 사용되었다. 특히, 영향인자로는 피착재의 종류(Al, Fe, STS, Cu, Zn), 표면거칠기 및 표면오염(수돗물, 소금물) 등을 선택해서 접착강도에 미치는 영향에 대해 연구하였다. 접착제와 피착재의 접착강도는 동일한 접착제를 사용해도 피착재의 종류가 달라지면 다르게 나타났으며, 수돗물 혹은 소금물로 산화 오염된 피착재의 표면은 페인트 도장공정 이전에 수돗물로 스프레이 세척이 필수적임을 알았다. 본 연구의 결과로 돌리테스트는 도장막과 피착재의 접착강도를 측정하는데 향후 널리 사용될 수 있음을 확인하였다.
본 연구에서는 가장 빈번하게 발생하는 세균성 식중독의 원인균인 C. jejuni의 주 감염원인 계육에 대하여, 식품공전에 등재된 식품첨가물 중 유화제를 이용하여 계육에서 C. jejuni의 부착을 제어 할 수 있는 기술을 확보하고자 하였다. 8종의 유화제를 200 mg/mL의 농도에서 paper disc agar diffusion method로 C. jejuni에 대한 항균활성을 검색한 결과 L-7D, L-1695, polysorbate 20, polysorbate 80 등 4종의 유화제에서 생육억제환을 생성하였다. L-7D, L-1695, polysorbate 20, polysorbate 80 4종의 유화제를 25, 50, 100, 200 mg/mL의 농도에서 항균활성을 검색한 결과, 농도가 작아질수록 생육억제환의 크기도 줄어들었으며, 유화제 중 L-1695 샘플이 200 mg/mL에서 가장 큰 생육억제환을 생성하였다. pH 및 열에 대해 안정성을 측정한 결과 L-7D, L-1695, polysorbate 20, polysorbate 80 4종의 유화제 모두 pH 및 열에 안정성을 가지고 있다는 것을 확인하였다. 최소저해농도를 측정한 결과 다른 유화제 L-7D, polysorbate 20, polysorbate 80 샘플과 비교하였을때 L-1695 샘플이 1.56 mg/mL에서 가장 좋은 최소저해농도를 나타냈다. 최소살균 효과는 L-7D, L-1695, polysorbate 20, polysorbate 80 4종의 유화제 모두 나타나지 않았다. 접촉표면의 부착제어능력을 확인하기 위해서 stainless steel과 ceramic에서 실험한 결과, 두 접촉 표면 모두에서 L-1695 샘플 처리 시 가장 적은 생균수를 나타냈다. 앞선 실험의 종합적인 결과에 따라 L-1695 유화제를 최종적으로 선별하고, 계육 피부에 부착된 C. jejuni에 영향을 주는지 CLSM으로 분석한 결과 대조구에 비하여 conventional spray 및 electrostatic spray를 처리하였을 때 모공에 부착된 균이 대다 수 떨어졌음을 확인하였다. 그러나 생균수를 확인해 본 결과 conventional spray와 electrostatic spray 처리 시에는 유의한 차이가 나타나지 않았다. 위 결과들을 종합한 결과 C. jejuni KCTC 5327에 대하여 L-1695 유화제는 생육을 억제시키지만, 살균효과는 없는 것을 확인하였다. 그러나 L-1695 유화제는 식품접촉표면에서 캠필로박터균의 부착을 저해하는 특성을 갖고 있으며, 계육 피부에 인위접종된 C. jejuni를 효과적으로 감소시키는 것을 볼 때, 실제 도계공정에서 세척수에 포함시켜 C. jejuni의 제어에 사용될 수 있을 것으로 기대된다.
Wild type Listeria monocytogenes 균주에 오염된 돈육으로부터 다른 돈육, 컨베이어벨트, 스테인리스 스틸로 일정시간(30, 60, 120분)동안 접촉시킨 후 $5^{\circ}C$와 $10^{\circ}C$에서 각각의 전이율을 조하였다. $5^{\circ}C$에서 돈육에서 돈육으로 L. monocytogenes의 평균 전이율은 30분에서 120분으로 시간이 지남에 따라 0.02%에서 0.42%로 증가하였고, 평균 전이율은 0.284%로 나타났다. 돈육에서 컨베이어 벨트와 스테인리스 스틸로의 평균 전이율은 30분 후 각각 0.05%, 0.002%의 전이율을 나타냈으나 120분 후에는 더욱 감소하여 0.013%, 0.0003%를 나타내었다(p < 0.05). 두 조건 모두 30분에서 가장 높은 전이율을 보였으나 120분 후에는 감소하였다. $10^{\circ}C$에서 돈육, 컨베이어벨트, 스테인리스 스틸 모두 60분에서 가장 높은 전이율을 나타냈지만 120분에서는 감소하였다. 반면에 식품접촉면에서 돈육으로의 전이율은 돈육에서 식품접촉면으로의 전이율 보다 높게 나타났다(p < 0.01). 시간대별로는 30분이 가장 높았으며, 시간의 경과에 따라 감소하였고 컨베이어벨트가 스테인리스 스틸보다 전이율이 높았다(p < 0.05). 상기의 결과로부터 돈육 공정과정의 오염원에 대한 미생물학적 계량모델을 제시하여 예측모델을 검증한 결과, 대부분의 전이율 예측모델이 신뢰도가 높게 나타났으며, 개발된 예측 모델은 교차오염 발생을 예방할 수 있을 것으로 기대된다.
세슘은 물속에서 고상보다는 이온이나 착염 등 용존 형태로 존재하는 특성이 강하여, 오염 수계로부터 세슘 제거가 어려운 것으로 알려져 있다. 최근 많은 연구들이 수계 내에서 세슘의 제거효율이 높은 흡착제를 개발하는데 집중하고 있다. 본 연구에서는 대나무 활성탄을 흡착제로 사용하여 수계 내에 존재하는 세슘을 효과적으로 제거하는 실내실험을 실시하였다. 수용액으로부터 대나무 활성탄의 세슘 제거효율을 측정하고, 최적의 세슘 제거능을 가지는 흡착 조건을 도출하고자 다양한 조건에서 흡착 배치실험을 수행하였다. 국내에서 유통되고 있는 5 종류의 대나무 활성탄의 표면 특성을 SEM-EDS와 XRD 분석으로 규명하였으며, 이 중에서 비표면적이 큰 3 종류의 대나무 활성탄을 대상으로 세슘 제거 배치실험을 실시하였다. 다양한 초기 세슘 농도를 가지는 인공수(0.01~10 mg/L 범위)를 대상으로 대나무 활성탄에 의한 수용액 내 세슘 제거량을 측정하여 제거효율을 계산하였고, 두 종류의 흡착 등온식들을 흡착 배치실험 결과에 대응시켜 흡착 상수값을 결정함으로서, 대나무 활성탄의 세슘 흡착 특성을 규명하였다. FE-SEM 분석 결과, 대나무 활성탄은 표면이 다수의 기공을 포함하는 대나무의 섬유질 조직을 그대로 유지하는 입자들로 구성되어, 이들 섬유질 조직 내 다양한 형태의 기공들과 엽상조직 표면들이 주요 세슘 흡착공간인 것으로 밝혀졌다. 흡착 배치실험 결과, C type 대나무 활성탄의 세슘 제거효율이 가장 높았는데, 특히 수용액의 세슘 초기 농도가 1.0 mg/L 이하인 경우에도 75 % 이상(최고 82 %)을 나타내어, 원전사고 등에 의해 오염된 현장 지하수나 지표수(해수 포함)의 세슘농도가 대부분 1.0 mg/L 이하임을 고려하면, 실제 오염수 정화 가능성이 높을 것으로 밝혀졌다. 수용액의 온도는 $5-15^{\circ}C$ 범위, pH는 3-11 범위에서 높은 세슘 제거효율이 일정하게 유지되는 것으로 나타나 다양한 오염수에 적용할 수 있을 것으로 판단되었다. 흡착 배치실험 결과는 Langmuir 흡착모델과 유사하였으며, C type 대나무 활성탄의 최대흡착농도($q_m:mg/g$)값은 63.4 mg/g으로 기존의 상용화된 흡착제 값보다 높았고, 수용액의 초기 세슘 농도가 1.0 mg/L이하인 경우 표면흡착률(surface coverage) 값도 낮게 유지되어, 적은 양의 세슘으로 오염된 수계를 효과적으로 정화할 수 있음을 입증하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.