• Korean Journal of Microbiology
• /
• v.1 no.1
• /
• pp.48-50
• /
• 1963

The authors have investigated about the microbial contamination of goods which is a criterion of hygienic control. Conducting on investigation, a special attention has been paid on the rate of microbial contamination in the goods, especially in manufacturing process of the softdrink. The authors also made an experiment on total microbes which is the criterion of contamination in each step of the process and in raw materials together with materials to be used for subdividing. Results obtained were as follows : 1) The orgin of microbial contamination was found in bottle cap and in tap water, that is, there appeared 9 colony per ml in bottle cap and 31-74 colony per ml in tap water, respectively. 2) It was found that microbial contamination are 4 colony per ml in average through year. However, it appeared 1 colony per ml in winter and 8 colony per ml in summer. 3) Coliform groups are not detected in goods through a year. 4) There was no variation in number of total microbes after ion exchange resin passage in purification process of tap water. 5) The number of microbes in goods are decreased when the raw materials are treated in high temperature short time (HTST) sterilization.

• The Korea Journal of Herbology
• /
• v.22 no.4
• /
• pp.75-80
• /
• 2007

Objectives : This study was conducted to control microorganisms of deer antler products with ethanol and heat process. Methods : The deer antler of Cervus elaphus was used for this study. The sliced deer antler of market condition were processed with 70% ethanol only (酒洗) and 70% ethanol with heat (酒炙). The microorganisms were isolated and incubated on Luria broth (LB) plates at $37^{\circ}C$ for 24 h. Results : The number of isolated microorganism colony were 201.1, 33.5 and 2.0 ea from each sliced deer antler of market condition, 70% ethanol only and 70% ethanol with heat process, respectively. Conclusions : These results suggested that 70% ethanol with heat processing is effective for reducing microbial contamination of deer antler products.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.162-168
• /
• 2006

Recently, diagnosis techniques have been investigated to detect a Partial Discharge associated with a dielectric material defect in a high voltage electrical apparatus, However, the properties of detection technique of Partial Discharge aren't completely understood because the physical process of Partial Discharge. Therefore, this paper analyzes the process on surface discharge of polymer insulator using wavelet transform. Wavelet transform provides a direct quantitative measure of spectral content in the time~frequency domain. As it is important to develop a non-contact method for detecting the kaolin contamination degree, this research analyzes the electromagnetic waves emitted from Partial Discharge using wavelet transform. This result experimentally shows the process of Partial Discharge as a two-dimensional distribution in the time-frequency domain. Feature extraction parameter namely, maximum and average of wavelet coefficients values, wavelet coefficients value at the point of $95\%$ in a histogram and number of maximum wavelet coefficient have used electromagnetic wave signals as input signals in the preprocessing process of neural networks in order to identify kaolin contamination rates. As result, root sum square error was produced by the test with a learning of neural networks obtained 0.00828.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.6
• /
• pp.309-314
• /
• 1995

Samples were collected from a commercial ethanol production plant to enumerate the bacterial contamination in each step of a starch based ethanol production process. Though the slurry of raw material used in the process carried bacteria with various colony morphology in the order of $10^4$ per ml, only the colonies of white and circular form survived and propagated through the processes to the order of $10^8$ per ml at the end of fermentation. Almost all of the bacterial isolates from the fermentation broth were lactic acid bacteria. Heterofermentative Lactobacillus fermentum and L. salivarius, and a facultatively heterofermentative L. casei were major bacteria of an ethanol fermentation. In a batch fermentation L. fermentum was more detrimental than L. casei to ethanol fermentation. In a cell-recycled fermentation, ethanol productivity of 5.72 g $I^{-1} h^{-1}$ was obtained when the culture was contaminated by L. fermentum, whilst that of the pure culture was 9.00 g $1^{-1} h^{-1}$. Similar effects were observed in a cell-recycled ethanol fermentation inoculated by fermentation broth collected from an industrial plant, which showed a bacterial contamination at the level of 10$^8$ cells per ml.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.577-582
• /
• 2013

AZO (aluminum-doped zinc oxide) is one of the best candidate materials to replace ITO (indium tin oxide) for TCOs (transparent conductive oxides) used in flat panel displays, organic light-emitting diodes (OLEDs), and organic solar cells (OSCs). In the present study, to apply an AZO thin film to the transparent electrode of an organic solar cell, a low-temperature selective atomic layer deposition (ALD) process was adopted to deposit an AZO thin film on a flexible poly-ethylene-naphthalate (PEN) substrate. The reactive gases for the ALD process were di-ethyl-zinc (DEZ) and tri-methyl-aluminum (TMA) as precursors and H2O as an oxidant. The structural, electrical, and optical characteristics of the AZO thin film were evaluated. From the measured results of the electrical and optical characteristics of the AZO thin films deposited on the PEN substrates by ALD, it was shown that the AZO thin film appeared to be comparable to a commercially used ITO thin film, which confirmed the feasibility of AZO as a TCO for flexible organic solar cells in the near future.

• Particle and aerosol research
• /
• v.5 no.3
• /
• pp.95-109
• /
• 2009

A low temperature plasma process has been widely used for semiconductor fabrication and can also be applied for the preparation of solar cell, MEMS or NEMS, but they are notorious in the point of particle contamination. The nano-sized particles can be generated in the low temperature plasma process and they can induce several serious defects on the performance and quality of microelectronic devices and also on the cost of final products. For the preparation of high quality thin films of high efficiency by the low temperature plasma process, it is desirable to increase the deposition rate of thin films with reducing the particle contamination in the plasmas. In this paper, we introduced the studies on the generation and growth of nanoparticles in the low temperature plasmas and tried to introduce the recent interesting studies on nanoparticle generation in the plasma reactors.

• Journal of Environmental Policy
• /
• v.5 no.2
• /
• pp.27-47
• /
• 2006

Attempts were made to increase an efficiency of soil contamination investigation systems(SCISs) including Soil Contamination Fact-Finding Investigation Sites and Special Soil Contamination Management Facility Sites in Korea. In order to increase low efficiencies resulting from inappropriate SCISs, possible policy suggestions are driven based on the results from problem findings of Korean policy and comparisons of policies in industrialized countries including United States, United Kingdom, Germany, the Netherlands and Japan. First, functions of Soil Environment Conservation Act(SECA) on liability should be updated and reinforced to initiate a soil contamination investigation process for stakeholders including an owner(s) or a responsible party(ies) of the potentially soil contamination sites positively. Second, appropriate SCISs should be emerged for implementing the Soil Contamination Fact-Finding Investigation Sites and Special Soil Contamination Management Facility Sites properly. Stakeholders for the potentially contaminated sites should easily access and raise the soil contamination issues, and soil contamination investigation implemented by liable and profit environment (consulting) companies should be encouraged. Third, the soil contamination reporting system of SECA needs to change legally responsible. Further more, public announcement system showing soil quality of a site which exceeds a certain scale would be considerable. Fourth, liable environment (consulting) companies should legally execute Soil Environment Assessment of SECA.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.1
• /
• pp.5-13
• /
• 2011

This research proposed the space planing methode and diagrams of restaurant kitchens to improve hygiene by analyzing the related contents collected from books and researches in interior design and HACCP (Hazard Analysis and Critical Control Point). HACCP is an effective and scientific hygiene system for food safety in order to prevent cross-contamination from food hazards. Based on the analyses, improvement of food production environments like restaurant kitchens is necessary for food hygiene. The space planing methode of restaurant kitchens to improve hygiene are followings: The circulation planing is that the direction of movement of the food, workers, waste, and dishes should be fractionated and managed for cross-contamination prevention. The space separation planing is that the spaces in the kitchen should be classified and divided into contaminated area and non-contaminated and clean area depending on the degree of cleanliness. The zoning is space arrangement with feed-back process to check the possible points of cross-contamination and correct space arrangement until the possibility of cross-contamination disappear in kitchen. However, if cross-contamination is unavoidable in some points in restaurant kitchens, hygiene facilities such as washing rooms, pass rooms, and double doors with air-shower should be located in order to remove contamination.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2015

Particle contamination in a cleanroom is very complex with a complicated process and several pieces of spreading equipment. Detailed information on the locations of the contamination sources and the path of the contamination is needed for economical and efficient control of the contaminant particles in such a cleanroom. An allocation method was developed to quantitatively predict the contamination generated from the pollution sources. In this paper, we propose a zoning method to accelerate the computation time for estimating the contributions. Our results showed that we can quantitatively estimate the amount of contamination generated from pollution sources.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.23-29
• /
• 2014

We have studied on ozonate water cleaning mechanisms to apply in manufacturing process of 156 mm silicon wafer which is used in the solar cell fabrication. We have analyzed contamination sources on wafer surface which causes poor quality and performance of products in fabrication process, and examined cleaning process using ozonate water to eliminate it. Contamination sources consist of remaining material like organic matter in slurry and detergent and particles in sawing wire. Using this novel technology it is possible for the solar cell wafer to clean with low cost, high performance, and eco-friendly.