• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.821-826
• /
• 2003

Laboratory experiments were peformed to understand physical properties of soil-cement column under the influence of acidic flow including metal contaminants and its retaining capacity against metal migration. The contaminant used in this study was nitric acid with Cu and Cd. The Permeability of soil-cement column decreased when pH of the column began to drop below 12. Decreases in pH led to significant reduction of compressive strength of clayey soil-cement specimen, while relatively marginal reduction for sandy soil-cement specimen. The metal contaminants did not leachate from soil-cement column until pH of soil-cement dropped below 7∼8 for Cu and 9∼10 for Cd. Metal contaminants were precipitated and trapped inside the soil-cement column at pHs higher than those mentioned as verified with metal analysis and visual inspection. This indicated that soil-cement column not only performs well as a cut-off wall, but also helps alleviating the level of contamination of the surrounding environment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.126-133
• /
• 2013

Recently, it was reported that complaints about problems being experienced with the performance of vehicles operating on autogas in Korea. The problem was being assumed due to contaminants in LPG and an oily material which was being deposited in vaporizer, injector in LPG fuel system. This study is focused on the analysis of contaminant of automobile parts on LPG fuel system. The sampling points of contaminants are injectors, fuel filters, vaporizer in automobile equipment and it was also investigated by GC-MS, ICP-AES, SIMDIS and EDS. According to results, it was presumed that this contaminants had been analyzed plasticizers with hydrocarbons with high boiling point, Fe from steel corrosion, greases from gas station.

• Tribology and Lubricants
• /
• v.15 no.2
• /
• pp.131-140
• /
• 1999

This study dealt with some problems occurred in spectrometric oil analysis that has been popularly used for a machine condition monitoring in various fields of industry. One of the problems is that spectrometric technique could not analyze contaminants of large particle (larger than 10 $\mu\textrm{m}$) in lubricating oils. This limitation caused a serious problem in analyzing lubricated machine conditions since wear debris of large size represents better critical machine conditions. In this work, this problem was found to be solved by using a filtration method prior to spectrometric analysis. Another problem could be that spectrometric analysis is incapable of identifying contaminants. This nay mislead the result seriously in practice. This problem was surveyed by analyzing both various types of industrial lubricants and laboratory simulation tests, and the solutions to the problem were suggested in this work.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.6
• /
• pp.276-280
• /
• 2001

This paper presents the result of a study on the distribution characteristics of salt contaminants in the west coast region, from Inchon to Yearsoo, of South Korea. To evaluate the distribution characteristics of salt contaminants, we had measured the equivalent salt deposit density(ESDD) with brush wiping method for thirteen month(from May 1999 to June 2000). Under the consideration on the measuring interval and method, normalization method was applied for the ESDD data. Besides the measurement, the chemical analysis (chromatography) was carried to investigate the relationship, between the electrical property and the amount of specific ingredient, such as sodium, magnesium and chloride. From the result, we could get the representative value of contamination for each site and distribution characteristics of salt contaminants with the distance from sea in the west coast.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.23-33
• /
• 2003

The possibility of real time analysis about hot melt resins and pressure sensitive adhesives in newsprint stock was investigated by performing comparative tests using conventional image analysis method and real time contaminants analyzer. Based on the test results, the performance of real time contaminants analyzer in terms of detecting primary stickies in newsprint stock could be verified. Real time stickies analysis showed good precision and over-estimation of hot melt resins and under-estimation of pressure sensitive adhesives could be corrected by adapting new method. Real time analysis of primary stickies in the actual newsprint stock also showed good correlation with conventional image analysis and the performance of real time contaminants analyzer could be verified again. Adjustment of the contrast sensitivity of real time contaminants analyzer was enough to set the proper monitoring conditions for primary stickies in newsprint stock.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.442-447
• /
• 2006

In semiconductor manufacturing clean rooms, it becomes important to remove airborne molecular contaminants as well as particulate contaminant in outdoor air introduced into clean rooms. One suitable control technique for these chemical contaminants is air washing by water in an outdoor air handling unit. In order to enhance the removal efficiency of chemical contaminants the effect of adding a heating and humidifying process before an air washer was examined.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.67-77
• /
• 2013

To improve the energy efficiency of conventional thermal treatment, soil remediation with microwave has been studied. In this study, the remediation efficiency of contaminated soil with semi-volatile organic contaminants were evaluated with microwave oven and several additives such as water, formic acid, iron powder, sodium hydroxide (NaOH) solution, and activated carbon. For the experiment, loamy sand and sandy loam collected from Imjin river flood plain were intentionally contaminated with hexachlorobenzene and phenanthrene, respectively. The contaminated soils were treated with microwave facility and the mass removals of organic contaminants from soils were evaluated. Among additives that were added to increase the remediation efficiency, activated carbon and NaOH solution were more effective than water, iron powder, and formic acid. When 10 g of hexachlorobenzene (142.4 mg/kg-soil) or phenanthrene (2,138.8 mg/kg-soil) contaminated soil that mixed with 0.5 g iron powder, 0.5 g activated carbon and 1 ml 6.25 M NaOH solution were treated with microwave for 3 minutes, more than 95% of contaminants were removed. The degradation of hexachlorobenzene during microwave treatments with additives was confirmed by the detection of pentachlorobenzene and tetrachlorobenzene. Naphthalene and phenol were also detected as degradation products of phenanthrene during microwave treatment with additives. The results showed that adding a suitable amount of additives for microwave treatments fairly increased the efficiency of removing semi-volatile soil organic contaminants.

• Korean Journal of Veterinary Service
• /
• v.31 no.4
• /
• pp.547-554
• /
• 2008

Bacteriospermia is a frequent finding in fresh boar semen and can result in detrimental effects on semen quality and longevity. The objectives of this study was to evaluate types of bacterial contaminants in porcine fresh semen and the reducing effect of antibiotic and density gradient with percoll on the bacterial contaminants. Fresh semen was collected by gloved-hand method into a pre-warmed($37^{\circ}C$) thermostable bottle, and was inoculated onto blood agar and MacConkey agar, respectively. After incubated for 48 hour, 7.5% $CO_2$ at $37^{\circ}C$, bacterial colonies were selected and identified by Gram staining, oxidase test, catalase test and finally identified using API kits and Vitek system. Aerobic culture yielded a variety of bacteria from different genera. The most prevalent contaminant of fresh semen were Leclecia adecarboxylata, Acineobacter banmanni, Staphylococcus epidermidis, Staphylococcus cohni spp urealyticus, Proteus mirabilis. Most of identified bacteria were Gram(-) and non-pathogenic bacteria. It seems that bacterial contaminants in fresh semen were seem originated from multiple sources at the stud/farm, and were from animal and non-animal origins. Gentamicin treatment did not eliminate the bacterial contaminants completely but 3 step-density gradient with percoll completely removed the bacterial contaminants in fresh semen. Therefore, future study is necessary to prove that density gradient method with percoll can eliminate bacteria in fresh semen without significantly affecting sperm viability or function.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.365-375
• /
• 2016

This study was interpreted the forming process of surface contaminants on ten-story stone pagoda of Wongaksa temple, Seoul. Results of research, we estimated that black contaminants were formed by graphite stuck carbon in air pollution substance after that gypsum was generated by chemical weathering on stone pagoda. White contaminants were built by recrystallization of calcite that were made by decomposition of finishing materials and structure on the stone surface. To preserve a long-term of stone pagoda in Wongaksa temple, there were required that continuous monitoring, anticorrosion treatment and contaminants cleaning of protective facilities.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.8-14
• /
• 2018

We investigated the levels of microbial contaminants and microbial hazards during dried-laver processing. We analyzed 321 samples obtained from 18 dried-laver Pyropia spp. manufacturing facilities, including water, swab-, and processing samples as well as final products. The levels of microbial contaminants, including viable cell counts (VCC) and coliform bacteria, increased as processing progressed. The sanitary indicator bacterium, Escherichia coli, was not detected in the final products although VCC levels were high, generally exceeding 5 log CFU/g. We also investigated changes in microbial contaminants at each processing step. Both VCC and total coliform dramatically increased after 4 days of continuous processing, indicating that microbial contaminants originated, mainly, from cross contamination during processing.