• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.322-329
• /
• 2005

Viscous flows behind transom stern are analyzed based on CFD simulation results. Stern wave pattern is often complicated due to the abrupt change of stern surface curvature and flow separation at transom. When a ship advances at high speed, whole transom stern is exposed out of water, resulting in the so-called 'dry transom'. However, in the moderate speed regime, stern wave development in conjunction of flow separation makes unstable wavy surface partially covering transom surface, i.e., the so-called 'wetted transom'. Transom wave formation is usually affecting the resistance characteristics of a ship, since the pressure contribution on transom surface as well as the wave-making resistance is changed. Flow modeling for 'wetted transom' is difficult, while the 'dry transom modeling' is often applied for the high-speed vessels. In the present study CFD results from the RANS equation solver using a finite volume method with level-set treatment are utilized to assess the topology of transom flow pattern for a destroyer model (DTMB5415) and a container ship (KCS). It is found that transom flow patterns are quite different for the two ships, in conformity to the shape of submerged transom. Furthermore, the existence of free surface seems to after the flow topology in case of KCS.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.74-82
• /
• 2007

Recently, the erosion due to cavitation frequently occurs on a horn-type rudder of a high-speed large container carrier. It is necessary to understand the flow characteristics around a rudder in fully wetted and cavitating flow condition, and the process of generation and collapse of cavitation for a rudder design to minimize the cavity-induced erosion. The flow characteristics around a two-dimensional hydrofoil(NACA66) are investigated through the computational method utilizing a viscous flow theory applied to a cavitation model. The computational results from the viscous flow theory are verified by the comparison with the experimental results, and are compared with those from the potential flow theory. The effects of angle of attack, Reynolds number, cavitation number, and thickness ratio on the cavitating flow are also investigated.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.307-310
• /
• 2003

In the maritime container terminal, LMTT(Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV(Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.20-26
• /
• 2015

This paper introduces a computational method for analysis of the 6-DOF motions of a ship in waves using an overset grid technique which consists of inner and outer domains for representing body motions and numerical wave tank, respectively. High order interpolation scheme is employed to increase numerical accuracy over the interface where physical values, such as velocities and pressure, interact between the inner and outer domains. The numerical schemes and algorithm are addressed in the present paper. An application to motion of KCS container carrier in head waves is presented, and the comparison of responses on heave and pitch motions shows good agreement with those of model tests.

• 디지털산업정보학회논문지
• /
• 제11권3호
• /
• pp.145-158
• /
• 2015

Disposable marine product packaging materials such as wooden, Styrofoam, and corrugated cardboard boxes have a very low reuse rate, thus causing the logistics costs to rise and making it difficult to establish a unit load system for marine products. Disposable packing containers to be discarded are accompanied by resource and environmental issues home and abroad. Transportation vehicles for marine products have to return empty without loading different kinds of products after delivery due to the smell and properties of marine products, thus posing as an obstacle to logistics rationalization. In an effort to overcome those limitations, this study examined the stages of transportation including "producer-wholesale market in the producing area-commission merchant-wholesale market in the consumption area-commission merchant-quasi-wholesale market-consumer" and also analyzed the utilization and distribution of disposable packaging materials currently used in the circulation of marine products including wooden, Styrofoam, and corrugated cardboard boxes. Based on the analysis results, the investigator developed a logistics rationalization model capable of promoting semi-permanent reuse and lowering empty vehicle rate on return routes as an alternative to address environmental issues caused by disposable packaging materials, which have been an obstacle to the logistics rationalization of marine products, packaging costs in the process of repeating packing and unpacking at each stage of marine products circulation, and empty vehicle rates on return routes after marine products delivery.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.648-655
• /
• 2005

The resilient mounts of a diesel engine installed onboard a ship should be designed for both static and dynamic loads. If possible, the resonance frequencies of the six rigid body modes of the installation and the flexible modes of the engine support structure should not lie within the engine operation range. In this paper a design criterion is proposed to evaluate an isolation system which involves the summation of dynamic forces transmitted through the resilient mounts and elastic potential energy index stored in the mounts. A case study is also presented in which a diesel engine generator, which had an elastic foundation and was mounted in a 5500 TEU container vessel, was studied both theoretically and experimentally. The theoretical analysis of the test model was performed by using a single mass 6 degree of freedom system. Actual measurements of mechanical vibration of the Engine and its foundation onboard were carried out, which showed the importance of including the flexibility of the engine support structure in the mode

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.567-575
• /
• 2010

Ningbo Port develops quickly in recent years and with the combination of Ningbo Port and Zhoushan Port, it becomes another important port in the Shanghai International Shipping center. Competition between the two biggest ports in this area can't be avoided. The goal of this paper is investigating the competence of port from two angles, which are spatial structure of the ports cluster and neighboring ports' attraction to cargoes at conjunct hinterlands. The paper firstly uses the HHI index model and shift-share method to qualitatively and quantitatively analyze the data of container throughputs of ports in the shipping center, in order that investigates the spatial structure of ports cluster. Basing on above researches, the paper employs the location quotient to study Shanghai port and Ningbo port's hinterland distributions at Zhejiang province. The conclusion of this study:(I)the ports cluster of the Shanghai International Shipping Center is highly centralized, and undergoes a porcess of first centralization then decentralization since the mid of 90s, last century. (2)Hinterlands of Shanghai port includes: Hangzhou, Jiaxing, Huzhou and Quzhou districts; Hinterlands of Ningbo port includes: Ningbo, Taizhou and Zhoushan districts.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 춘계학술대회
• /
• pp.240-241
• /
• 2012

항만배후단지가 잠재수요 고객에게 시간과 비용을 절감할 수 있는 단순 기능에서 벗어나 통합 물류기능을 담당하는 미래형 물류배후공간으로 활성화 될 수 있도록 배후단지를 구성하는 요인들을 평가하고 전략을 도출하는 것이 중요하다. 따라서 광양항 컨테이너터미널 배후단지 활성화에 필요한 요인들을 도출하고, 실증평가를 통해 활성화에 필요한 요인의 우선순위와 전략들을 제안하고자 한다. 배후단지 활성화 요인은 델파이기법을 이용한 전문가 조사를 통해 선정하고, 선정된 배후단지 활성화 요인에 대한 측정영역과 요인들을 평가하는데 있어 다기준의사결정 모델인 AHP(Analytic Hierarchy Process)를 이용한다. 또한 분석방법으로 언어척도의 애매모호하고 불확실한 상황을 고려하여 가치판단에 있어 정교함이 더해진 방법론으로 평가되고 있는 퍼지이론을 결합한 Fuzzy-AHP를 적용한다.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3185-3194
• /
• 1994

In this study, an impact model and impact response analysis method was suggested for the impacts between arbitrary shaped bodies. Unlike the impacts between geometrically simple structures, there is no rules to analyze the impacts between general elastic structures First of all, it has been attempted to explain the impoot between arbitrary elastic structures as the elastic deformation of a virtual contact spring in the vicinity of contact points. The contact stiffness and the exponent are determined from the Hertz's contact theory and F. E. analysis. In order to evaluate the validities and limitations of the proposed methods, an impact tester and the miniature of container, missile and isolators have been provided and tested experimentally. All the experiments were performed with various impact conditions. The results obtained by the proposed methods were directly compared with the measured values in terms of maximum contract force, contact duration, the shape of contact force and the structure responses. The computed contact force and responses, using this proposed methods, were very close to the measured results, unless any plastic deformations were presented.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.89-95
• /
• 2011

이 연구에서는 대표적인 단순물체인 컨테이너선의 거주부를 모델링하여 모형선을 제작하였다. 그리고 거주부 측면에 디플렉터의 설치와 Sunken Deck의 개폐에 따른 거주부 후방의 배기가스 역류방지 효과를 회류수조에서 PIV 기법을 이용하여 계측하였다. 실험 장치는 고속카메라, 레이저, 이미지보드, 대용량컴퓨터로 구성된다. 거주부 후방에서 평균속도벡터와 축방향 속도를 구하여 그 결과를 서로 비교하였다.