• Journal of Advanced Research in Ocean Engineering
• /
• v.4 no.4
• /
• pp.174-184
• /
• 2018

We herein propose a new design procedure of a flexible container ship model where the vertical bending and torsional vibration modes are similar to its prototype. To achieve similarity in torsional vibration mode shapes, the height of the shear center of the model must be located below the bottom hull, similar to an actual container ship with large opening decks. Therefore, we designed a ship model by imparting appropriate stiffness to the hull, using urethane foam without a backbone. We built a container ship model according to this design strategy and validated its dynamic elastic properties using a decay test. We measured wave-induced structural vibrations and present the results of tank experiments in regular and freak waves.

• Journal of Ship and Ocean Technology
• /
• v.5 no.4
• /
• pp.44-50
• /
• 2001

Large container carriers are suffering from lack of knowledge on reliable correlation allowances between model tests and full-scale trials, especially at fully loaded condition, Careful full-scale sea trial with a full loading of containers both in holds and on decks was carried out to clarify it. Model test results were analyzed by different methods but with the same measuring data to figure out appropriated correlations factors for each analysis methods, Even if it is no doubt that model test technique is one of the most reliable tool to predict full scale powering performance, its assumptions and simplifications which have been applied on the course of data manipulation and analysis need a feedback from sea trial data for a fine tuning, so called correlation factor. It can be stated that the best correlation allowances at fully loaded condition for both 2-dimensional and 3-dimensional analysis methods are fecund through the careful sea trial results and relevant study on the large size container carriers.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2006.08a
• /
• pp.13-24
• /
• 2006

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.75
• /
• pp.95-116
• /
• 2017

The global financial crisis has slowed overall growth in the global economy. In addition, uncertainty is increasing in the world economy due to the Trade protectionism, sluggish world trade, and a rise in the rate of interest caused by expansion of fiscal spending by major countries. In this study, we analyzed various factors affecting the container import and export volume, which has a high correlation with export and import of commodities in international trade. In particular, we will examine how exchange rate fluctuations and domestic and overseas economic conditions affect container imports and exports. For the empirical analysis, monthly time series data were used from January 2000 to January 2017. We use the Error Correction Model (VECM) for the empirical analysis and the GARCH model for the exchange rate fluctuation. As a result, container export and import volume had a negative relationship with exchange rate and exchange rate volatility, which had a positive effect on domestic and international economic conditions. However, the effects are different before and after the financial crisis.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.305-319
• /
• 2019

The prediction of the sum of container is very important in the field of container transport. Many influencing factors can affect the prediction results. These factors are usually composed of many variables, whose composition is often very complex. In this paper, we use gray relational analysis to set up a proper forecast index system for the prediction of the sum of containers in foreign trade. To address the issue of the low accuracy of the traditional prediction models and the problem of the difficulty of fully considering all the factors and other issues, this paper puts forward a prediction model which is combined with a back-propagation (BP) neural networks and the support vector machine (SVM). First, it gives the prediction with the data normalized by the BP neural network and generates a preliminary forecast data. Second, it employs SVM for the residual correction calculation for the results based on the preliminary data. The results of practical examples show that the overall relative error of the combined prediction model is no more than 1.5%, which is less than the relative error of the single prediction models. It is hoped that the research can provide a useful reference for the prediction of the sum of container and related studies.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.535-540
• /
• 2010

We present an optimization model for how to assign the freight trains to transshipment tracks and allocate the containers to the freight trains in a rail container terminal. We formulate this problem as a multi-criteria integer programming to minimize the makespan of job schedule and simultaneously to maximize the loading throughput, i.e. the number of containers to be disposed per day. We also apply our model to the instance obtained from the real-world data of the Uiwang Inner Container Depot. From the experiments, we can see an improvement of approximately 6% in makespan, which means that our model can contribute to the improvement of the disposal capacity of containers without additional expansion of facilities.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.61-72
• /
• 1999

This paper presents an estimation method of container handling capacity and selection of resource allocation strategies of container terminals using the computer simulation models. Simulation models are developed to model container terminal consisting of 4 berths considering the berth allocation strategies, crane allocation strategies and the total number of container cranes using Arena simulation package. The proposed models do not consider the yard operations and gate operations. All the input parameters for the models are estimated on the basis of the existing container terminal operation data and the planning data for the automated container terminal planned by Korean government. Four berth allocation strategies and three crane allocation strategies are considered. The total number of container cranes considered ranges from 12 to 15. Non-terminating simulation techniques are utilized for the performance comparison among alternatives. The performance measures such as average ship turnaround time, average ship waiting time, average ship service time, the number of containers handled per year, and the number of ships processed per year are used. The result shows that the berth allocation strategy minimizing the sum of the number of ships waiting, the number of busy container cranes and number of ships handled performs better than any other berth allocation strategies. In addition, the crane allocation strategy allocating up to 5 container cranes per berth performs better than any other crane allocation strategies. Finally there are no significant performance differences among the alternatives consisting of different total number of container cranes allocated.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.1-17
• /
• 2010

This paper focuses on measuring the efficiency of container yards in container terminals in Busan and Gwangyang using Data Envelopment Analysis (DEA) approach. It analyses the relative efficiency of 11 container terminals based on the data for the period between 2006 and 2009 to offer a fresh perspective. The applied framework assumes inputs to be container cranes, transtainer cranes and yard tractors and output as container transshipment volume. Through the analysis, the differences between the impact of using of container cranes, transtainer cranes and yard tractors, top handler & reach stacker on container yard efficiency are measured. Moreover, the associations between the three input factors are analyzed as well. This paper also employs heteroscedastic Tobit model to show the impact of explanatory variables on container yard efficiencies. I took into consideration the strategies for operation of container cranes, transtainer cranes and yard tractors in container yard.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.19-33
• /
• 1999

This paper is concerned with developing a standard costing model based on the case study of PECT and GCT and analysing their profitability in order to improve operation efficiency and design business strategy. In doing so, the model can be a useful tool to analyze current calculation system of lease charge at the two terminals and to judge whether the level of lease charge currently applied to them is justifiable for their profitability. This paper also deals with break-even analysis of container terminal operating companies on the basis of the model and forecast of their profitability. On the top of that, it tries to look into the arguments and to suggest proposals for improving their profitability.

• Journal of Navigation and Port Research
• /
• v.35 no.2
• /
• pp.173-178
• /
• 2011

This study determined the ship replacement life expectancy from an economic perspective. There are many ambiguities in the cost for calculation of economic lifespan, and these were expressed as fuzzy numbers. Also, a fuzzy cost model using fuzzy numbers was developed and suggested as a more practical analysis method than the existing cost model. And the suggested fuzzy model was used to determine the economic lifespan for various types of container ships. As the result, Without fuzziness, the economic lifespan of 5000 TEU Ships was found to be 19 years. it was found that the greater the container ship, the greater the economic lifespan was.