• Advances in Computational Design
• /
• 제2권4호
• /
• pp.283-291
• /
• 2017

High frequency full bridge series resonant inverters have become increasingly popular among power supply designers. One of the most important parameter for a High Frequency Full Bridge Series Resonant Inverter is optimal coil design. The optimal coil designing procedure is not a easy task. This paper deals with the New Approach to Optimal Design Procedure for a Real-time High Frequency Full Bridge Series Resonant Inverter in Induction Heating Equipment devices. A new design to experimental modelling of the physical properties and a practical power input simulation process for the non-sinusoidal input waveform is accepted. The design sensitivity analysis with Levenberg-Marquardt technique is used for the optimal design process. The proposed technique is applied to an Induction Heating Equipment devices model and the result is verified by real-time experiment. The main advantages of this design technique is to achieve more accurate temperature control with a huge amount of power saving.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1654-1663
• /
• 2015

Compared to LC resonance, LCL resonance has distinct advantages such as a large resonant capability, low voltage and current stresses of the power device, constant voltage or current output characteristics, and fault-tolerance capability. Thus, LCL resonant compensation is employed for a movable Inductive Contactless Power Transfer (ICPT) system with a multi-load in this paper, which achieves constant current output characteristics. Peculiarly, the primary side adopts a much larger compensation inductor than the primary leakage inductor to lower the reactive power, reduce the input current ripple, generate a large current in the primary side, and realize soft-switching. Furthermore, this paper proposes an approximate resonant point for large inductor-ratio LCL resonant compensation through fundamental wave analysis. In addition, the PWM control strategy is used for this system to achieve constant current output characteristics. Finally, an experimental platform is built, whose secondary E-Type coils can ride and move on a primary rail. Simulations and experiments are conducted to verify the effectiveness and accuracy of both the theory and the design method.

• 동력기계공학회지
• /
• 제4권1호
• /
• pp.45-50
• /
• 2000

Circuit breakers have traditionally employed mechanical methods to interrupt excessive currents. According to power semiconductor technology advances in power electronic device, some mechanical breakers are replaced with solid state equivalents. Advantages of the contactors using semiconductor devices include faster fault interrupting, fault current limiting, no arc to contain or extinguish and intelligent power control, and high reliability. This paper describes the design of a static $100{\pm}10%V$ and 0 to 50A DC self-protected contactor with 85A "magnetic tripping" and 100A interruption current at $2.2A/{\mu}s$ short circuit of load condition using a new power device the HARRIS MCT (600V-75A). The self-protection circuit of this system is designed by the classical ZnO varistor for energy absorption and turn-off snubber circuit ("C" or "RCD") of the MCT.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2240-2250
• /
• 2016

MIFARE Classic is the most popular contactless smart card, which is primarily used in the management of access control and public transport payment systems. It has several security features such as the proprietary stream cipher Crypto 1, a challenge-response mutual authentication protocol, and a random number generator. Unfortunately, multiple studies have reported structural flaws in its security features. Furthermore, various attack methods that target genuine MIFARE Classic cards or readers have been proposed to crack the card. From a practical perspective, these attacks can be partitioned according to the attacker's ability. However, this measure is insufficient to determine the optimal attack flow due to the refined random number generator. Most card-only attack methods assume a predicted or fixed random number, whereas several commercial cards use unpredictable and unfixable random numbers. In this paper, we propose optimal MIFARE Classic attack procedures with regards to the type of random number generator, as well as an adversary's ability. In addition, we show actual attack results from our portable experimental setup, which is comprised of a commercially developed attack device, a smartphone, and our own application retrieving secret data and sector key.

• Asia pacific journal of information systems
• /
• 제32권1호
• /
• pp.92-124
• /
• 2022

Providing services using kiosks is actively carried out between suppliers and consumers. These service processes have recently begun to play a dominant role in transactions. However, previous self-service technology (SST) studies or kiosks have not fully reflected the changing environment surrounding these different technologies. To cover the updated business environments, we combined qualitative and quantitative research methods. Through qualitative research and a review of previous studies, the variables emphasized as motivations and constraints for kiosks use and those that can be newly illuminated were selected for this study. We then applied the variables to the research model to assess their influence. In terms of the motivations for using kiosks, the results suggest that perceived usefulness and compatibility as service quality, forced use, and perceived service providers' efficiency as provider polices, absorptive capacity, and habit as an individual characteristic and social influence as a subjective norm have a significant effect on the attitude toward kiosks. In terms of constraints, difficult to use and need for interaction predicts the attitude toward kiosks. Attitude toward kiosks, perceived behavioral control, and social influence are directly related to the intention to use kiosks. Lastly, intention to use kiosks plays a significant role as an antecedent of revisit intention. Using these empirical results, we propose both academic and practical implications for future kiosks use.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.293-302
• /
• 2019

In the past, there was a theory that influenza wasn't transmitted directly from birds but was infected to humans via swains. Recently, molecular level research has progressed, and it was confirmed that the avian influenza virus can directly infected to human lung and intestinal epithelial cells. Three pandemicsin the past 100 years were also infected to humans directly from birds. In view of such scientific background, we are developing a method for screening sick birds by monitoring the physiological characteristics of birds in a contactless manner with sensors. Here, the movement of respiratory muscles and abdominal muscles under autonomic innervation was monitored using a magnet and Hall sensor sewn on the thoracic wall, and other multimedia devices. This paper presents and discusses the results of experiments involving continuous periodic noise discovered during flight experiments with a data logger mounted on a Japanese pheasant from 2012 to 2015. A brief summary is given as the below: 1. Magnet and Hall sensor sewn to the left and right chest walls, bipolar electrocardiograms between the thoracic walls, posterior thoracic air sac pressure, angular velocity sensors sewn on the back and hips, and optical reflection of LEDs (blue and green) from the skin of the hips allow observation of periodic vibrations(fasciculations) in the waves. No such analysis has been reported before. 2. These fasciculations are presumed to be derived from muscle to maintain and control air sac pressure. 3. Since each muscle fiber is spatially Gaussian distributed from the sympathetic nerve, the envelope is assumed to plot a Gaussian curve. 4. Since avian trunk muscles contract periodically at all time, we assume that the sympathetic nerve dominates in their control. 5. The technique of sewing a magnet to the thoracic wall and measuring the strength of the magnetic field with a Hall sensor can be applied to screen for early stage of avian influenza, with a sensor attached to the chicken enclosure.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.85-94
• /
• 2022

Recently, consumers who prefer contactless consumption are increasing due to pandemic trends such as Corona 19. This is the driving force for developing the last mile-based logistics ecosystem centered on the online e-commerce market. Lastmile led to the continued development of the logistics industry, but increased the amount of cargo in urban area, and caused social problems such as overcrowding of logistics. The courier service in the logistics base area utilizes the process of visiting the delivery site directly because the courier must precede the loading work of the cargo in the truck for the delivery of the ordered product. Currently, it's carried out as automated logistics equipment such as conveyor belt in unloading or classification stage, but the automation system isn't applied, so the work efficiency is decreasing and the intensity of the courier worker's labor is increased. In particular, small-scale courier workers belonging to the sub-terminal unload at night at underdeveloped facilities outside the city center. Therefore, the productivity of the work is lowered and the risk of safety accidents is exposed, so robot-based loading technology is needed. In this paper, we have derived the top-level concept and requirements of robot-based loading system to increase the flexibility of logistics processing and to ensure the safety of courier drivers. We defined algorithms and motion concepts to increase the cargo loading efficiency of logistics sub-terminals through the requirements of end effector technology, which is important among concepts. Finally, the control technique was proposed to determine and position the load for design input development of the automatic conveyor system.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.18-23
• /
• 2022

이젯 프린팅은 직접적인 비접촉 마이크로 팹기술의 하나로서 노즐과 기판 사이에 강한 전기장을 가함으로써 넓은 범위의 마이크로/나노패턴 어레이를 구현할 수 있는 다목적 팹공정이다. 제조된 고분자/퀀텀닷 마이이크로 패턴의 모양과 두께는 자동화된 프린트 기계에 설치된 노즐 직경과 공정에 사용된 잉크 성분에 일반적으로 정밀한 의존성을 갖는다. 본 논문의 목적은 실험 결과에 영향을 미칠 수 있는 각각의 공정 변수 효과를 설명하기 위해서 이젯 프린팅된 고분자/퀀텀닷의 전형적인 실제 예를 설명하는데 있다. 여기서 우리는 마이크로/나노 해상도로 두께가 정밀하게 제어된 고분자/퀀텀닷 패턴을 제조할 수 있는 몇 가지 이젯 프린팅 공정을 구현하였다.

• 보존과학회지
• /
• 제35권3호
• /
• pp.217-225
• /
• 2019

왕흥사지 치미는 현존하는 우리나라 최고(最古)의 치미로 왕흥사의 동건물지 남측에서 상단이, 북측에서 하단이 출토되었다. 2개의 치미는 조형적 특징이 유사하고 동일한 건물지의 양쪽에서 출토된 점을 미루어 볼 때, 한 쌍의 치미인 것으로 판단되는데, 2점 모두 유실부가 큰 관계로 본래의 모습을 확인하지 못하는 아쉬움이 있다. 따라서 본 연구에서는 왕흥사지 치미의 역사적 가치 회복을 위해 3차원 스캐닝과 컴퓨터 수치제어 기술(computer numerical control, 이하 CNC)을 이용하여 유실부의 복원품을 제작하였다. 유실부 복원은 조형적 특성을 기준으로 진행되었으며, 특히 국내 치미에서 휘어짐 현상이 관찰됨에 따라 실제 편의 휘어지는 방향을 토대로 모델링데이터가 자연스럽게 휘어지도록 수차례 수정하였으며 상 하단 문양의 자연스러운 연결과 경계면의 이격이 발생되지 않는 것에 중점을 두어 진행하였다. 이를 통해 3D 스캐닝과 CNC를 접목한 복원 방법은 비접촉식으로 유물에 손상을 주지 않고 작업성과 재현성이 우수하여 유물 복원에 적합함을 확인하였다. 뿐만 아니라, 모델링 데이터는 반영구적으로 사용이 가능한 바, 유물의 특성에 맞게 활용된다면 향후 문화유산 복원분야를 비롯한 사이버 가상 전시, hands-on 전시와 같은 다양한 형태의 전시와 교구 및 기념품 제작 등 다양한 분야에서도 활발히 활용될 것으로 사료된다.

• 정보보호학회논문지
• /
• 제18권6A호
• /
• pp.63-73
• /
• 2008

RFID(Radio Frequency IDentification) 시스템은 일정한 라디오 주파수 대역을 이용해 무선 방식으로 각종 데이터를 주고받을 수 있는 시스템으로 기본적으로 태그(Tag)와 리더(Reader) 그리고 백-엔드-데이터베이스(Back-End-Database)로 구성된다. 태그에 쓰기(Re-Write)가 가능하고 무선공간에서 다수의 태그를 동시에 인식 가능하다는 장점으로 인해 기존의 바코드 시스템을 대체하여 물류관리, 유통관리, 재고관리 분야에서 널리 사용되고 있다. 그러나 태그와 리더가 무선 주파수를 이용하여 통신하기 때문에 시스템 보안과 개인 프라이버시 침해 문제가 발생한다. 현재까지 RFID 시스템의 이러한 문제를 해결하기 위해 많은 연구가 있었으며 그 결과 다양한 보안 기법들이 제안되었다. 하지만 제안된 많은 보안 기법들은 UHF대역의 국제 표준인 Class-1 Generation-2 태그에는 적용하기 어렵다. 최근에 Chien과 Chen은 Class-1 Generation-2 태그에 적합한 상호 인증 프로토콜을 제안하였지만 이 또한 취약성이 존재하며 데이터베이스에서의 효율성이 떨어지는 문제점이 있다. 따라서 본 논문에서 Chien과 Chen이 제안한 기법을 분석하고 안전성과 효율성을 향상된 새로운 상호 인증 기법을 제안한다.