• Structural Engineering and Mechanics
• /
• 제76권2호
• /
• pp.153-162
• /
• 2020

Aiming at the mechanical and structural characteristics of the contact zone composite rock, the shear tests and numerical studies were carried out. The effects of the differences in mechanical properties of different materials and the normal stress on shear properties of contact zone composite samples were analyzed from a macro-meso level. The results show that the composite samples have high shear strength, and the interface of different materials has strong adhesion. The differences in mechanical properties of materials weakens the shear strength and increase the shear brittleness of the sample, while normal stress will inhibit these effect. Under low/high normal stress, the sample show two failure modes, at the meso-damage level: elastic-shearing-frictional sliding and elastic-extrusion wear. This is mainly controlled by the contact and friction state of the material after damage. The secondary failure of undulating structure under normal-shear stress is the nature of extrusion wear, which is positively correlated to the normal stress and the degree of difference in mechanical properties of different materials. The increase of the mechanical difference of the sample will enhance the shear brittleness under lower normal stress and the shear interaction under higher normal stress.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.571-582
• /
• 2020

Aiming at the mechanical and structural characteristics of the contact zone composite rock, the uniaxial compression tests and numerical studies were carried out. The interaction forms and formation mechanisms at the contact interfaces of different materials were analyzed to reveal the effect of interaction on the mechanical behavior of composite samples. The research demonstrated that there are three types of interactions between the two materials at the contact interface: constraint parallel to the interface, squeezing perpendicular to the interface, and shear stress on the interface. The interaction is mainly affected by the differences in Poisson's ratio and elastic modulus of the two materials, stronger interface adhesion, and larger interface inclination. The interaction weakens the strength and stiffness of the composite sample, and the magnitude of weakening is positively correlated with the degree of difference in the mechanical properties of the materials. The tensile-shear stress derived from the interaction results in the axial tensile fracture perpendicular to the interface and the interfacial shear facture. Tensile cracks in stronger material will propagation into the weaker material through the bonded interface. The larger inclination angle of the interface enhances the effect of composite tensile/shear failure on the overall sample.

• 지구물리
• /
• 제5권1호
• /
• pp.19-27
• /
• 2002

장풍 폐광산의 갱내수와 폐광석 적치장에서 발생되는 산성광산폐수에 의한 침출수의 유동경로와 지화학적 특성을 알아보기 위해 지구물리탐사(자연전위, 전자탐사, 전기비저항, 탄성파굴절법)를 수행하여 그 결과를 지화학 물시료분석(pH, EC, ${SO_4}^{-2}$, 중금속 함량) 자료와 상관·분석하였다. 갱구에 수직 방향의 2개 측선에서 실시한 전기비저항 쌍극자탐사 결과 갱구에서 북서 방향으로 저비저항대가 이어지는데 이것은 갱구에서 지하로 유입된 산성광산폐수에 의한 침출수가 폐석더미와 기반암의 경계를 따라 이동하여 하천 방향으로 유입되어 나타나는 현상으로 해석된다. 이와 같은 양상은 전기비저항 수직탐사, 자연전위, 전자탐사의 반응 결과들에서 보이는 북서방향의 이상대 및 북서쪽에서 상대적으로 높은 값을 보이는 EC, 중금속함량, ${SO_4}^{-2}$의 분포와도 잘 상관된다.